How to log in to the background of the wireless router through the WAN port?

To plug in the LAN port, the single port should be connected to the wireless.

Step Method First of all, if there is a wireless router, then turn on the power first, and then plug in the network cable, plug in the WAN port (usually the blue port), and then connect with the computer network cable to plug in any LAN port, after doing these jobs, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if you are using ** online network, then you have to prepare an additional modem, commonly known as "cat").

Then enter, enter the corresponding account and password, generally the new ones are admin

After entering the operation screen, you will see a setup wizard on the left, Attack on the entry (usually it pops up automatically).

Enter the setup wizard interface.

Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

If you choose PPPoE dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

The next step is to set it up successfully.

Click Done, and the router will automatically restart, so be patient. The interface that appears after success.

You can press enter the press enter key in your computer's browser.

Then enter the corresponding router password in the login circle group face that appears, and you can log in to enter the rear brigade platform. Here's how to log in:

1. Enter in the computer browser and press the Enter key.

2. After the page jumps, enter the login interface of the router, enter the password in the input box and click the login button. (If you have not changed the login password of the Luzhen Orange router, you can log in by checking the default password on the back of the router).

3. After the page jumps, you can see that you have logged in to the background of the router.

4. At this time, you can click the corresponding function under the router to make relevant settings.

Entering the background management of the router is actually the same as setting up the router.

1. The broadband network cable or the network cable out of the cat is connected to the WAN port of the router, and the LAN port is connected to the computer.

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Enter the router IP and then enter the administrator password to enter. The router address is usually found on the back of the router.

Don't panic if you forget the router address, the technology will teach you a trick and easily enter the management background.

When we need to set up a router but forget the management address of the router, how can we quickly check the management address?

Plug the network cable into the router WAN port, plug the computer network cable into the LAN port, the computer IP will be automatically obtained, press the router reset button for more than 10 seconds to restore the factory settings, and then enter the IE address bar or, enter the account admin on the open interface, secret admin

You used to use a cat to surf the Internet, and now the router does it bring a cat? If you don't bring it, then you can't get on, you can connect the cat in front of the router and use the cat or the router to dial and try.

2.Then enter the IP address you see into the address bar of your browser, and then enter the password, and you can enter the settings.

Method 2: 1Right-click the network icon in the lower-right corner of the notebook and select Open Network and Sharing Center.

2.Entering the Network and Sharing Center, we select "Change adapter settings".

3.Find the wireless network we are thinking about, and then we double-click on our wireless network icon.

4.Open the "Wi-Fi Status" history, and then we select "Details".

5.In the Details you can see "IPv4.""and IPv4 Default Gateway. Generally the "IPv4 Default Gateway" is the IP address of the router settings page.

6.Then we enter the "IPv4 Default Gateway" address directly into the browser, and it will pop up a router settings interface, let us enter the password to set the router administrator.

7.Enter the password, and you will be taken to the router's settings page.