How to deal with the uneven stone seams in the square

1. Clean the filler between the gaps of natural marble; 2. Use the cutting and sewing machine to re-cut and open the middle seam of the original stone installation, so that the gap width difference between the stones is minimized. (Note: If the middle seam has been treated before, there is no need to re-open the seam); 3. Use a vacuum cleaner.

Clean up the dust in the crevices of the cut stone; 4. Place marble glue.

Make the perfect color matching.

to make it sufficiently close to the color of the original stone; 5. Use a shovel to evenly fill the blended marble glue in the cut gap (there will be a certain degree of shrinkage after the marble glue solidifies, so the marble glue should be slightly higher than the stone level, so as not to fill it many times); 6. When the filled marble glue is dry, the gap is polished to make it a flat horizontal plane with the stone! When grinding, a polishing disc is used for grinding, and a grinding filler is used; 7. Finally, use a granite polishing machine to grind the stone from coarse to fine, so that the ground is bright and smooth as new.

The market of high-end stone protective agents will become more specialized in all the businesses of stone maintenance, stone cleaning, stone maintenance and stone renovation have the lowest threshold, and the overlap with adjacent industries is the largest, so in the future development trend, they will gradually be marginalized by related industries and are no longer the mainstream of the stone maintenance industry. In fact, the overlap between stone disease treatment and cleaning industry is the same as that of cleaning and renovation, but because its technical nature is relatively much higher, the random variation is large, and it requires considerable experience and problem-solving ability, which is difficult for ordinary people to master. Therefore, it will remain as a professional project for stone conservation.

Modern chemical adhesives.

Although there are many types, there are not many suitable for application in the stone industry. Aopu stone protective agent is briefly classified here, and it is divided into the following categories according to the scope of application and function: unsaturated polyester resin used for structural filling and repair.

class, methacrylic acid.

Kind; silicone sealants for stone decoration and beautification, protection, caulking and sealing; used in stone reinforced unsaturated polyester and acrylic acid; unsaturated polyester resins and methacrylic acids used in the manufacture of artificial synthetic stones; Adhesives for special bonding. The application of these adhesives in the field of stone should also be said to be the expansion of chemical adhesives in the field of stone. In recent years, although experts have also tried to develop some adhesives specifically for stone, they have only been adjusted in the modification and performance indicators of some varieties, and their essence is still the extension of the expansion and application of organic chemical adhesives in the field of stone.

Use marble crystallization powder and crystallization agent to polish with stone refurbishment machine, and let the stone and crystallization powder undergo a comprehensive physical and chemical reaction under high temperature under the heavy pressure of grinding to form a dense and hard crystalline protective layer. After crystallization, it can enhance color and brightness, and can also achieve anti-slip, waterproof, oil-proof and other effects.

She will take credit for things that are not related to horses and cows. At this time, if you are more serious, reason with her, and want to get an eye on the opposing player, this is where it can be at the door.

There are seams between the marbles, which can be glued with marble glue.

Marble glue has now been recognized by the majority of stone users and the construction industryIt is suitable for bonding between various types of stone or repairing cracks and fractures on the surface of stone, and is often used for repairing, bonding positioning and caulking of various types of stone laying projects and various types of stone.

Marble gum has excellent performance, which is mainly reflected in hardness, toughness, rapid curing, polishability, weather resistance, corrosion resistance, etc. General marble glue is not very good due to its water resistance and durability. And shrinkage occurs when curing, so it is often used for rapid positioning or stone repair.

Marble is a relatively high-end home decoration material, the texture of its own surface is natural and beautiful, and it can be visually more eye-catching. And hard and wear-resistant, long service life, its surface is smooth and flat, and it is also very convenient for cleaning. The most important thing is that the marble is waterproof and moisture-proof, and will not be deformed by moisture, so it can cope with all kinds of harsh interference from the outside world, and is not afraid of wind and sun.

The precautions for laying stone on the ground are:

1. Find the datum: the horizontal datum line is on the wall, and the longitudinal and horizontal datum line pops up at the indoor center point.

2. Before laying, try to spell and try to arrange, pay attention to the pattern and color difference, and make a mark to avoid mistakes and rework.

3. The cement slurry for laying can be pure cement slurry or 1:2 cement fine mortar, sprinkled with water for maintenance after 12 hours, and cleaned the stone surface and joints after 24 hours.

4. The slurry on the back of the stone should be uniform and full, and it should be laid down horizontally to avoid dislocation caused by gravity, and then it should be patted with a rubber hammer.

5. Check the levelness and longitudinal and transverse straightness after each shop.

6. After the stone is laid, it must be waxed and maintained.

7. If there is a side, it should be paved first, and the baseboard should be paved after the floor is paved.

Can be filled with marble glue.

First of all, clean up the marble platform to be repaired, and then use a blade to expand the edge of the crack slightly, which can not only make the added marble glue more robust, but also pollute the side seam. Use marble glue to make a color close to the stone to be repaired, and fill the cracks with a scraper.

After the marble glue is dry, the marble way uses machinery and grinding pieces to polish the glue filling from coarse to fine until it is smooth and smooth. After the ground is dry, it is necessary to carry out protective treatment on the ground to avoid damage to the stone again due to moisture in the future.

After the above procedures are completed, the stone is polished with imported crystallization powder and a crystalline machine to restore its original luster. The last procedure is to do crystal surface maintenance, select the appropriate marble crystal surface agent according to different stones, and cooperate with the crystal surface machine to polish and polish the stone to increase the brightness and hardness of the stone.

Maintenance of marble floors:

1. Clean regularly.

Regular cleaning of the floor is the primary condition for maintenance, and the characteristics of marble are that many things will react with the corresponding substances when they fall on the ground, resulting in infiltration into the floor and cannot be completely cleaned, which is irreparable. In particular, some natural marble will have some gaps that can easily penetrate into the interior.

2. Repair scratches.

Repair the scratches on the marble surface in time, abrasions are very taboo for marble floors, which will affect the smoothness of the tiles. You can apply floor wax to the scratch and wipe it vigorously and repeatedly with a softer cloth, which can have a good repair effect.

3. Protect the floor.

In daily life, pay attention to avoid the fall of hard objects, although the marble floor has the characteristics of hardness, but in actual life, things in free fall have a lot of force, which is a great harm to the floor. If the hard object is too heavy, there is a high chance of causing damage to the floor.

Natural marble can only be said to have no way, even if it is repaired, there will still be seams.

If the artificial stone is fine, there will be no problem, it will be repaired, and there will be no seams after polishing.

How to deal with marble indirect joints:

1. Clean the filler between the gaps of natural marble;

2. Use the cutting and sewing machine to re-cut and open the middle seam of the original stone installation, so that the gap width difference between the stones is minimized. (Note: If the middle seam has been treated before, there is no need to re-open the seam);

3. Use a vacuum cleaner to clean up the dust in the cracks of the cut stone;

4. The marble glue is perfectly toned to make it fully close to the color of the original stone;

5. Use a shovel to evenly fill the blended marble glue in the cut gap (there will be a certain degree of shrinkage after the marble glue solidifies, so the marble glue should be slightly higher than the stone level, so as not to fill it many times);

6. When the filled marble glue is dry, the gap is polished to make it a flat horizontal plane with the stone! When grinding, a polishing disc is used for grinding, and a grinding filler is used;

7. Finally, use a granite polishing machine to grind the stone from coarse to fine, so that the ground is bright and smooth as new.

I want to know what kind of marble yours is, some things can be fixed, some things can't, and there will always be excuses unless you use a piece.

There are generally gaps between marbles, so how to deal with marble joints, 1. Clean up the original filler between the stone gaps, and then use a special stone cracker to re-cut the middle seams installed on the original stone, so that the width difference between the stones is reduced to a minimum, and then fill it with marble glue close to the color of the stone.

2. Fill the adjusted marble glue, because there will be a certain degree of shrinkage after the marble glue is completely solidified, so the marble glue should be slightly higher than the stone level, so that it will not be filled many times.

3. Use grinding and polishing sheets and grinding fillers to make it a horizontal plane with the stone, increase the overall sense of the stone, and solve the problem of high and low position between the gaps, so as to prevent the gaps from returning to black again. The granite refurbishment machine is used with a special cutting grinding disc to carefully polish the cutting position to make it a flat whole with the stone.

In fact, it is very easy to deal with the joints of marble countertops, and other methods can be adopted. However, the above method is relatively simple and less cumbersome. Generally, you can handle it yourself, or ask the decoration master to handle it, and you can deal with it when you have nothing to do, and you can't see anything.

Seamless splicing must use stone seamless splicing glue. Ordinary bonding can be done with AB glue and marble glue.

You can go to the store where you buy marble to order stone glue, and you can't see it after filling it, especially for depressions.

Normal. Reasons: (1) The floating ash on the reverse side of the plate is not brushed and wetted with water, which affects the cleaning of the sticky base layer is not clean or the watering and wetting is not enough, and the cement slurry joint layer is unevenly brushed or the brushing time is too long, so that the air is dry and hard, resulting in the surface layer and the cushion layer are hollowed together.

2) The cushion mortar should be dry and hard mortar, such as adding water a lot or spreading too thick at one time, and it is not compact, which simply causes the surface layer to collapse hollow drum. Brother Cha.

3) Results, poor operation quality, improper hammering.

There are two types of marble repairs:

1. Fracture: Coat a layer of marble glue on the broken stubble, then splice it and fix it, generally after 1 to 2 hours, it will be firmly bonded, and finally the stubble will be polished and polished.

2. Collapsed edges, missing corners and pits: In the marble glue or marble glue, add stone powder close to the stone, add color fine and adjust it into a paste consistent with the color of the stone, and then wipe the adjusted glue on the stone chipping, missing corners and pits, and grind and polish after the paste is dry.