The Haier 7288 washing machine does not dehydrate

Your washing machine is a wave-wheel automatic washing machine, how can there be a delay switch? (Drum machine will only have).

The automatic washing machine should be transferred to the dehydration program after washing and draining, if it cannot be spun dry, it can be checked from the following aspects:

1) Whether the laundry is seriously biased to the side of the dehydration bucket, or the laundry is placed too much and the dehydration bucket does not work.

2) The plug contact of the door closure switch is poor, and it is more likely that the connectors and wires are normal ---.

3) Check whether there is any foreign object between the dehydration bucket and the water bucket.

4) If the V-belt is too loose or falls off, the belt can be adjusted or replaced.

5) The large oil seal is not installed properly and jams the dehydration shaft. (Generally, it is easy to occur after replacing the large oil seal during maintenance) 6) The brake belt is not loosened.

7) Program control board failure.

Most likely, the water level switch or water level sensor is faulty (or the air pipe connected to it is leaking) and the information that has been drained cannot be fed back to the computer to perform the next dewatering work, it is recommended to replace the water level switch or water level sensor first, and do not forget to check the air leakage problem of the connected air pipe.

Some models are equipped with a non-dehydration button, and the washing machine is not dehydrated. First of all, you should check if the non-dehydration key is pressed. If this button is pressed, the washing machine has an anti-wrinkle function and does not dehydrate the laundry. As long as the non-dehydration button is raised, the washing machine can be dehydrated.

Hello, thank you for asking the company.

Dear, please describe your problem in detail, thank you.

You are welcome to ask the company questions again.

We wish you a happy work life

Summary. Hello: Haier washing machine 70-m8286 does not enter the water Reason:

1. First of all, we must see whether the power is turned on, turned on and operating normally, if the washing machine has not started to work, of course, it will not enter the water. 2. If the door lock indicator light is not on, then check whether the washing machine door has been closed, if it is not closed, reopen and close again, and the problem of no water will be solved. 3. If the washing machine door has been closed, press the door handle lock again, and the door lock light will be on, indicating that the problem is in the micro delay.

It is necessary to reinstall the micro-delay and adjust the position of the door lock. 4. Sometimes it is because there is dirt blocking the filter screen of the washing machine's water inlet valve port, so you can not enter the water, at this time, you only need to remove the filter and clean it before reinstalling it. 5. Open the upper cover, check whether the inlet valve coil is in good condition, use a multimeter to measure whether its resistance value is normal, if the measured value is infinite, it means that the inlet valve coil is burned out and does not enter the water, and it is good to replace the new inlet valve directly.

Hello: Haier washing machine 70-m8286 does not enter the water Reason: 1, first of all, we must see whether the power is connected, turned on and operating normally, if the washing machine has not started to work, of course, it will not enter the water.

2. If the door lock indicator light is not on, then check whether the washing machine Huiqing Bird door has been closed before, if it is not closed, reopen and close it again, and the problem of not entering the water will be solved. 3. If the washing machine door has been closed, press the door handle lock again, and the door lock light will be on, indicating that the problem is in the micro delay. It is necessary to reinstall the micro-delay and adjust the position of the door lock.

4. Sometimes it is because there is dirt blocking the filter screen of the washing machine's water inlet valve port, so you can not enter the water, at this time, you only need to remove the filter and clean it before reinstalling it. 5. Open the upper cover, check whether the inlet valve coil is in good condition, use a multimeter to measure whether its resistance value is normal, if the measured value is infinite, it means that the inlet valve coil is burned out and does not enter the water, and it is good to replace the new inlet valve directly.

It's still the same.

Dehydration is normal, but it doesn't get water.

Pro: I replaced the new water inlet valve, that is: 1. The water inlet relay on the control panel in the washing machine is damaged; 2. Poor contact between internal plug-in lines.

Pro: We judged that when the washing machine did not enter the water suddenly, after observation, it was found that the washing machine had not reached the set water level height in the process of entering the water, and the number of times it appeared was relatively large, so it may be that the water level switch of the washing machine was faulty, and then you can choose to buy a water level switch again or ask a special maintenance personnel to come to the door for maintenance.

Summary. Hello dear, the reason why the Haier washing machine does not enter the water 1, the filter screen of the inlet valve of the Haier washing machine is blocked. 2. The water ingress relay of the control panel of Haier washing machine is damaged.

3. The water inlet solenoid valve of Haier washing machine is faulty, resulting in Haier washing machine not entering water. 4. If there is no "buzzing" sound in the inlet valve, the problem may be on the computer board, and the computer board needs to be replaced. 5. The water solenoid valve and relay of Haier washing machine do not enter the water due to the occurrence of water.

Hello dear, the reason why the Haier washing machine does not enter the water 1, the filter screen of the inlet valve of the Haier washing machine is blocked. 2. The water ingress relay of the control panel of Haier washing machine is damaged. 3. The water inlet solenoid valve of Haier washing machine is faulty, resulting in Haier washing machine not entering water.

4. If there is no "buzzing" sound in the inlet valve, the computer board needs to be replaced. 5. The water solenoid valve of Haier washing machine and the relay Tanlu bureau do not enter the water due to the accident.

Hello dear, what should I do if the Haier washing machine does not enter the water1, check whether the power supply is plugged in, see if the water source is turned on, and exclude some reasons why the washing machine does not enter the water due to negligence. 2. Check the settings of the Haier washing machine, if you press the start button, the washing machine does not. If the inlet valve does not have a "buzzing" sound, Hui means that the inlet valve is not working, it may be that the inlet valve is broken, and it may be better to have a better inlet valve.

3. If the washing machine stops suddenly before the set water level height is reached, it may be that the water level switch or water level sensor laughing roller is broken.

Summary. Haier QB85-BF15288 washing machine does not dehydrate pro, hello For your problem I make the following solution: Answer:

1.Check that the washing machine is properly connected to the power supply; 2.Check whether the washing machine is dehydrated; 3.

Check that the filter of the washing machine is clean; 4.Check the washing machine's water pipes for blockages or broken and leaking water; 5.If none of the above methods can be solved, you can try resetting the washing machine, and it may restore its function.

Some washing machines will not spin properly due to improper temperature settings; 3.If you want to make the dehydration effect of the washing machine better, you can add a rinse when dehydrating to reduce stains and dirt in the clothes; 4.Cleaning the filter of the washing machine regularly can greatly improve the dewatering efficiency of the washing machine.

Haier QB85-BF15288 washing machine does not dehydrate.

Haier QB85-BF15288 washing machine is not dehydrated, hello For your problem, I make the following solutions: Answer: 1

Check that the washing machine is properly connected to the power supply; 2.Check whether the washing machine is dehydrated; 3.Check that the filter of the washing machine is clean; 4.

1.Before each spinning of the washing machine, the machine should be filled with water, and then the spinning function should be turned on; 2.The dehydration function of some washing machines will not be able to dehydrate normally due to improper temperature setting; 3.

If you want to make the dehydration effect of the washing machine better, you can add a rinse when the washing machine is dehydrated to reduce the stains and dirt in the clothes; 4.Cleaning the filter of the washing machine regularly can greatly improve the dewatering efficiency of the washing machine.

Does this washing machine have water to dehydrate? Can't an empty bucket perform the dehydration function?

Of course, <>

The reasons why Haier's automatic washing machine does not enter the water and does not spin when it is dehydrated are as follows:

1. The faucet of Haier's automatic washing machine and the water injection solenoid valve of the washing machine are not connected.

2. The water inlet valve or water level switch of Haier automatic washing machine is damaged, resulting in the Konka washing machine not being able to enter the water.

3. Haier's automatic washing machine cannot enter the water due to damage.

4. The water level sensor of Haier's automatic washing machine is faulty.

The solution of Haier's automatic washing machine does not enter the water and does not turn when it is dehydrated:

1. Find the Haier automatic washing machine after-sales service center for inspection and maintenance. Pin bucket.

2. Replace the water level sensor.

3. The water injection solenoid valve of the faucet and the washing machine can be reconnected to Bidouling.

Summary. Pro, the reasons why Haier washing machines are not dehydrated: 1

It may be that the panel door of the washing machine is not closed well or the switch of the top cover is damaged, or it may be that the switch is in poor contact, because the washing machine is a high-speed action when dehydrating, and the top cover is not allowed to be opened, so there is a linkage switch on the top cover, and the cover circuit will be automatically disconnected as soon as the cover is opened, check whether the top cover is well covered, or it may be that the top cover sensor is faulty and needs to be replaced; 2.It may be caused by the blockage of the drainage system of the washing machine or the broken drain valve, the washing liquid in the water cylinder can not be discharged, or there is too much foam in the water cylinder, the washing liquid in the cylinder is difficult to drain for a while, the water level switch cannot be reset, the washing machine can not enter the dehydration program, and you can wait until the foam is discharged to enter the dehydration process; 3.The drain valve does not pull the clutch conversion apart, and if the solenoid valve is damaged, it will also make the dehydration unable to operate normally; 4.

It may be that when the clothes are not put away, the clothes are not balanced during the washing process, and the washing items cannot be adjusted when the washing machine is not adjusted.

Haier automatic washing machine XQB70 Z9288 clothes machine, normal to the point of no dehydration during washing.

I'm still a little confused, can you be more detailed?

Pro, the reasons why Haier washing machines are not dehydrated: 1It may be that the panel door of the washing machine is not closed well or the switch of the top cover is damaged, or it may be that the switch is in poor contact, because the washing machine is a high-speed action when dehydrating, and the top cover is not allowed to be opened, so there is a linkage switch on the top cover, and the cover circuit will be automatically disconnected as soon as the cover is opened, check whether the top cover is well covered, or it may be that the top cover sensor is faulty and needs to be replaced; 2.

It may be caused by the blockage of the drainage system of the washing machine or the bad drain valve, the washing liquid in the water cylinder can not be discharged, or there is too much foam in the water cylinder, and the washing conglomerate in the cylinder is difficult to drain for a while, the water level switch cannot be reset, and the washing machine cannot enter the dehydration program, and it can wait until the foam is discharged to enter the dehydration process; 3.The drain valve does not open the clutch conversion of the seepage stool, and if the solenoid valve is damaged, it will also make the dehydration control unable to operate normally; 4.It may be that when the clothes are not put away, the clothes are not balanced during the washing process, and the washing items cannot be adjusted when the washing machine is not adjusted.

Hello, the reasons and solutions for the failure of Haier drum washing machine to dehydrate normally are as follows: 1. When the washing machine is not dehydrated, first check whether there is water in the washing machine, and if there is water, you can open the drain valve first to see if there is any foreign matter inside. Method:

To disconnect the power supply, you can first open the front bezel of the washing machine, unscrew the drain valve in the lower right corner, and drain the water. Generally, the computer board of the washing machine will show a "5e" fault if there is no drainage**, if there is a foreign object, install the drain valve switch after taking it out, and the test machine should be normal. 2. If the clothes are placed too little or not released, the washing machine will be unbalanced when it is dehydrated, but the washing machine itself can still be balanced.

In this case, the method is: open the door and take out the clothes, shake them and put them in, you can restart the washing machine to a single dehydration program, and the washing machine will readjust the dehydration after starting, and press the washing machine to see if it is placed stable. If the above two situations cannot be solved, it is unlikely that the performance of the washing machine has failed, and engineers need to come to repair it.