How to use Haier automatic washing machine, E2 error

Fully automatic washing machines are like this, for safety reasons. You read the instructions carefully.

If you want to wash clothes with the lid open, tell you that there is a contact contact switch under the upper cover, and you can open the lid to wash if you find someone to connect it to death. For your safety, please do not change it indiscriminately, do it according to the instructions).

1. Before using the automatic washing machine, check whether there are hairpins, coins and other items in the clothes that need to be washed, and if so, you need to take them out.

2. Turn on the power of the washing machine, connect the drain pipe, and put the clothes in the washing machine.

3. Add laundry detergent or laundry detergent after the clothes are put in, and the amount of laundry detergent is determined according to the amount of clothes and the degree of dirt. Add laundry detergent and pour it directly into the washing machine, or pour it into the washing machine's own laundry detergent box, then turn on the faucet and close the lid.

4. Press the power switch of the washing machine to select the washing method of the washing machine, the washing method of different washing machines is slightly different, the water level can be selected according to the number of clothes, and the corresponding program can be selected according to the specific material of the clothes.

E2 is generally displayed in the following cases:

1: Caused by too long drainage:

2: You can first check whether the upper cover of the washing machine is covered;

3: Check whether the drain is smooth, if the drain is small, it may be that the drain is blocked with foreign objects, just take it out. 4: Check if the drain motor is damaged.

The lid cannot be opened when spinning, and after opening, it will alarm and stop spinning, which is set for safety. At least choose the washing program and water level before starting to wash, if the landlord's washing machine can choose the washing, spinning time and rinse times, then you can also set these, and nothing else.

Hello, thank you for asking the company.

E2 open the lid alarm, the washing machine is not allowed to open the lid during operation, the shopping mall uses a special demonstration program, which can be operated in the case of opening the cover, the actual user's machine, this situation is not allowed, mainly to ensure that the washing machine is used in a safe environment.

You are welcome to ask the company questions again.

We wish you a happy work life

Normal, protect the washing machine and protect you.

This is true for fully automatic washing machines.

The reason for the failure of Haier's automatic washing machine to show E2 is that the lid on the washing machine is not closed when it is running. Workaround:

1. Open the lid when the washing machine is running, and the machine will report E2 to prompt the user to close the lid. 2. If the E2 alarm still appears after closing the lid and restarting, check that there is a small magnet on the right side of the transparent cover to control the reed switch in the tray base to see if the small magnet has fallen or the reed switch is broken. 3. If the above inspection cannot be solved, you can consult professional after-sales personnel.

This answer applies to any Haier washing machine.

Haier Washing Machine E2 indicates that the upper cover of the washing machine is not tightly covered, which may be caught by clothes and affect the closure. It is recommended to close the lid again, if not, you may have to check the cover to see if the internal switch is broken or the magnetic spring has fallen off, if so, it should be replaced and repaired. If you still can't solve it, you can only contact the after-sales service and the commissioner for on-site maintenance.

Haier's automatic fault alarm shows that E2 is an "open lid alarm", which means that when the machine is running and the lid is in the state of opening the liquid hall, just close the lid.

If the alarm still occurs after the lid is activated, you can check the following locations:

1 The computer board cable and plug-in are falling off and damaged.

2. Whether the door cover switch cannot be closed, opened, corroded, or oxidized.

3. Whether the drain motor is damaged, and the drain port is blocked by foreign objects, resulting in unobstructed access.

If the above problems are found, it is recommended to directly after-sales and find professionals for inspection and maintenance.

Other failures**].

F1: The water level sensor of Haier washing machine is not in good contact.

E1: The drain of the Haier washing machine is overtimed, check whether the drain pipe is blockedE2: The upper cover of the Haier washing machine is not properly covered.

E3: The dehydration of the Haier washing machine is unbalanced, shake the clothes back and dehydrate them againE4: The water inlet of the Haier washing machine is timed out, check the water pressure, and whether the water inlet valve is dirty and blockedE5: The water temperature of the Haier washing machine exceeds 50 degrees.

E6: Does Haier washing machine use high-foam laundry detergent?

Summary. The appearance of e2 in Haier washing machine means that the lid of the washing machine is not properly covered, the user can check whether the lid of the washing machine is stuck by foreign objects, and if there is no foreign object, then close the lid again before trying to run. Common faults of Haier washing machines**:

1. F1 means that there is a problem with the water level sensor of the washing machine, and it is recommended that the user ask the maintenance personnel for maintenance. 2. E3 indicates that there is a problem with the dehydration of the washing machine. 3. E4 means that the water inlet of the washing machine is overtimed, and you can check whether the water inlet valve is blocked.

4. E5 means that the water temperature of the washing machine is too high, and there will be a prompt when it exceeds 50 degrees. 6. E7 means that the operating environment temperature of the washing machine is too low, and the system will start the protection mechanism. 7. E8 means that the voltage is too low.

8. E9 means that the voltage is too high.

The appearance of e2 in Haier washing machine means that the lid of the washing machine is not properly covered, and the user can check whether the lid of the washing machine is stuck by a foreign object, and if there is no foreign object, then the lid will be closed again before trying to run. Common faults of Haier washing machines**: 1. F1 indicates that there is a problem with the water level sensor of the washing machine, and it is recommended that the user ask the maintenance personnel for maintenance.

2. E3 indicates that there is a problem with the dehydration of the washing machine. 3. E4 means that the water inlet of the washing machine is overtimed, and you can check whether the water inlet valve is blocked. 4. E5 means that the water temperature of the washing machine is too high, and there will be a prompt when it exceeds 50 degrees.

6. E7 means that the operating environment temperature of the washing machine is too low, and the system will start the protection mechanism. 7. E8 means that the voltage is too low. Qiaohuai 8 and E9 indicate that the voltage is too high.

Fellow, I really didn't understand, I can be more specific.

The appearance of e2 in Haier washing machine means that the lid of the washing machine is not properly covered, and the user can check whether the lid of the washing machine is stuck by a foreign object, and if there is no foreign object, then the lid will be closed again before trying to run. Common faults of Haier washing machines**: 1. F1 indicates that there is a problem with the water level sensor of the washing machine, and it is recommended that the user ask the maintenance personnel for maintenance.

2. E3 indicates that there is a problem with the dehydration of the washing machine. 3. E4 means that the water inlet of the washing machine is overtimed, and you can check whether the water inlet valve is blocked. 4. E5 means that the water temperature of the washing machine is too high, and there will be a prompt when it exceeds 50 degrees.

6. E7 means that the operating environment temperature of the washing machine is too low, and the system will start the protection mechanism. 7. E8 means that the voltage is too low. Qiaohuai 8 and E9 indicate that the voltage is too high.

Summary. The reason for the failure of the Haier washing machine to show the E2: the lid on the washing machine is not closed when it is running.

1.Open the lid when the laundry machine is running, and the machine will report E2 to prompt the user to close the lid. 2.

If the E2 alarm still appears after closing the lid and restarting, check that there is a small magnet on the right side of the transparent cover to control the reed switch in the tray base to see if the small magnet has fallen off or the reed switch is broken.

The reason for the failure of the Haier washing machine to show the E2: the lid on the washing machine is not closed when it is running. 1.

Open the lid when the laundry machine is running, and the machine will report E2 to prompt the user to close the lid. 2.If the lid is closed and restarted and the E2 alarm appears, check that there is a small magnet on the right side of the transparent cover, which is used to control the trillion-clear trace reed switch in the tray base to see if the small magnet has fallen off or the reed switch is broken.

Can you add, I don't quite understand it.

The reason for the failure of the Haier washing machine to show the E2: the lid on the washing machine is not closed when it is running. 1.

Open the lid when the laundry machine is running, and the machine will report E2 to prompt the user to close the lid. 2.If the lid is closed and restarted and the E2 alarm appears, check that there is a small magnet on the right side of the transparent cover, which is used to control the trillion-clear trace reed switch in the tray base to see if the small magnet has fallen off or the reed switch is broken.