The lid door of the Haier drum washing machine cannot be closed

The reasons are as follows: 1) Check if there is any clothing caught between the window mat and the door.

2) Whether the door fixing screw is loose, causing the door body to sag.

3) Whether the door lock is caught with foreign objects or damaged.

Haier drum washing machines are produced in two production bases in Qingdao and Hefei.

Haier front-loading washing machine performance:

1. Automatic optimization and precise washing: The drum washing machine adopts automatic optimization washing program to accurately locate the washing needs of different fabrics, automatically judge and adjust to the most energy-saving water level and time combination, bringing you the best water level and time combination and bringing you the best washing effect. Accurate positioning, natural water and electricity saving, no wear and tear of clothes, clean and more comfortable.

2. Four major programs, water and electricity saving: the drum washing machine adopts a fast washing program, which greatly saves time, and effectively prevents repeated washing by remembering when the power is off; Time reservation, so that to avoid the first electricity time, inlet and drain overtime protection, to prevent the washing machine from idling for a long time caused by waste, more effective protection of the motor.

3. Efficient heating, saving electricity and worry: The drum washing machine is equipped with a high-efficiency stainless steel heating pipe, which is added with rare metals, which effectively improves the heating effect, reduces power loss, and easily heats the water temperature to 95 degrees.

Hello, thank you for asking the company.

Can you describe the problem in more detail?

There are many reasons why the door can't be closed, but here are a few points:

1) Check if there is any clothing caught between the window mat and the door.

2) Whether the door fixing screw is loose, causing the door body to sag.

3) Whether the door lock is caught with foreign objects or damaged.

You are welcome to ask the company questions again.

We wish you a happy work life

It was forcibly opened, the battery lock tongue was broken, the door could not be buckled, or the door buckle tongue was out of place for a long time.

Haier front-loading washing machine.

The door can't be closed, if it is not just after forcibly opening the door of the drum washing machine, it is mainly because of the power supply, turn off the power and try again.

If you turn off the power and try again, the washing machine door still can't be closed, the reasons and solutions are;

1. The drum washing machine has a safety lock function, which will be automatically opened when the power is on, and the washing machine door naturally cannot be closed, just turn off the power and try again.

2. If the electric door lock of the washing machine is faulty, if the washing machine door cannot be closed due to this reason, it is recommended to ask professional after-sales personnel to repair the electric door lock.

3. If the solenoid valve is broken, it is recommended to find professional after-sales personnel for maintenance.

4. If the computer version fails, it is recommended to find a professional to repair or replace the computer board.

5. If there is a foreign object in the washing machine tank, if this situation causes the washing machine door to be unable to close, it is recommended to remove the foreign object and close the door again.

You can go to Haier after-sales service and ask them to solve the problem for you. If your washing machine is under warranty and is not damaged by man, the repair is free of charge. FYI.

The door cover of the drum washing machine can not be closed, and the plastic cover may be deformed, so you can pat and press, and adjust the high vibration and force to the door cover.

(1) You can pat the handle of the cover with your hand, and rely on the vibration to reset the plastic pin to close the door.

2) If the knob is screwed to the stop gear for a long time and the door still can't be opened, you can screw the knob to any gear again, and after a few seconds, you will hear the sound of the door lock "popping", and then the door can be closed.

3) There is also an emergency switch in the lower right corner of the machine, open the cover on the outside of the drain pump in the lower right corner, you will see a red plastic cable, pull down along the vertical direction of the cable, and you will hear a slight sound of the door lock. It should be noted that if there is water in the bucket or the temperature is too high, the door will not be closed.

You can call ** for repair, but if the official one doesn't work, just look for home appliance maintenance.

Reasons: 1. After long-term use or the door is pressed, the door body sags, and the door hook does not match the door lock.

2. The door can be closed, but the door hook is rubbed against the lower edge of the door lock mouth, the door hook can not reach the maximum stroke, the door can be closed but not locked, and the E1 alarm appears.

3. The emergency pull rope of the electromagnetic door lock product is stuck.

See if the screws around the door are loose, or the program you choose is caused by problems, if these are not, it may be that the door itself is broken, contact the after-sales service to see if it is also possible to adopt.