0x626ed060 directive references 0x626ed060 memory. The memory cannot be read

Updated on technology 2024-08-05
4 answers
  1. Anonymous users2024-02-15

    Possible causes of failure:

    1 The memory module is broken Replace the memory module.

    2 Dual memory is not compatible Use the same brand of memory or only one memory 3 Memory quality problems Replace the memory module.

    4 Heat Dissipation Enhancement of heat dissipation inside the case.

    5 The memory and motherboard are not plugged in properly or other hardware is incompatible Reinsert the memory or change the slot6 There is a problem with the hardware Replace the hard drive.

    7 Driver Problems Reinstall the driver, if it is a new system, you should install the motherboard driver first8 Software is corrupted Reinstall the software.

    9 Software bugs patched or updated to the latest version.

    10 The software and the system are not compatible Patch the software or try the compatibility mode of the system11 There is a conflict between the software and the software If you have recently installed any new software, uninstall the manuscript mill12 There is a problem with the software to use other related software Reinstall the related software, such as **An error occurred when a certain format of Wenqing Jing scramble, it may be that there is a problem with the decoder of this file.

    13 Virus Problems Antivirus.

    14 Antivirus software conflicts with the system or software Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

  2. Anonymous users2024-02-14

    Friends, the computer appears: the memory can not be read, the reasons are summarized, there are the following aspects, occasionally appear, point: cancel, you can!

    1.The computer has been hit by a Trojan horse or a virus is interfering!

    Try: Antivirus, 360 Security Guard + 360 Antivirus Dual Engine Edition, or Kingsoft Guardian + Kingsoft Antivirus, suggestion: fix "high-risk" and "important" vulnerabilities!

    Use "Trojan Cloud Scan" and "360 Antivirus", "Full Scan" and "Custom Scan" viruses and Trojans, remove them, and restart your computer!

    After turning on the device, click on "Isolate|".Recover", find trojans and viruses and remove them completely!

    box "! First "check and kill", after the investigation is completed, delete the "suspicious auto-start items" and Trojan horses, and then restart the computer!

    Then click on "Quarantine|".Recovery" area, find "Suspicious Auto-Start Item" and Trojan, and click "Delete completely"!

    Then click "Repair", "Select All", and then click "Repair Huai Grip"!

    3.With "360 Security Guard", "System Repair", one-click repair! Again: "Clean Plugins", Scan Now, Clean Up Now: Bad Review Plugins!

    For the "latest version"!

    QQ, or a variety of browsers, a variety of anti-virus software, a variety of online games, etc.)! They are not "compatible" together, remove the "redundant" one!

    6.How to uninstall: You can find "Force uninstall software from your computer" in the "Start" menu in the lower left corner of your computer, and find the excess one to uninstall! After unloading, "strong cleaning"!

    Or "360 Security Guard", "Software Manager", click on, item 4: "Software Uninstall", click on, find.

    Uninstall software to "redundant" and "similar"! Such as: "** device", click on, leave "storm", uninstall "fast broadcast"! Such as: "**": click on, leave "Thunder", uninstall "Express"! (Unload when you see it, don't unload the useful).

    8.No more, restart the computer, press "F8" after booting, press "Enter", press Enter, enter the "Safe Mode", "Advanced Boot Options", find: "Last correct configuration", press down to try, see how it works!

    9.No more, start menu, run, enter cmd, press enter, enter in the command prompt (copy it):

    for %1 in (%windir%\system32\*.dll) do /s %1

    Paste, press enter, and restart your computer until the screen scrolling stops!

    10.If you really can't do it, "one-click restore" the system or "reinstall the system"!

  3. Anonymous users2024-02-13

    Several possibilities, for your reference:

    2. There may be a problem with the game settings, so reset it.

    3. The computer configuration may not be supported.

    Also: Memory can't be"read"or"written"(Cause & Solution):

    The system appears that the memory cannot be"read"or"written"Reasons:

    1. The driver is unstable and incompatible with the system, which is most likely to cause memory cannot be read or file protection.

    2. One or more rogue software is installed on the system, which has a greater chance of IE or system crash, and file protection may also occur.

    3. There is a conflict between the programs loaded by the system or the programs that are running on the system, especially some antivirus software monitoring programs.

    4. There are vulnerabilities in the system itself, which makes it vulnerable to network attacks.

    5. Virus problems are also the main causes of memory can not be read, file protection, error ......

    6. If the memory cannot be read when playing the game, it is likely that the graphics card driver is not suitable (there are graphics cards that are not suitable for the game or the computer), or it may be that the version is not new enough or does not meet the game or graphics card driver.

    7. The problem that some software itself is insufficient.

    8. Overheating of computer hardware is also one of the reasons why the memory cannot be read.

    9. Poor compatibility between computer memory and motherboard is also the fatal reason why the memory cannot be read!

    Several solutions are available:

    1. Run and register all DLLs at one time, the method is as follows:

    Start – Run, type cmd Enter in the command prompt.

    for %1 in (%windir%\system32\*.dll) do /s %1

    You type this command slowly, click carefully, and if you enter it correctly, you will see the screen scroll quickly Otherwise, ......Otherwise, failure will not have this effect. After entering, wait slowly (it will take 1-2 minutes) and try the previous operation after running to see if there is still a phenomenon that cannot be read.

    2. See if you have Microsoft installed in the Add Delete program in the control panel, if it has been installed, you can consider uninstalling it, of course, if you need it in other programs in the future, you can reinstall it.

    Also, if you are using an ATI graphics card and you are using an SP2 patch (some ATI graphics card drivers need to be in a working environment). In this case, you can find an ATI graphics card driver that does not need support.

    If the above two methods do not completely solve the problem, you can try to use the "Internet Explorer" software, and you can check for viruses and so on.

    Microsoft should have no problem upgrading to the version

    3. There are many reasons for this problem. Generally speaking, it is to patch the system, replace the memory, and change the slot of the memory to solve the problem. [System patches can be updated as long as you go to Microsoft Update****!]

  4. Anonymous users2024-02-12

    The memory is broken, and you can change it.

Related questions
2 answers2024-08-05

The emergence of this problem is relatively common, and there are several main aspects: >>>More

2 answers2024-08-05

Close some programs that don't have to be opened.

If it doesn't work, --- >>>More

7 answers2024-08-05

The corresponding program is deleted and reinstalled.

3 answers2024-08-05

Hello! The computer appears: [The memory cannot be read and written], the reason is more complicated, please prescribe the right medicine! >>>More

2 answers2024-08-05

The memory cannot be a workaround for reads.

People who use the Windows operating system sometimes encounter error messages like this: >>>More