What paint is good for bamboo? Bamboo brushed tung oil or varnish

Tung oil, if you can brush it with pure natural tung oil oil and then brighten it with that hard glaze surface, it will be very clean.

Extended Material: Think about bamboo.

The paint will not fade and will be treated by a special process. Bamboo process treatment paint steps:

1. Hot oil coloring: put the dry bamboo into 200 hot oil, and the bamboo after taking it out is a glossy purple red, and the processing performance is good, which can be used as a handicraft material or a design blank for bamboo products.

2. Pressurized heating and coloring of non-flammable gas: first, put the bamboo into the pressure vessel, extract the air in the container, and inject argon, helium and other inert gases.

After making sulfur dioxide.

nitrogen, and carbon dioxide.

Any one of the non-combustible gases, or more than 2 kinds of mixed non-combustible gases, so that these gases account for more than 90 in the pressure vessel. Then, the container is heated to 100 150 and the pressure applied at the same time is maintained for more than 30 minutes to make bamboo with purple red inside and outside and shiny surface.

3. Carbonization and coloring: the bamboo is soaked in polyhexyl alcohol (molecular weight 1500) solution and heated, the bamboo is brown-red, so that the bamboo is minimized by the influence of unfavorable factors such as oxidation or cracking, and the bamboo is uniformly colored from the surface to the core, maintaining good processing performance and providing convenience for making handicrafts with higher value. The heating temperature of carbonization coloring is taken 60 200, and the heating time should be based on the degree of carbonization and coloring required, the purpose of use of bamboo, the immersion of bamboo in the treatment tank, etc., and make appropriate increases and decreases, this treatment part affects the mechanical processing performance of bamboo, non-toxic, and can maintain a long-term treatment effect.

4. Acid treatment and coloring: The use of strong acid to chemically treat bamboo products can make bamboo products appear bronze.

This treatment falls under the category of chemical staining. The products made of bamboo strips and bamboo grains after this coloring treatment are antique and rich in national flavor. Specific operation: take 100kg of water, sulfuric acid or nitric acid.

1kg, prepare a solution in an acid-resistant container, immerse bamboo products such as bamboo strips or bamboo grains in the solution, pick them up after 10 15min, and then put them in saturated lime water.

Treatment in the solution for 30 40min, rinse with water after removal, and dry before use. The color of the product can be controlled by adjusting the concentration of the calculation and the soaking time of the bamboo product.

If you want the bamboo paint to not fade, it must be treated with a special process. Bamboo process processing paint steps: 1) hot oil coloring: put the dried bamboo into 200 hot oil and take.

Healthy and environmentally friendly, some use tung oil or dama resin, and the surface wear resistance and hardness are high with alkyd or acrylic varnish.

What kind of paint is good for bamboo? I think we should use that kind of transparent paint, that is, it is very bright after oil, and you should be able to see the texture of the bamboo, so that the bamboo that comes out is particularly good, and the yellowing and white are the primary colors, which are very good-looking. In the past, that kind of tung oil was also possible.

If you use something else, he won't be able to produce his original color after that, so it's not good-looking.

It's best to find a professional painter to get it. If you want to do it yourself, first polish the surface of the bamboo directly with water sand, wipe it clean and apply a layer of clear primer (general one), after the clear primer is dry, and then polish it with water sand, you can rest assured that the white and blue paint can be used.

It is recommended to brush the bamboo with varnish, because the wood wax oil will damage the texture of the bamboo itself.

Varnish, also known as Fan Lishui, is a coating composed of resin as the main film-forming substance plus solvent, because the coating and coating film of the varnish are transparent, so it is also called transparent paint. The varnish is applied to the surface of the object, and after drying, it forms a smooth film, which can better reveal the original texture of the surface.

Bamboo flooring is mildew-proof, moth-proof, flame-retardant, anti-static, non-plastic and easy to install, and is recognized as a decorative material in the new century. The bamboo has a beautiful texture, elegant color, soft and warm, fragrant smell, can absorb ultraviolet rays, and is beneficial to people's vision.

The color difference of bamboo flooring is small, and it is divided into two types: natural color and artificial paint. The colored wooden floor has a uniform color of bamboo grain, bright and bright, and the bamboo grain of the artificially lacquered bamboo floor is not too obvious. Most of the surface treatment of bamboo flooring is clearcoat, bright paint, matte paint, etc., which can maintain the bamboo grain of the bamboo floor as much as possible.

Bamboo flooring has good stability. It adopts different water content control according to the local climate, so its cracking deformation rate is much smaller than that of solid wood flooring. In addition, the bamboo fiber of the bamboo floor is arranged in the form of hollow bricks, and the tensile and compressive strength have been greatly strengthened.

Hello dear! Tung oil can be used for bamboo. Tung oil is different from clear oil, it will seep into the bamboo, so the bamboo row is not afraid of water soaking.

However, compared with other paints, tung oil is more expensive, the smell is durable, and the construction is troublesome, usually every 2-3 years need to be repainted. Hope it helps!

The biggest advantage of varnish is that it does not contain volatile toxic substances, as long as the varnish dries, it can be used immediately, without waiting for the smell to dissipate. Oh kiss The varnish has high transparency, after the varnish is applied in the wooden furniture, you can clearly see the texture of the wood, which greatly increases the ornamental degree Oh kiss: 1. The quality of the varnish should be good, otherwise the varnish will be yellowed and affect the natural color of the bamboo; 2. When applying varnish, the bamboo should be treated, and the paint should be thin, otherwise it will warp off after a long time.

3. Varnish, also known as van water, is a coating composed of resin as the main film-forming substance plus solvent. Varnish can be used to coat furniture, floors, doors and windows, and automobiles.

Summary. A careful comparison of solvent-based polyester paint and water-based floor paint can be seen, the disadvantage of solvent-based paint is that it contains free free mailing isocyanate, which can lead to asthma diseases and be harmful to health; Moreover, this lacquer is not resistant to scratches and cannot be used on cork floors; Plank floors are prone to yellowing. The advantage of water-based solid wood floor paint is that it is non-toxic and solvent-free odor; It is easy to apply on the painted surface and does not turn yellow.

It is more wear-resistant than solvent-based, more environmentally friendly, and greatly maintains the natural color and texture of wood flooring; The construction is convenient, there is no need to move the construction, and the painting tools can be washed; The products are divided into bright light, matte and semi-matte, which can be selected from a variety of times.

2. This kind of water-soluble paint is generally used on lacquer boards and plain boards. Lacquered panels are floors that are painted in the factory, usually UV painted, before being installed. UV lacquered flooring is easy to install and the installation tools are simple.

However, due to the installation of lacquer boards, the floor will inevitably have many floor joints, and these floor joints are often the dead corners of the cleaning of dirt and dirt. UV paint makes the floor plate like a layer of plastic film, which is smooth and bright, but it loses the original feeling of wood, and the wood feeling is the original pursuit of people using solid wood flooring. For users of solid wood flooring, in addition to the wood species, floor paint is a very important aspect of wood flooring, because it is the floor paint that protects the floor.

If you only pay attention to the wood species, there is no good floor paint to protect your floor, no matter how good the wood is, it is useless, so at this time you can use water-based floor paint to protect.

What paint to brush on bamboo floors.

A careful comparison of solvent-based polyester paint and water-based floor paint can be seen, the disadvantage of solvent-based paint is that it contains free free mailing isocyanate, which can lead to asthma diseases and be harmful to health; Moreover, this lacquer is not resistant to scratches and cannot be used on cork floors; Plank floors are prone to yellowing. The advantage of water-based solid wood floor paint is that it is non-toxic and solvent-free odor; It is easy to apply on the painted surface and does not turn yellow. It is more wear-resistant than solvent-based, more environmentally friendly, and greatly maintains the natural color and texture of wood flooring; The construction is convenient, there is no need to move the construction, and the painting tools can be washed; The products are divided into bright light, matte and semi-matte, which can be selected from a variety of times.

2. This kind of water-soluble paint is generally used on lacquer boards and plain boards. Lacquered panels are floors that are painted in the factory, usually UV painted, before being installed. UV lacquered flooring is easy to install and the installation tools are simple.

However, due to the installation of lacquer boards, the floor will inevitably have many floor joints, and these floor joints are often the dead corners of the cleaning of dirt and dirt. UV paint makes the floor plate like a layer of plastic film, which is smooth and bright, but it loses the original feeling of wood, and the wood feeling is the original pursuit of people using solid wood flooring. For users of solid wood flooring, in addition to the wood species, floor paint is a very important aspect of wood flooring, because it is the floor paint that protects the floor.

If you only pay attention to the wood species, there is no good floor paint to protect your floor, no matter how good the wood is, it is useless, so at this time you can use water-based floor paint to protect.

Hope it helps! Kiss. If it helps you, give it a thumbs up, thank you

If you want to make bamboo waterproof as a whole, you need to brush professional waterproof coatings. For example, K11 waterproof coating. Brush a thicker film to make it waterproof. When buying K11 waterproof coatings, you should choose those that have passed the China Environmental Labeling Product Certification to be environmentally friendly.

Brush with transparent lacquer (gold oil).