After making a waterproof wall, what kind of tile is more firm? Do you have any recommendations?

The toilet is paved with tiles, and there are two places on the wall of the toilet that need to be waterproofed. The first is that the shower area is from the ground to a minimum of eight meters, and this area needs to be waterproof; The second is the area of the basin, which needs to be waterproofed from the ground to 1.5 meters. So some friends are worried, will it be easy to fall off as a waterproof surface brick?

How can water wall tiles be stronger? Personally, I think that this problem should be controlled from the two aspects of tile veneer materials and construction methods to ensure that the tiles do not fall off.

Used for tile pavement paste, the wet method is selected, that is, the cement mortar is used to paste tiles directly on the wall pavement, and the wall tiles often fall off after the pavement pasting method, so this method has been slowly replaced, and we can not use this method to paste the tiles of the waterproof area, which will attract everyone's attention. Here it is recommended that you choose the material is a special tile adhesive to put the store tiles, and the store sticker method uses the most commonly used thin paste method to put the store tiles.

The so-called tile adhesive is to cooperate with cement and glue and other adhesive materials in a certain proportion to form a high-strength adhesive material, which has been widely used at present, and the bonded ceramic tile is very strong. When choosing a tile adhesive, you should pay attention to one point, that is, choose the corresponding adhesive to look at the moisture content of the tile. Due to the different moisture content of the tiles, different adhesives are produced.

Many friends also use adhesives, and the tiles after the store are pasted and returned, and after inspection, it is found that the adhesive he uses is not complete with the tiles.

We should also understand that the lower the moisture content of the tile, the higher the strength of the adhesive required, so for the adhesive, do not choose the wrong one before preparing to lay the tile, and be sure to complete the waterproof wall treatment of the bathroom, and the treatment measures are our common hair treatment. The correct way to deal with hair is to add glue with cement mortar, and apply hair on the wall with a spraying machine or brush, which must ensure that the hair is effectively bonded to the waterproof wall, and the bonding strength must meet the requirements. The treatment of the wall base layer is another key to preventing tile detachment and must be controlled.

After the waterproof wall is brushed, the tile will be pasted, which will make the tile more firm; The treatment method of wall brushing is to use cement plastic mortar or cement mortar to treat the wall into a high and low jagged joint layer wall, and increase the surface area of the wall after brushing, which can effectively increase the contact area between the tile and the wall, so as to effectively increase the combination of the tile and the wall.

You can choose full-body tiles, marble tiles, or tile adhesives, so as to prevent the tile from hollowing out and not easy to fall off.

You can choose porcelain tiles, or you can choose tiles with all-over marble, and then be sure to use tile adhesive when laying tiles.

You can use cement mortar, you can also use tile adhesive, according to your own needs to choose, this can be more suitable, you need to soak the tile in water, so that it will be more firm.

You can use tile adhesive, which is more convenient to use, and choose the right material according to the actual situation of your own decoration.