What is the seamless method for changing a sweater from fat to thin?

If the sweater is fat and thin, you need to remove the waist, neck and two sleeves all the stitches and re-beat, this method is very time-consuming and energy-consuming, it is better to re-tie a new sweater.

1. If two pieces of splicing are needed, it will be better to sew out the first knit. And back and forth are knitting needles, a single piece is a small bead beads, this is the popular saying in the knitting line - bead bead needle. Knitted with beaded needles, whether it is a collar or a sewn sleeve, it will not leave a large hole.

2. Knit the needle back and forth on the edge, and sew it on the front side one-to-one. This method is convenient, and after sewing, the reverse side is a row of braids.

3. When the sleeves and neckline are in arcs, it is better to pick off the first stitch without weaving. The method of picking the needle: the original upper needle is picked with the lower needle, and the original needle is picked with the upper needle.

4. Treatment of the edge of the placket: The edge of the cardigan should be woven into both sides to look good. That is, the first needle of each line is not knitted, add a needle empty needle, continue to weave, and when you come back, add the needle and the last needle to form a needle.

How to calculate the size of a sweater:

Wool is generally sized according to the number of needles, and can be roughly divided into three types according to the degree of thickness

One is the high and thick line: the width of the weaving is about 3 3 cm (1 inch) with 7 8 needles, and the length is about 3 3 cm with 8 10 needles.

The second is the medium and thick line, which is 3 3 cm wide with 9 needles and 3 3 cm long with 10 11 needles.

The third is a thin line, with a width of 11 needles for 3 3 cm and a length of 12 14 needles for 3 3 cm. When weaving patterns with these three threads, there is usually an error of 1 or 2 stitches, so it is necessary to add or subtract stitches appropriately according to the density of the pattern.

There is a more intuitive and accurate calculation method, which is the test method: use the selected needle and thread to start 20 stitches, knit 3 3 cm according to the pattern you need, measure the specific size with a ruler, and then use this as a standard to calculate the size of the sweater.

The specific method is to divide the human body into three types: tall, medium and short

Tall (over 1 75 m) men's pullover with a width of about 97 cm (2 9 feet) and a length of about 77 cm (2 3 feet);

High (1 70 meters or more) women's set.

Zu, with a width of 90 cm (2 7 feet) and a length of 70 cm (2 1 feet);

Middle 1 65 1 75 m) male set ancestor, 90 cm (2 7 ft) in length, 70 cm (2 1 ft);

Medium (1 60 1 70 m) female pullover, 80 cm (2 4 ft) with a length of 63 cm (1 9 ft), short (under 1 65 m) male pullover, 83 cm (2 5 ft) wide, 65 cm (1 95 ft) long;

Short (under 1 60 m) pullover with a width of 73 cm (2 2 feet) and a length of 60 cm (1 8 feet).

The width of the cardigan is about 7 cm (2 inches) of the body width of the pullover, and the length of the sweater should be about 3 3 cm (1 inch), and the width of the snow jacket and jacket is the width of the pullover plus about 13 3 cm (4 inches), and the length can be woven into short, medium and long styles according to personal preferences.

Want to change your sweater to be fat? No need to cut or sew, 2 minutes to create a fashionable model, and you can also adjust it!

Sweater is one of the more common clothes in daily life, many people in the autumn and winter will choose to go to the store to buy sweaters back to wear, and now there are more styles and types of sweaters sold on the market, but there are also some people who encounter some problems when dressing, so, how to expand the sweater if it is too thin? Let's take a look at it with the questions.

First of all, the first method is that people can prepare a plate of warm water of about 35 degrees, and then add about 100 ml of white vinegar to the warm water, it is best to wear disposable gloves in your hands, gently stir the white vinegar with water, and then put the sweater into the water, to ensure that the sweater is fully soaked in it, about 30 minutes or soak, and then gently stretch the sweater with your hands, and wait until the whole sweater is stretched again, and then pour out the water, this time in the basin to put an appropriate amount of water, After washing, pick it up and press the water with a towel, then hang it to dry.

There is also a way to put the washed sweater in the steamer and steam it for about 15 minutes, and then take it out and pull it to the original size by hand, and put it on the table to dry naturally, which saves money and will not hurt the sweater.

Finally, it is recommended that people should ask the customer service of a regular store when they want to expand their sweater to avoid damaging the clothes due to their own incorrect means.

1. If it is a finished sweater bought, disassemble the sweater into pieces, cut off the excess parts according to the size, make the pieces narrow, and then sew them well.

2. If it is a sweater knitted by yourself, it is best; Remove all the sweaters and make them look good. If you have just bought it, it is recommended to change the appropriate number.

3. Soak the sweater in clean water first, then scoop it up from the water, hang it on a drying rack and hang it in a cool and ventilated place to dry. Enlightened like a chain.

4. This method mainly uses the self-gravity of the sweater after soaking in water to stretch the sweater downward, so as to make the transverse smaller, so that the sweater becomes thinner.

5. The shrinkage sweater fibers are heated with a steam iron, and then the fibers can be stretched with both hands while they are hot. According to experience, due to the limited heating area of the steam iron, in order to ensure that the fiber is stretched evenly, the sweater is made by partial, segmented, partial, and heated stretching. Before stretching, you should have a good idea of the total length of the stretch, so as to do quietly to the stretching length of each section, and measure the total length with a ruler after all the rubber changes are drawn, if the length is not enough, it can be repeated.

6. Pay special attention to the size and do not overdo it, and make appropriate adjustments at the end. There is a way to enlarge the shrinkage of a thick cardboard sweater after washing, and the specific method is: cut it into the size and shape of the original sweater with thick cardboard (cardboard of household appliance packaging boxes), and the cut is best polished with sandpaper to avoid hooking the sweater.

Put the sweater on the cardboard, fix it with a few more clothespins at the lower feet, and then steam iron the sweater repeatedly with an electric iron on all parts of the sweater, and remove it after it has cooled completely.

Sweater slimmed down and loosened ways :

1. Wet the clothes with water, pull them to the required loose size, fix the mold belt with high-temperature resistant materials, bake them in the oven for about two minutes, and take them out to cool.

2. After the clothes are stretched and fixed, the iron is adjusted to the first gear - spray ironing; Then turn off the spray, the temperature drops to "cotton" before dry ironing, and finally drying.

3. Wet the clothes, find a three-plywood two centimeters larger than the clothes to support in the wet clothes, and then iron with an iron to support the clothes.

Depending on the material of the clothes, cotton and elastic clothes can be loosened by washing them several times. In addition, the tightness of the clothes is also related to the texture of the clothes. Generally speaking, if the elastic and threaded clothes are built on the reed branch stool, it is easy to become loose after washing it several times.

However, if it is a jacket made of fabric, it is generally difficult to loosen it.

1.with a steamer.

Sweater shrinkage and smaller? Do not worry! You can make the steamer come in handy, find a cotton pocket (cotton pillowcase can also be used), put in a shrunken folded shrunken sweater (recommended after cleaning), put it in the steamer, steam for 20 minutes, stretch the sweater to the size you want, spontaneously combust and air dry, and it will be magically restored!

Moreover, the sweater is fluffy and fluffy.

2.Thick cardboard.

There are many types of sweaters, and cardigans are one that is commonly worn. Since cardigans are more valuable, saving shrunken or skinny cardigans must be taken seriously. Use the thick cardboard of the carton to cut it into your ideal size or shape, and then, put the cardboard on the cardboard, fix it with clips, and then iron it with an electric iron, and the shrinkage problem will be solved!

3.Shampoo.

Shampoo that washes your hair regularly can also save shrinking sweaters, but I didn't expect it! Pour shampoo into lukewarm water and stir with your hands until lather (the more foam, the better).

Then put in the shrunken sweater, soak for about 30 minutes, no need to wring out the water, use a bath towel or towel to absorb the excess water, and then stretch it to your ideal size, after drying, the sweater will recover!

4.Hair conditioner.

In addition to shampoo can solve the problem of sweater shrinkage, conditioner is also a good helper.

Add conditioner to the water, soak it in the same way for about 10 minutes, stretch it while washing, wring out the water, use an electric iron to stretch it while ironing, and after spontaneous combustion and air drying, the sweater can gradually increase in size by 1 size.

5.Ammonian water.

Ammonia water is ammonia, which is sold in chemical stores for industrial use, or is also a diluted ammonia for toilet cleaners. Add it to warm water, soak the shrunken sweater, pull it while washing, and after it is semi-dry, it will be ironed with an iron to return to its original shape.

Separate the sides and add another one, or soak the sweater with enzymes and water, and let it dry to return to looseness.

How to modify the sweater by hand if it is fat and big:

1. The first type.

1) Find the side seam of the sweater, needle from the inside of the sweater, and then sew, the middle point is into the side seam;

2) After sewing a vertical row of inverted figures, determine the appropriate length, the last stitch into the inside of the sweater, and then pull the thread tightly, and finally tie the knot, you can get a beautiful pattern, and you can also say that the sweater becomes thinner.

2. The second type.

1) Flip the sweater over, and then sew from the bottom of the sweater to the cuffs, each stitch is connected to the previous stitch, so that the stitches will be finer, and it is not easy to loosen.

If you knit your own sweater, you can only remove the sweater and re-measure the knit. If you have just bought it and the tag has not been removed, it is recommended to change the appropriate yardage.

Some sweaters are hypertrophied because the sweater itself is loose, so it may look fat when worn on the body, and some netizens who like slim fits feel very uncomfortable.

Of course, there are also some netizens who specialize in looking for fat sweaters. This is still a matter of personal preference. Sweaters are generally woven from wool, so it is generally a little difficult to start when modifying sweaters, if you really don't know how to modify them, it is recommended to send them to a special store to modify.