The ant protection board can t be scanned, and the ant protection board can be connected to the mobi

Bluetooth is automatically disconnected.

You can turn the Bluetooth connection back on, and you can scan it again. The resistance discharge on the protection board will heat up, affected by heat dissipation, the size of the protection board, and the resistance with high power will not be used, so the equilibrium current is very small, and the discharge is a pure power consumption behavior.

Power battery protection board, as the name suggests, is used to protect the battery from damage and prolong the life of the battery. Moreover, it only provides the most stable and effective protection against accidents in the event of extreme problems with the battery. Of course, monitoring work is a must, just like a fuse or cutout in our home appliances.

Summary. Hello, if the Ant software cannot be connected to the old protection board, it is due to compatibility issues between the software and the hardware. In this case, you can use the following workaround:

1.Check the connection: Make sure that the connection you are using is compatible with the protection board.

Make sure that you are using the correct interface and communication protocol to connect to the protection board. 2.Update Software and Firmware:

Check if there is a new version of Ant software and the firmware of the protection board is available. If so, try updating the software and firmware to ensure compatibility between them. 3.

Restart your device: Try restarting the Ant software and protection board, which can fix the temporary connection issue. 4.

Hello, if the Ant software cannot be connected to the old protection board, it is due to compatibility issues between the software and the hardware. In this case, you can use the following workarounds:1

Check the connection: Make sure that the connection you are using is compatible with the protection board. Make sure to use the correct interface and communication protocol for the cable source as connected to the protection board.

2.Update Software and Firmware: Check if there is a new version of Ant software and the firmware of the protection board available.

If so, try updating the software and firmware to ensure compatibility between them. 3.Restart your device:

Try restarting the Ant software and protection board, which can fix the temporary connection issue. 4.Check the configuration settings:

Make sure that the configuration settings of Ant Software and the protection board are correct. Check settings such as communication parameters, IP addresses, ports, etc., to make sure they match and are compatible.

Is there an easier solution?

This is already the most common solution, you can now try restarting the software and the protection board first.

Summary. I once tried to connect the phone to the ant protection board without scanning the code, but it didn't work. SolutionDue to the security of the ant protection board, it is impossible to connect the mobile phone without scanning the code.

It is recommended that you can scan the QR code to connect to the ant protection board, which can better protect the security of your mobile phone. Extension: In addition, you can also use other features of the Ant Protection Board, such as Home Sharing, Home Security, etc., to better protect your phone.

I once tried to connect the phone to the ant protection board without scanning the code, but it didn't work. Due to the safety of the ant protection board, it is impossible to connect to the mobile phone without scanning the code. It is recommended that you can scan the QR code to connect to the ant protection board, which can better protect the security of your mobile phone.

Extension: In addition, you can also use other features of the Ant Protection Board, such as Home Sharing, Home Safe Closed Travel, etc., to better protect your phone.

Fellow, I really didn't understand, I can be more specific.

Yes, you can connect to your phone via Bluetooth or Wi-Fi without having to scan the QR code. The ant protection board supports Bluetooth and Wi-Fi BGN, which can support your mobile phone to connect to the potato banquet. In addition, Ant Protection also supports most of the security encryption technologies that sell silver, which can effectively protect your data security.

Answer: If the ant protection board is broken, it may cause ants to enter the house or destroy the home decoration.

Explanation: Ant protection panels are usually installed under doors, windows, or porches, and their role is to prevent ants from entering the house. If the protection is broken, it will lose its anti-ant effect, and ants may enter the room.

At the same time, the protective board can also beautify the appearance of doors, windows or porches, and once damaged, it will affect the aesthetics of home decoration.

Expansion: To prevent ants from entering the room, the following measures can be taken:1

Regularly clean households with wide hands, especially areas prone to food debris such as kitchens and dining rooms, to reduce ant food**; 2.Plugging possible gaps and cracks, such as door and window gaps, wall corners, floor gaps, etc.; 3.Use ant control drugs such as sprays, mosquito coils, etc.

Ant protection board refers to a special board used to protect ants in construction projects. If the ant protection board is broken, it will affect the living environment of the ants. The destruction of ant protection panels may cause changes in environmental conditions such as temperature, humidity, and light inside the building, which may affect the growth and reproduction of ants.

In addition, damaged ant protection panels can also cause ants to leave their original habitat or even enter the interior of the building to cause trouble. Therefore, if the ant protection board is broken, it should be repaired or replaced in time to protect the living environment of ants and the safety of building debris.

If the ant protection plate is broken and damaged, it may cause the ant to escape or suffer injury. The function of the ant protection plate is to protect the life safety of ants and prevent them from escaping or collapsing people from being injured by the outside world. If the ant protection board is broken, it needs to be repaired or replaced in time to ensure the safety and health of the ants.

Ant protection board plays an important role in the life of ants, it can protect the safety of ants and maintain the stability of the entire ant society. If the ant protection plate is broken, it will affect the life of the ant. First of all, the ant protection plate is a part of the ant's living area, if the protection plate is damaged, it will affect the structure of the ant nest, resulting in the ant habitat is not safe enough;Secondly, on some necessary paths, if the ant protection plate is damaged, it will hinder the ant's suspicious movement path and make it impossible to complete the task smoothly.

Therefore, for the survival and development of ants, ant protection plates are indispensable.

Ant protection board is a kind of anti-seepage protection device used to prevent ants from entering the house or building, once it is damaged, it will lose its protective effect. If the ant protection board is broken, it may cause some problems, such as ants entering the house and invading daily life, bringing trouble and annoyance;In addition, ants can build nests in walls, damage structures, and cause damage to homes. Therefore, in order to avoid these problems, once the ant protection board is found to be damaged, it should be repaired or replaced immediately to ensure the continuous performance of its function.