After buying a spherical faucet, how should I see the switch status?

Regarding how to see the switch status of the spherical faucet, there are mainly the following points.

1.Valve connection pipe for spherical faucets

The two ends of the spherical valve water pipe are different, one end is connected to the whole, and the other end is screwed on. The ball valve can be removed by unscrewing the end with the screw buckle and removing the handle shaft. Then you can see how it is connected at a glance.

2.The working principle of the spherical valve faucet: the height of the screw is adjusted by rotating the handle, so as to adjust the cross-section of the water flow, adjust the amount of water, see the porcelain plate structure, and adjust the water inlet and water ratio by the displacement of the upper and lower ceramic plates, so as to control the control of cold and hot water with a single handle, and there is also a ceramic core that controls the amount of water separately.

The two ends of the spherical valve water pipe are different, one end is connected to the whole, and the other end is screwed on. The ball valve can be removed by unscrewing the end with the screw buckle and removing the handle shaft. Then you can see how it is connected at a glance.

The two ends of the spherical valve water pipe are different, one end is connected to the whole, and the other end is screwed on. The ball valve can be removed by unscrewing the end with the screw buckle and removing the handle shaft. Then you can see how it is connected at a glance.

2.The working principle of the ball valve type water distribution faucet

Adjust the height of the screw by rotating the handle, so as to adjust the cross-section of the water flow, adjust the amount of water, see ** porcelain piece structure, rely on the displacement of the upper and lower ceramic pieces to adjust the water intake and water inlet ratio, etc., so as to control the realization of a single handle to control the hot and cold water, and there is also a ceramic core that controls the amount of water separately. Adjust the height of the screw by rotating the handle, so as to adjust the cross-section of the water flow, adjust the amount of water, see ** porcelain piece structure, rely on the displacement of the upper and lower ceramic pieces to adjust the water intake and water inlet ratio, etc., so as to control the realization of a single handle to control the hot and cold water, and there is also a ceramic core that controls the amount of water separately. <

3.Globe valve type water faucetofHandlebar direction

The handle direction of the ball valve faucet is the same as that of the ordinary faucet, the handle is closed when the water outlet is opposite, and the right opening is open at right angles to the faucet. The spherical self-sealing faucet adopts the spherical spool and the bevel of the cone hole of the valve body.

Tangent seal design, the valve core is made of solid core, so it has the advantages of not easy to deform, good sealing performance, and at the same time the combination of water pressure and mechanical sealing, so that the valve has the characteristics of water pressure closure and mechanical opening and closing. <>

The above is the structure and principle of the spherical faucet switch, and if you understand these, you will know how to see the switch status.

The first method: when there is water out, it is on, and if there is no water, it is turned off.

The second method: the faucet will generally add some small markings, such as small dots, you can look for them.

The third method: according to convention, the faucet is on clockwise and off counterclockwise. Twist it counterclockwise to the end, and it's closed.

There should be a hint on the top, there will be a downward arrow mark on the spherical faucet, and there will be a red - and a green - below, generally to red - to stop - green - to start.

There should be red lights and switches on top of this spherical faucet, which can be seen and carefully observed, and then don't reverse it when it is installed, pay attention to the direction.

The ball valve is a ball under the switch of the faucet, the ball is close to the faucet pipe wall, there is a round hole on the ball, when the direction of the round hole is the same as the direction of the faucet pipe, the water can pass through the round hole, when the switch is toggled, the direction of the round hole is different from the direction of the pipe, the water flow slows down or stops.

This mainly depends on the way of switching, if it is a square hole in the middle, the center of the middle is (square) rotating, there will be a line at the top, a groove or, a raised part, this sign is horizontal, it is closed, and when it is vertical, it is open.

The valve water connection pipe of the spherical faucet, the two ends of the ball valve water connection pipe are different, one end is connected to the whole, and the other end is screwed up. The ball valve can be removed by unscrewing the end with the screw buckle and then removing the handle shaft. Then you can see how it is connected at a glance.

Method 1, if there is water flowing out, it is on, and if there is no water flowing out, it is closed; Method 2: Generally, there will be a mark on the faucet to distinguish the direction of the switch according to the mark; Or according to custom, clockwise is off, counterclockwise is on.

Spherical faucets have been used more and more by the majority of households. This kind of faucet has many advantages, such as water saving, stable water flow, long life, etc., and is becoming more and more popular. So if you buy a new spherical faucet at home, how should you see the switch status?

Let's take a look. <>

1. Ball faucets generally include a host and a water flow switch. After the host is installed, there is basically no need to set it, and the water flow switch is mainly used to control the size and shutdown of the water flow. Generally speaking, the inside of the faucet is equipped with a motor and a heating chamber, these two devices are very important, usually pay attention to maintenance, once damaged, the faucet will lose its effect.

Generally speaking, there are two switches in the faucet, as long as the heating switch is turned on, the faucet will rely on the pressure of the water to start the power. This design is very scientific. Because the pressure of the water is high, it can be lifted under electric shock.

After jacking, the lower electric shock will be combined with the upper electric shock, and the heating system will be turned on. <>

But there is a question here, that is, if the water pressure in the home is low, can the switch be turned on? The answer is yes, but due to the unstable water pressure at home, it will also cause obstacles in the contact of the switch, which can speed up the damage of the faucet and reduce the service life of the faucet for a long time. Therefore, friends with relatively small water pressure at home are advised not to use this faucet again.

If it is damaged after one month of use, the manufacturer may not repair it free of charge. Because this problem has been clearly stated in the manual, everyone should be aware of this.

In addition, there are some necessary precautions to share with you.

Faucets are prone to leakage at the pipes, which is a problem that is especially prone to occur after half a year of use. At this time, you can remove the cap of the faucet and re-tie it at the header. Or just replace it with a new U-tube gasket and you can solve it perfectly.

In addition, the water-stopping tape is also prone to damage, so it is recommended to replace it every three months or so.

Often there will be some marks on the faucet, and the position of turning on the faucet and turning off the faucet is also different, and you can see the status of the switch through this detail.

This kind of faucet switch is still relatively good, and we can also be familiar with this switch state and slowly adapt, which can also save water resources very much.

You can observe the status of the switch through the display of the faucet, because you can see the switch on the display.

At this time, you should check the manual, and be sure to look at the position of the bulge, and also pay attention to the horizontal position and vertical position of the sign, which should generally be judged according to the position in the middle.