Plastic wardrobe installation steps, how to install the wardrobe installation steps

1. First of all, the first step is to place the closet door panel in the category and prepare a sufficient number of snaps. It is also the most important step to make an inventory of the materials needed to prevent the installation to be insufficient later.

2. To install the wardrobe bottom plate, insert the rectangular bottom plate into the buckle to make the door panel smooth and upward. Place rectangular polygons in place so as not to affect the integrity of the wardrobe.

3. Install the back and side panels of the wardrobe, make sure the smooth side of the door panel is facing outward, and then install the clasp. Connect each buckle in order, and be sure to do it in the corresponding order at this time.

4. Install the top plate, and then the corner horizontally of each side of the top plate is snapped into the corresponding triangular fixture slot. Be careful not to break your hand, that's the most important thing.

5. Install the door panel, connect the door axis of the door panel to the semicircular buckle of the buckle, and then insert the bottom edge of the door panel into the base buckle. At this time, we must pay attention to the installation strength of the buckle, and try to install it to the end to avoid the occurrence of unstable phenomena.

6. Hit it with a mallet to make sure all parts are locked in place, install the other two door panels in turn, and then install the second and third layers according to the above method. Assemble a simple wardrobe, and the above is how to install a plastic wardrobe.

One. Equipment Installation:

Some of the steel pipes of the cloth wardrobe are marked with numbers, and they can be put together with the number, the second step, the process. 1. Find out the parts of the underframe, put them together, and note that only the bottom part is the part. Some of them have shoe racks, so you need to put the shoe rack part in place first.

1.The bottom of the plate sits.

Screw-dry installation. 2.Classify plates. Such as:

Roof. Motherboard.

Side plates. Neutral plates.

shelves, etc. 3.Position of the classification panels. Such as: the top plate is on top.

The side plate is one left and one right, and the bottom plate is in the lower class. Two. Installation:

1.When installing, the cabinet is facing downwards and starts installation from left to right or right to left.

2.After the plate assembly is completed, please ensure that the diagonal error of the cabinet is within plus or minus 1mm.

3.After the diagonal measurement is completed, please mark the position of the shelf or vertical plate of the back plate to be nailed on the two sides of the plate (side plate) to facilitate the nailing of the back plate.

4.After the cabinet is placed in place, please use a level ruler to measure whether the cabinet is horizontal, if not, please adjust it to a horizontal position. A common way to do this is to put something under the cabinet.

5.After the cabinet is level, it can be installed in turn: clothes rail, drawer. Door panels or sliding doors. After the retractable garment mirror, the handle is installed according to the customer's requirements.

2. Note that the second step is not to put the rest of the shelves on the shelf, but to put on the cloth first. Open the zipper of the cloth and pull open the place where the middle is glued, with the bottom facing down. There are some small holes dug in the bottom of the cloth, and the cloth is pulled down from top to bottom along each vertical pipe according to each hole.

You can skip pulling to the bottom for now.

3. Put the rest of the tube on the inside of the cloth, then pull the cloth up, cover the top of the tube, and adjust it until the cloth looks flat and not wrinkled.

4. The installation is complete.

Note: Some are plastic interfaces, sometimes a little tight, you must not use force to plug in, accidentally cracked, there is no place to buy accessories. Don't tighten one on the screw interface, that will bring difficulties to the future installation, first loosely put the shelves on well, and then use a screwdriver to tighten all the screws after they are installed.

This way you will get a sturdy cloth wardrobe!

Generally speaking, plastic wardrobes have an installation drawing, and you can operate directly according to the drawings. If you still don't understand, you can contact the merchant to negotiate how to install it or ask them if they have installed it** and so on.

Anyway, if you buy it online, there should be a manual, you just follow that, and you must pay attention to safety.

<> simple plastic wardrobe should be assembled in accordance with the steps of classified placement, bottom panel, top panel, door panel, and mallet beating. The first is classified placement. Sort and place various materials in the wardrobe, such as base plates, buckles, etc., so that you can check the number of materials to see if there is anything missing.

The second is to install the bottom plate. Insert the rectangular base plate of the wardrobe directly into the buckle, then let the smooth side of the base plate face up, and then place the fully installed rectangle in the appropriate position, and the return posture can ensure the integrity of the wardrobe. The third is to install the top plate.

Insert the corners of the top plate in all directions directly into the triangular clamp, and then attach the buckles in order after installing the buckles. The fourth is to install the door sleepy bird panel. Find the base buckle and insert the door panel along the bottom edge, and be sure to install it to the end to ensure its firmness.

Fifth, the mallet is beaten, and the position of each buckle and buckle is hammered to ensure the firmness of the wardrobe.

1. Preparation stage 1, the material arrival is more formal furniture manufacturers, and the board is generally packaged in cardboard when it is transported to the site. After unpacking, check the plates and hardware. 2. The fixing screws are generally left with nail holes according to the design drawing, and the workers on the site fix the screws with special tools.

3. Since the wardrobe is placed against the wall, a piece of the side panel should be sawed off at the position of the baseboard. Place it to see if it fits. Second, the installation stage 1, the floor where the bottom plate of the wardrobe is placed should be cleaned in advance, because it will be very troublesome to clean it after installation.

2. Install the side panels and back panels of the wardrobe according to the grooves on the plates, and adjust the positions between the boards. 3. It is best to prepare a stool for climbing on the installation site, and the roof should be raised and placed, and then fixed with rivets. 4. Install the shelfPut the shelf in the place where the screws have been knocked in advance, and then fix it.

Pay attention to adjusting the fixed position of the shelf, back and side panels. 5. The fixed door rail is installed on the top and bottom edge of the wardrobe, and the alloy material of the door rail is better, light and firm. 6. Install the clothes rod and fix the rivets in the reserved position and install the clothes rod.

Pay attention to balance on both sides. Third, the finishing stage 1, the installation of the door leaf two sliding doors to be attached to the position of the guide rail installation, first fix the door leaf and then fix the bottom of the guide rail, so as to avoid the phenomenon of the door leaf falling off in the future. 2. After all the adjustments and improvements are installed, do a "comprehensive inspection" of the wardrobe, and adjust it in time if there is a deviation.

3. Complete the acceptance and finally do the acceptance of the wardrobe: shake the cabinet to see if it is firm and whether the details are in place.