-
When cleaning the stainless steel thermos cup, not only the mouth of the cup should be cleaned, but also the bottom and wall of the cup should not be ignored, especially the bottom of the cup, which is not usually cleaned, and may precipitate a lot of bacteria and dirt. But when cleaning the stainless steel thermos cup, it is not enough to simply rinse it with water, it is best to brush it with a brush. In addition, since the important ingredient of dish soap is a chemical synthetic agent, it is best not to use it.
To clean a cup with a lot of dirt or tea dirt, you can squeeze toothpaste on the brush, which contains both a stain remover and a very fine friction agent that can easily wipe away the residue without damaging the cup. Stainless steel thermos cup is not like other ordinary cups, it is more troublesome to clean, Nuan Yang Yang Home tells you through the following lightweight, healthy and chemical-free cleaning methods:
1. Squeeze some toothpaste and rub it back and forth on the inner wall of the cup.
2. Scrub with broken egg shells.
3. Rub with a sponge dipped in salt, which can be easily removed.
4. Potato peel to scrub, you can brush it with toothpaste.
Finally, rinse it with water, the main thing is that the safety of these cleaners can be assured, unlike ordinary detergents that are synthesized from chemicals, and the oil removal effect is very good. Do not cover the lid immediately after cleaning, and let it dry first to avoid the stainless steel thermos cup from smelling.
-
Pour more than 70 years of hot water and shake the cup repeatedly, pour out and then pour hot water again, cover the cup, pour out the water after a few minutes, if the poured water is clear, then rinse it with tap water slightly to use, whether to repeat the hot water soaking
-
1. The newly bought stainless steel thermos cup should be soaked in an appropriate amount of warm water and boiling water for 5 minutes for the first time, and then poured baking soda or rice washing water for secondary decontamination treatment, because the new thermos cup may contain a little polishing powder, and it can also be poured into white vinegar for disinfection.
2. When pouring water into the cup, avoid pouring it too full, because the lid of the thermos cup has a certain thickness, and if the water is poured too full, it will overflow when the lid is covered.
3. Before using the newly bought thermos cup, it is recommended to scald the inside and outside of the thermos cup with hot water or warm water to disinfect it at high temperature.
4. It is necessary to avoid the thermos cup being bumped or impacted, otherwise it may cause damage to the inside of the thermos cup, affect its thermal insulation performance, and reduce its service life.
-
Method steps.
Plastic cup: Before use, put a few slices of orange and lemon zest in a new cup, or pour a few drops of vinegar, then fill it with water and steep overnight. The next day, wash the cup inside and out with clean water. Soaking in rice water overnight is also fine.
Stainless steel cup: Scrub the new stainless steel cup with a soft cloth dipped in some detergent, and finally scald it with boiling water. If it is a stainless steel thermos cup, it cannot be cleaned with detergent, salt, etc., otherwise the inner liner of the thermos cup will be destroyed by detergent and salt.
You can drop one or two drops of vinegar in warm water, pour it into a cup, leave it uncovered for half an hour, and then scrub it with a soft cloth.
Ceramic cups: In order to prevent wear, some ceramic cups have a layer of wax on the surface, which can be thoroughly cleaned with detergent, then boiled twice with boiling water, and finally rinsed with water. Some ceramic cups contain lead, you can put the new cup into a pot of cold water first, then add one or two spoons of edible vinegar, boil on the heat and cook for another 20 minutes.
After boiling, the ceramic cup can not only remove lead, but also prevent cracking.
Glass: Place the newly bought glass in cold water mixed with table salt, and bring it to a boil slowly. Do not rinse the cup with cold water after taking it out, and do not fill it with cold water, wait for the cup to cool naturally before use.
The treated glass in this way can not only sterilize and disinfect, but also increase the toughness of the cup and prevent the cup from bursting during use.
-
1. Use orange peel.
Blanch the cup with hot water, then rinse it with cold water, put in four or five orange peels, and then cover it and let it sit for about four hours.
2. Use tea.
Add a little tea to the cup, then add hot water, wait about 10 minutes, and rinse well.
3. Dry after scalding with hot water.
This method is slower, and you should pay attention to dust prevention when drying.
4. Use salt water.
Mix salt and water in a cup, then shake for a while and rinse.
5. Use toothpaste.
Use a toothbrush to take an appropriate amount of toothpaste and clean the inside of the cup, but be careful to rinse the toothpaste at the end.
Precautions: 1. The cleaned thermal insulation kettle must wait for the water in the cup to drain before closing the lid to avoid breeding bacteria
2. Collision and impact should be avoided, so as not to damage the cup or plastic, resulting in insulation failure or water leakage
3. Do not rotate too hard when tightening the lid to avoid the failure of the screw buckle.
Selection method. Now there are many varieties of insulation on the market, but there is a big difference between the first and the quality, people who do not know how to buy are easy to buy low-quality goods, in fact, as long as you pay attention to the following points:
The first point is to look at the appearance. Look at the appearance of whether there are bumps or scratches, and then pay attention to whether the polishing of the inner tank is even, in the case of a light source, you can see it obliquely. In particular, whether the welding of the outlet is smooth, otherwise it will affect the feeling of drinking water;
The second point is tightness. The most important thing about the thermal insulation kettle is the thermal insulation effect, that is, the sealing, and the thermal insulation effect of a better thermos cup can last for 10 hours.
-
1. After buying the thermos cup, first look at the manual, generally there will be instructions on it, but many people don't read it, so many people can't use it correctly, and the insulation effect is not good. Open the lid of the thermos cup, and there is a plastic water bottle stopper like a cup lid, which is mainly sealing, the key to heat preservation. Rinse with some cold water and press the button to let the water run out of the cork.
This will clear some of the dust inside. 2. Some thermos cups may contain polishing powder, so after the first cleaning, you should add an appropriate amount of neutral detergent to warm water to clean it, and then rinse it with water after washing. 3. As you can see, there is a rubber ring inside the cup cap similar to a bottle stopper, which can be removed, and if there is a taste, you can go down separately and soak it in warm water for a period of time.
Remember: do not cook in a pot); There is a silicone ring that seals water inside, and it is recommended to take it out and clean it well, as there is generally a thick layer of dust on it.
-
1. Rice and baking soda: When the stainless steel thermos cup is cleaned for the first time, you can first pour the rice and baking soda into the thermos cup, which can enhance the ability to decontaminate, and then fill it with hot water and cover it, shake it vigorously for a period of time, and then open the cup to pour out the water, and then clean it with water, and the thermos cup can be used.
2. White vinegar: When the stainless steel thermos cup is cleaned for the first time, it can be cleaned with white vinegar, first pour the white vinegar into the thermos cup, then put the thermos bottle on the lid, shake it up and down for three minutes, and then pour it out, and finally clean it repeatedly with clean water, you can use the thermos cup.
3. Salt: When the stainless steel thermos cup is cleaned for the first time, it can be cleaned with salt, which can not only effectively clean the thermos cup, but also disinfect and sterilize, pour the salt into the thermos cup, cover the lid and shake the cup, and then let it stand for 20 minutes, during which the thermos cup can also be turned upside down, and it can also play a comprehensive disinfection and sterilization.
Yes, the things that cannot be put in the thermos cup are as follows: >>>More
The stainless steel thermos cup was soaked in 84 disinfectant, and it was rusted locally, and it was no longer insulated, probably because the chloride ions in the 84 disinfectant corroded the surface of the stainless steel, resulting in rust and the failure of the thermal insulation effect. >>>More
Dust and easily remove dirt soap, weak lotion or wash with warm water. >>>More
The stainless steel thermos cup can be scrubbed with some detergent with a softer cloth, and then scalded with boiling water. >>>More
Reasons why the thermos does not keep warm:
1. The inner tank itself has very small voids (holes or cracks); >>>More