Is it okay if the bathroom wall is not waterproofed, and how to remedy it

Decoration is a big science, and in the process of decoration, there are a lot of hidden projects. If we don't have supervision in place, it may bring endless troubles in the later life.

In the process of decoration, the waterproofing of the bathroom is very important, after all, in life, the bathroom is used very frequently, and there is usually water.

If the bathroom is not waterproofed, I think the best remedy is to knock out the floor tiles in the bathroom and redecorate; This is the way to do it once and for all, and other ways are difficult to live comfortably.

For me personally, if the bathroom is renovated without waterproofing, I think I will solve this problem through the following two methods.

1. Redo the decoration of the bathroom Although the bathroom is not waterproof, it is a very annoying thing, and redecoration will also cost people and money. However, in order to be able to live more comfortably in the future, and not to cause trouble to yourself due to water seepage.

That's why I would prefer to redecorate the bathroom, and then re-lay the floor tiles after the waterproofing is done.

In this process, other objects may only need to be disassembled, and they can be used normally when the bathroom is renovated and then reinstalled.

The only trouble is the cleaning of the floor tiles and the re-laying of the floor tiles, which is a tedious and meticulous work.

Second, if you don't want to be too troublesome to lay waterproof materials in the bathroom, we can also add another waterproof process to the bathroom on the existing basis.

In my personal opinion, we can use waterproof paint after leveling the bathroom, or lay waterproofing membrane as a whole.

Through such a construction method, it is also possible to do a good job of waterproofing the bathroom; However, this method may greatly reduce the waterproof effect with the extension of time.

Probably for most people, the second method will be chosen; After all, no one wants to toss again after the renovation work. Therefore, if you want to avoid this situation, you should not have any missing processes when decorating.

1. Ground leveling before waterproof treatment of the bathroom.

The ground is oriented to the slope of the floor drain, cement mortar or bean stone concrete can be used, but the surface should be flat. The slope near the door is small, and the slope near the floor drain is large, so you can grasp it according to the specific situation. The ground is uneven, and it may be uneven when applying waterproof coating, or the ground is easy to crack because of unevenness, which will crack with the ground even if the waterproof paint is applied.

2. Strengthen waterproofing at the root of the pipeline.

The pipeline passes through the root of the floor slab to strengthen the waterproofing. After the pipe root building sealing paste is sealed tightly, and the cement is smoothed and the foot pads are smoothed, the glass wire cloth reinforcement layer is 1 or 2 layers when brushing the waterproof coating. The same measures are taken near the floor drain.

3. Waterproof wall treatment in the bathroom.

The wall surface is clean and flat, without floating ash and small particles, and the original corner or slope angle is wiped at the junction of the wall and the ground. When brushing waterproof coating, paste 1 2 layers of glass wire cloth reinforcement.

Remedy for bathroom wall not waterproofing: After finding a place for water seepage, it is necessary to carry out rescue according to the situation. If there is a gap in the pipeline, the pipeline should be dismantled and replaced immediately; Water seepage at the pipe joints requires structural reinforcement; If the ground waterproofing is too low, you need to do high ground waterproofing; If you use waterproofing materials such as sealants and other architectural coatings, you will have a clear understanding of their brands.

If you have doubts about the quality, you can choose famous and well-known brand products, which is more ensured. If it is to do moisture-proof, pay attention to the details: basically whether it is leveled and tidy; Whether the moisture-proof in key areas such as ground wall connection and sewer mouth connection is done well should be repeatedly checked; Wall waterproofing project, not less than 180cm, within 24 hours after the construction of the project, to do a good job of irrigation test.

The relative height and duration of the water level of the irrigation test should be carried out in strict accordance with the specifications. Bathroom waterproofing should be implemented from beginning to end in order to prevent problems before they happen, the surface and water cloth and inventory are closely combined with the standard, in the decoration process, we must do a good job of positive moisture-proof, there must be no water seepage, to prevent the concept of water seepage. Otherwise, after moving in, it is found that there is water seepage, and then it is inconvenient to do moisture-proof, and the cost is 3-5 times that of active waterproofing.

Toilets are not moisture-proof. It is quite possible that it is still being renovated in the interior.

Before brushing latex paint, the datum should be cleaned up, there should be no dirt, and the datum should be kept dry, so as to ensure that the architectural coating is more closely bonded to the ground, and it will not fall in the middle and later stages. When painting, it is necessary to ensure that the relative height of all datum surfaces is the same, and the thickness of the brush should meet the construction requirements. After the first coat of architectural paint is thoroughly dried, the second coat of material is brushed.

In that way, the actual effect of moisture protection will be stronger.

If the protective layer is simply waterproof, it is very easy to be destroyed in the later construction process. Therefore, a protective layer is also needed on the surface of the moisture-proof layer. The protective layer should cover the ground as a whole and be waterproof, so as to ensure close bonding with the rural grassroots, so that the actual effect can be stronger.

Irrigation test, after the end of the irrigation test, must do the irrigation test, after the test will not occur water seepage problem, can be regarded as up to standard. If there is water seepage, it must be re-proofed. The toilet is an indoor space with more tap water, and if the waterproof is not done well, it is very harmful to the comfort of life, so it must be strengthened to prevent moisture before it can be started normally.

1.If the toilet is not waterproof, there will be water leakage in the process of using water. We can find the leakage point and check if there is a problem with the water pipe.

2.If the water pipes are good, it is determined that it is the problem of the waterproofing layer. If it's really a problem with the waterproofing layer, we need to fix the defective waterproofing layer.

We can use brick joint filler or repaint.

It is very important to make the wall of the bathroom waterproof, if it is not waterproofed, it is likely to cause water leakage, which will affect the use of bedrooms and other functional partitions, so it should be repaired as soon as possible.

If the wall of the bathroom is not waterproof, then you can use it like this first, and then ask a professional construction team to rectify it when there is a problem.

The bathroom will not only install a toilet, but also install a washbasin, shower, etc., will often be in close contact with water, so it is very important to do waterproofing on the bathroom wall, if you do not do waterproofing, it will lead to leakage and water seepage on the floor or wall, which makes many homeowners feel very annoyed, so what to do if the bathroom wall is not waterproof, what can be done to remedy the bathroom wall without waterproofing? Next, let's take a look at it.

1. What should I do if the bathroom wall is not waterproofed?

1. If the bathroom wall is not waterproofed, you can smash the connection between the floor drain and the drainage pipe and the floor slab.

2. Stir the mortar and alum stone expansion agent ratio, then stir evenly, apply it to the open position, and apply it evenly for 4 weeks.

3. If the bathroom is not decorated with a bathing area, it is dry and wet separation, in this case, it is no problem not to do waterproofing, and no special remedy is required.

4. If the bathroom is not waterproof, the water vapor will seep into the tile joints of the wall and the ground, resulting in the leakage problem of the floor slab, which will bring trouble to the residents downstairs, especially in the rainy area, if you do not do waterproofing, this will lead to mildew on the wall and water seepage, so the shower area must be waterproof, and there are strict requirements for the waterproof height, generally about 1.8 meters.

Second, what is the way to remedy the bathroom wall if it is not waterproofed.

1.You can make a waterproof layer on the back of the wall, which can prevent the furniture from becoming moldy, of course, if the opposite side is someone else's wall, this method will not work.

2.You can use waterproof glue to fill the gaps in the wall tiles to make up for the lack of waterproofing.

3.If the bathroom is not waterproofed, you need to install the bathtub far away from the wall when using the bathtub, and buy a waterproof shower curtain, but this method is not a long-term solution.

4.Tap the tile with your hand, if you find that there are many hollow places, it means that the tile is not pasted well, and you need to reopen the tile to make waterproofing.

5.There are not many empty positions of the tile, which shows that the quality of the tile is very good, it has a waterproof function, at this time, you can use the acetate map to infiltrate the tile, and then use sodium silicate to rub it repeatedly, so that it can make up for the water leakage of the tile to play a waterproof role.

6.Bathroom wall waterproofing must be done, do not listen to the opinions of others, bathroom shower area tiles will be in contact with water for a long time, water deep into the tiles will lead to the phenomenon of water seepage and mildew in the canopy, so users in the decoration of the bathroom, must do a good job of waterproofing the wall.

The above information is prepared for everyone about what to do if the bathroom wall is not waterproofed, what is the way to remedy the bathroom wall is not waterproof, it is over here, I believe that by reading the above information on the bathroom wall waterproofing, you have a deeper understanding, if you want to know more, please continue to pay attention to the hunting Internet café.

Many toilet water seepage and leakage are caused by seepage from the tile gap to the ground, so since the bathroom is not waterproof and the tile is pasted, then we start from the tile gap to do a good job of leakage. What should I do? If there is a water leakage problem, or it has never been waterproofed, then you have to remove the floor tiles, as well as the bottom 30 cm of the wall tiles, re-waterproof on the ground, use flexible waterproof mortar, or use membrane waterproofing, and do a closed water test for 24 hours after waterproofing.

As the flow of water increases, the water will slowly penetrate into the downstairs, causing the roof downstairs to leak, and it will also penetrate into the other side of the wall, resulting in water seepage and resurgence on the other side of our wall. For you in this case, it is more troublesome, if the developer has brushed a waterproof, it may be better, but if there is a change to the water or the ground is slotted, it will not work, and the wall must be slotted by the electrician There is a high chance of water seepage. If the wall is thin or lightweight, it is best to waterproof the entire wall.

This can only be planed, re-do waterproofing, is the most foolproof, save trouble, and downstairs neighbors awkward, there are also a lot of surface waterproofing on the market can be sold, temporary brushing can also be used, but the symptom is not a cure for the root of things, waterproof is like building a house to lay a foundation, there is no remedy to do waterproofing, need to pay attention to several special places, such as the joint between the wall and the ground, the joint between the water pipe and the ground, these areas are very prone to water leakage.

If you want to not plane tiles in the short term, there is also a way to not leak, that is, to use acrylic transparent waterproof brush several times to form a waterproof film on the surface of the tile to achieve the effect of waterproofing. Do the lower surface waterproofing or buy a separate bath room and then take 10,000 steps back to take a shower or something, as long as the tiles find the slope to find a good good water will not leak I am afraid of endless flushing or driving the washing machine all the time Others actually have little impact.

You can buy your own waterproof paint to apply, as long as the bathroom is dry, you can use the construction.

The best thing to do is to warp all the tiles off, and then re-tile them after waterproofing.

We can find a decorator and ask him to pass it on to us, so that there will be no leakage of the bathroom wall, so we still have to hurry up to deal with it.

At this time, buy a waterproof paint and apply it to the wall of the bathroom, or put a layer of waterproof wallpaper on the tiles, so that it can be remedied.