How to raise flowers in sawdust, and how to make sawdust as flower soil?

It is not advisable to raise flowers with sawdust, especially just processed, because there are many kinds of aromatic substances in it, which have a strong bactericidal effect, which is very unfavorable for the root growth of flowers, and the use of sawdust to raise flowers, we must pay attention to the following matters, first, according to the end of the flowers, we must use the way of fermentation, treat the medium, you can add water, so that the sawdust crumbs are wet, you can, you can, add a pound of lime per 100 catties of sawdust crumbs, it is its water content of about 60%, and carry out half a month of fermentation, After such treatment, the medium made has a moderate water content and strong water retention capacity, which is very beneficial to the root development and growth of flowers.

Decomposed and sterilized, mixed nutrient soil is available.

You can use sawdust to raise the seeds of the orchid, but after germination, you need to move it to the soil.

Use "sawn" to raise orchids, and grow roots faster.

As we all know, raising a few pots of beautiful flowers and plants at home will look different, not only bringing a small fresh feeling to the home, but also making the environment more beautiful. But if you want the potted plants at home to grow better, grow luxuriantly, and continue to bloom, fertilizer is very critical, some people use rice water to make fertilizer, some use waste oil in the range hood to make fertilizer, some use peanut shells, fish offal and so on to make fertilizer, of course, there is a common thing, that is, sawdust, can also be used as fertilizer. How to use sawdust as fertilizer for raising flowers?

1. Use base fertilizer.

Sawdust as base fertilizer must first go through decay and fermentation before it can be used to raise flowers. The method is to put the sawdust into a plastic bag and add a small amount of garden soil, then grab a handful of urea into it, pour water and mix it with wet, tie the plastic bag tightly, and place it for about 3 months to make base fertilizer and raise flowers. The fermented and rotten sawdust is loose and fertile, and the nutrients are comprehensive, which is very conducive to the growth of plants and flowers, and can make the plants grow and flourish.

2. Use nutrient soil.

The fermented sawdust is soft, fertile, absorbent, and has good air permeability, and can be mixed with garden soil or sandy soil to plant flowers, and the plant roots can quickly resume normal growth in such soil, and it is not easy to form the phenomenon of soil slabs. It is suitable for cultivating many plants and flowers, such as Monarch Orchid, Wenzhu, Fortune Dangtou, Cyclamen Succulents and so on.

3. Use as a cuttings substrate.

The use of sawdust for cuttings propagation has two advantages, one is that sawdust has good moisture retention and is not easy to dry and lack water; Then there is fast rooting, with sawdust cuttings in the case of suitable temperature, generally about 20 days can take root. Cutting method: use sawdust as the substrate for cuttings, the cuttings should be slightly longer, generally cut about 15-20 cm, mix the sawdust wet into a slender plastic bag, and then insert the cuttings, place them in a dark and ventilated place for maintenance, and soon be able to grow new roots.

It is very suitable for cuttings of plants and flowers such as moonflowers and gardenias.

Well, the above are several ways to raise flowers with sawdust, is it very simple, friends who raise flowers can collect some, and it is really good to raise flowers!

Sawdust can do 1Base fertilizer, first rot it through fermentation, then put some sawdust, add a small amount of raw soil in a plastic bag, add some urea and water, tie the plastic bag tightly, and place it for about three months to make base fertilizer, 2It can also be used as nutrient soil, which is also mixed with garden soil after fermentation, or sandy soil for planting flowers, 3

You can make a cutting substrate, add water directly at the end of the sentence and put it in a plastic bag, and put the cuttings plants in.

Sawdust is best fermented before use. You can use a plastic bag to pack sawdust, then add water, or you can buy some starter culture to speed up the fermentation, put it in a warm place, and you can use it after ten days.

1. Sawdust can be added to the soil of the cultivated plants to improve the structure of the potting soil and make the soil evacuated and breathable.

2. Sawdust is used as a cutting medium, sawdust has good water retention and can be used to cut plants, such as cuttings, gardenias, etc.

1. Make nutrient soil: put the sawdust in a plastic bag, add a small amount of water, mix it wet, and seal it for fermentation. 2. Make base fertilizer:

Mix sawdust with a small amount of garden soil and urea, mix with water, and then seal and ferment. 3. Make cuttings matrix: mix the sawdust wet and put it into a plastic bag.

4. Advantages and characteristics: the culture soil made of sawdust is permeable.

1. Make nutrient soil

If sawdust is directly put into the flower pot, fermentation in the flower pot will cause flower root burns in the later stage, so the sawdust needs to be placed in a plastic bag with an appropriate amount of water, stirred and sealed after moisture, placed in direct sunlight and high temperature environment, let it ferment naturally, and the sawdust will rot into black brown in about 3 months, which can be used to cultivate flowers.

2. Make base fertilizer:

Put the sawdust into a plastic bag and add a small amount of garden soil, then add an appropriate amount of urea, add water and stir evenly, tie the plastic bag tightly, seal and place it for about 3 months, the sawdust can be used as base fertilizer when it is completely decomposed, and the fermented sawdust is loose and fertile, with sufficient nutrients, which is very suitable for flower growth.

3. Make cuttings matrix

Cuttings can be used as a substrate when propagating, sawdust has good moisture retention, is not easy to dry and lack water, is conducive to plant rooting, generally uses sawdust to make cuttings substrate can take root in about 20 days, when making sawdust, put sawdust into a plastic bag and add water to mix wet, tie the bag mouth tightly, and put the cuttings in a dark and ventilated place after maintenance.

4. Advantages and characteristics

The culture soil made of sawdust has permeability, which is conducive to the drainage and ventilation of the potting soil, promotes the absorption of water and nutrients by the roots, and can also play a role in heat preservation, volatilize excess water, and reduce the problems of leaf yellowing and root rot caused by excessive watering of flower roots.

1. Sawdust as a culture medium:

Sawdust can be used when growing plants, and adding a small amount of sawdust to the soil where the plants are cultivated can not only improve the structure of the soil, but also make the potting soil more loose and breathable.

At the same time, since sawdust is added to the soil without fermentation, sawdust in the pot only produces a small amount of heat and has little effect on the root system.

2. Sawdust as cutting medium:

Because sawdust has strong water retention, it is very suitable for cuttings, such as cuttings, gardenias, etc.

There are many advantages of using sawdust to cut plants, the plant not only takes root quickly, but also grows strong branches and leaves, and when transplanting, the plant and sawdust can be planted in a pot, which greatly reduces the damage to the root system of the plant.

3. Sawdust is known to be used as fertilizer:

If you want to use sawdust as fertilizer, you need to treat the sawdust a little. Because only rotted sawdust can be used with fertilizer.

Put the sawdust in a bucket or bag, pour a little water into it, and then place it in the tuyere, wait for a month or two before it is ready to use.

Completely rotted sawdust contains the nutrients needed for plant growth, which is not only nutritious for plants, but also loose and breathable.

4. Note: Although sawdust can be used to raise flowers, it is not recommended to use sawdust often, because sawdust itself is not rich in nutrients, and it is too loose, so it is best to use it with nutrient soil.

70% sawdust is mixed with human manure or 30% poultry manure, packed in plastic bags or wooden boxes, poured with an appropriate amount of rice washing water or vegetable washing water every day, and can be used to cultivate flowers and trees after being fully decomposed.

If some honeycomb coal ash is added during use, it can be celebrated to improve the soil structure. The sawdust-based medium is loose, breathable, and will not be compacted, which is very conducive to the rooting of flowers and trees, long stems, and does not hurt the roots when transplanting. It has good permeability and strong water storage capacity, and can be kept dry for several days at a time.

Moreover, it is light in weight, especially suitable for roof garden greening and flower balconies in the city. The material selection is wide, the cost is low, and the effect is good, especially suitable for Zhongyu silver, small flowers and bulbous flowers. The survival rate of planting camellia and cuttings is high;

Sawdust can be used as flower soil, but there is also a particular, there is no objection to whether sawdust can be used as flower soil, everyone thinks that it can, if it is mixed with a relatively small proportion, it can improve the soil structure, will not cause much damage to plants, and sawdust rots slowly, so it will not easily produce heat because of watering to damage plant roots.

But the difference is whether it is rotten, after the investigation and summary of the flower friends in the group, it was found that as long as it is used properly, it is not rotten.

Sawdust refers to foam-like wood chips that are scattered from trees due to cutting during wood processing. Wood processing is the processing of wood as raw material, mainly by mechanical or chemical methods, and its products still maintain the basic characteristics of wood.

In the forest industry, the wood processing industry and the chemical processing of forest products are both the follow-up industries of forest harvesting and transportation, and are important sectors for the comprehensive utilization of wood resources.

China is a country with underdeveloped forestry resources, in fact, sawdust can be used to develop many products that are beneficial to people's production and life, now, many people have realized this, the use of sawdust has been developed, high-quality sawdust is basically from Zhejiang, such as the sawdust of Zhejiang Tonglu Qiurong wood industry has been widely praised.

Sawdust is not only a good substrate for propagation by family flower cuttings, but also a good medium for cultivating flowers and trees, especially fat and thick fleshy root flowers. Sawdust is generally neutral or slightly acidic, but due to the large variety of wood, the pH of sawdust is also different. To cultivate different types of flowers and trees, pay attention to the use of sawdust from different woods.

For example, the cultivation of Junzi Orchid, Hewang Orchid, Monstera, Rubber Tree, Su Ji Xi Iron and potted Muzi Lead Limb Dan can be used for neutral hard wood sawdust; White orchids, smiling, Milan, gardenias, pearl orchids, camellias, etc. should be made with pine sawdust. Fresh sawdust is usually used in a clay pot or clay box. The above-mentioned flowers and trees are cultivated with sawdust, and the growth is robust and the flowers are luxuriant.