What does it mean that there is a clear sound of gas deflating when the gas is turned on?

As soon as the gas is turned on, there is a pronounced sound of gassing, which means the sound of air flowGas canistersThe pressure is large, and when it is opened, the high-pressure gas in the gas tank needs to pass throughPressure reducing valvesAfter decompression, the ignition can be used normally, and the process of decompression will produce airflow noise.

During the use of gas, it is necessary to ensure that the gas cannot leak, because after the gas and air are mixed, the first mixed gas will be produced. When the gas concentration reaches the lower limit, it occurs when an ignition source (the ignition energy is usually very small).

When you usually use it, if you smell the smell of gas, (the city pipeline gas is generally added with odorant) to open the doors and windows first, and check whether the valves, pipeline joints, hoses, stoves, etc. are loose, leaking, falling off, etc. When checking the leakage of the pipeline valve, it is strictly forbidden to test the leakage with an open flame, and you can apply soapy water to the inspection place to see if there are bubbles.

Liquefied gas tanks. How to deal with the sound of air leakage:

1. Turn off the natural gas switch immediately. When you feel that there is a leak in natural gas, you should immediately tighten the valve of the gas cylinder to make as much effort as you can. Handle the valve on the gas cylinder, and tighten it on the gas stove to prevent the rubber bottom of the cylinder valve from leaking.

2. Do not turn on or off any electrical switches. When there is a leak of natural gas, try not to turn on the switch of the electrical appliance, otherwise it is easy to cause unexpected dangers.

3. Open doors and windows for ventilation. When smelling natural gas leakage, it is necessary to open the doors and windows as soon as possible to exhaust the gas outward, which is a more important point of gas leakage, and let the gas disperse as quickly as possible.

4. Cover your mouth and nose and flee the scene. If the liquefied gas leak is serious and the above methods are still ineffective, cover your mouth and nose immediately, and then quickly run outside to avoid carbon monoxide poisoning.

5. Call the fire alarm**. If the liquefied gas leakage is serious, call the fire alarm as soon as possible, and do not delay the rescue time. It also prevents the occurrence of dangerous situations such as fires.

is normal. useGas canistersThe sizzling sound should be caused by the pressure change during use, and it will sound quicklyPressure reducing valvessounds. As long as there is no air leakage, it is normal.

When opening the gas tank, the high-pressure gas in the gas tank needs to be depressurized by the pressure reducing valve before it can be ignited and used normally, and the process of decompression will produce airflow noise.

The gas tank has been used for a long time, the sealing gasket in the valve is worn, and there is a small air leak when the valve is opened.

You can make soapy water with soap, apply the soapy water to the hose and joints, if there is bubbling, it is leaking. At the same time, don't forget to check the tube for aging and leakage. It is necessary to check the skin pipe, rubber pipe, stove switch, pressure reducing valve and the connection part of the handwheel to the bottle valve are the parts that are more likely to leak, and the inspection part should be painted with soapy water to check the air leakage.

It is normal for the gas to open with obvious gas deflation sound, the pressure in the gas tank is large, and the pressure changes in the process of use, which will make a hissing sound, which is actually the sound of the pressure reducing valve, as long as there is no air leakage, it is a normal phenomenon.

If you smell a peculiar smell when not using gas, you should immediately check whether there is a leak in the gas facility, and the method of inspection can be to apply soapy water to the joint of the hose, if there is bubbling, it is a leak. At the same time, don't forget to check whether the tube is aging and leaking. It is strictly forbidden to conduct inspections with open flames.

If there is a phenomenon of falling off or being damaged and old, it must be updated in time if it is found to be cracked or aged.

Note 1: After using gas, be sure to close the stove switch and gas pipeline valve at the same time;

2. Always check whether the hose connection is fixed with clips and whether the hose is aged or cracked;

3. If you find a peculiar smell, immediately open the doors and windows, and call the gas company in time to report the leakage;

4. Gas must be ventilated for a long time;

5. Please carefully read the gas safety publicity content on the back of the gas purchase invoice;

6. Be sure to use gas appliances that meet national standards, and it is strictly forbidden to use infrared cookers.

Summary. As soon as the gas is turned on, there is a distinct sound of gassing, which is the sound of gas passing through the pipe, which is normal.

If you hear the sound of gas being deflated and smell the gas, you should first open the doors and windows, keep the air circulating, and check whether the valves, pipeline joints, hoses, stove connections, etc. are loose or falling off.

As soon as the gas is turned on, there is a noticeable sound of gassing.

As soon as the gas is turned on, there is a distinct sound of gassing, which is the sound of gas passing through the pipe, which is normal. If you hear the sound of gas defotion and smell of gas, you should first open the doors and windows, keep the air circulating, and check whether the valves, pipelines imitate the code joint hose, and which connection of the stove is loosened or falling off.

The sizzling sound made by using a gas tank should be caused by the pressure change during use, and the sound will be the sound of the pressure reducing valve. As long as there is no air leakage, it is normal.

Hope it helps! Kiss.

After the gas tank ran out of gas, it went to fill the gas and came back, and the gas leaked when it was connected to the interface.

If you find the leakage of the gas tank interface, you should close the main valve of the gas tank in time, and then take the pressure limiting valve of the gas tank in a clockwise direction, check the sealing ring at the connection between the pressure relief valve and the gas tank in the virtual hall, check whether it is damaged, if it is damaged, you need to replace the spare sealing ring, if it is not damaged, you need to place the sealing ring in the standard position, and then re-counterclockwise, and the pressure limiting valve can be screwed on the poor draft to solve this problem.

Take a look, dear!

Dear, if there is only a sound and no smell of air leakage, it is normal!

There is a smell. Pro, there is gas should close the main valve of the gas tank in time, and then remove the pressure limiting valve of the gas tank in the clockwise direction, check the sealing ring at the connection between the pressure relief valve and the gas tank, check whether it is damaged, if it is damaged, the trapped beam needs to replace the spare seal mold seal, if there is no damage, you need to place the sealing ring in the standard position, Wang Tanyun and then re-counterclockwise, the pressure limiting valve can be screwed on and tightened to solve this problem.

It will make a hissing sound, which is actually the sound of the pressure reducing valve, as long as there is no air leakage, it is normal.

When using gas, it is necessary to ignite the fire and then open the, and after ignition, if you find that the combustion is not good, you should adjust the air conditioning plate in time to make the flame blue, but the flame can not be separated from the stove. During use, personnel should not leave the stove for a long time to prevent the wind from blowing and the soup from extinguishing the flame. Sometimes when the gas pressure is too low, it will suddenly turn off, so don't be careless.

Precautions for using gas

The choice of cooktop is also crucial, and products of reliable quality should be chosen. Try not to let the food spill when cooking, otherwise it is easy to extinguish the fire and leak gas. In addition, ventilation should be maintained during use.

When there is a smell of gas in the house, do not turn on the lights, and turn off the refrigerator from the water heater. Anything that has an open flame or can generate static electricity should not be used. The length of the gas glue hose should not exceed 2 meters.

Do not place the gas pipe near the stove surface to avoid being grilled by the flame. Do not go through walls, doors and windows.

OpenGas canistersThe sound heard is the sound of air flow, the pressure in the gas tank is high, and when it is opened for use, the high-pressure gas in the gas tank needs to pass throughPressure reducing valvesAfter decompression, the ignition can be used normally, and the process of decompression will produce airflow noise.

Pay attention to observe whether the fire cover of the burner is deformed, it is normal for the burner to be deformed, and the burner head needs to be replaced. It may be that the damper of the stove is opened too much, and the damper opening can be appropriately reduced until there is a slight whirring sound when burning and there is no flame and yellow flame. There is not much gas left in the gas stove, so the gas tank can be replaced and the fire can be lit again.

The pressure is not adjusted properly, and the valve is readjusted.

Precautions for the use of gas.

After installation, protective measures should be taken, especially when tiles need to be pasted. The lamp cannot be dismantled or modified at will, nor can it be placed on the other party's debris to avoid pressing the pipeline, causing damage and causing leakage hazards. If the pipeline needs to be moved, you should ask a professional to help, and do not talk about the robot yourself to ensure safety.

Pipes should not be installed in rooms, and flammable and explosive items should not be placed near pipes to avoid danger. If there is a leak in the pipeline, the valve should be closed first, and then the doors and windows should be opened for ventilation.