Why does the electric precipitator need to be cleaned, and what should I do if there is dust in the

It is that after a period of use, dust and fine debris will accumulate, which will affect the efficiency and life of the machine, and may even cause safety hazards. Therefore, the electrostatic precipitator needs to be cleaned regularly to ensure its efficacy and long-term use effect. Ash cleaning can help the electrostatic precipitator to keep ventilation unobstructed, effectively avoiding failures caused by dust accumulation and affecting the suction power of the vacuum cleaner.

In addition, the filters in the electrostatic precipitator need to be cleaned or replaced to prevent damage to the filtration effect.

Summary. Hello dear, for your inquiry if there is dust in the dust collector air duct, you can take the following measures:1

Clean the air duct: Use a vacuum cleaner or cleaning brush to clean the air duct and remove the dust. 2.

Replace the filter: If the filter of the dust collector has expired or is damaged, it needs to be replaced in time to ensure the normal operation of the dust collector. 3.

Regular cleaning: Cleaning the dust collector regularly can avoid dust accumulation and keep the dust collector clean. 4.

Strengthen indoor cleaning: Strengthen indoor cleaning and reduce dust generation, which can effectively reduce the dust accumulation in the dust collector air duct. I hope mine can be helpful to you.

Hello dear, for your inquiry if there is dust in the dust collector air duct, you can take the following measures:1Clean air ducts:

Use a vacuum cleaner or cleaning brush to clean the air and dust away. 2.Replace the filter:

If the filter of the dust collector has expired or is damaged, it needs to be replaced in time to ensure the normal operation of the dust collector. 3.Regular cleaning:

Regular cleaning of the dust collector can avoid dust accumulation and keep the dust collector clean. 4.Enhanced Indoor Cleaning:

Strengthening indoor cleaning and reducing dust generation can effectively reduce the dust accumulation in the air duct of the dust collector. I hope mine can help you.

2.During use, the filter screen of the dust collector should be kept clean, and the filter screen should be cleaned or replaced regularly. 3.

Pay attention to safety when using it, and avoid placing the dust collector close to fire sources or high-temperature objects. 4.When using, pay attention to whether the contact of the power plug is good to avoid accidents such as short circuit of the power cord or liquid fire.

5.When using, the dust collector should be avoided from being used continuously for a long time to avoid damage by overheating. 6.

When using, the dust collector should be avoided from being used for flammable and explosive materials in the vacuuming process, so as to avoid fire or **. 7.When using, the dust collector should be avoided from being used for sharp objects in the vacuuming process to avoid damaging the dust collector.

8.When using, avoid using the dust collector for wet items in the vacuuming process, so as not to damage the dust collector. 9.

When using, the dust collector should be avoided for large particles in the vacuuming process to avoid clogging the dust collector. 10.After use, the inside of the dust collector should be cleaned in time to avoid excessive dust accumulation affecting the use effect.

During the dust removal process, the electric dust collector controls the pulse air flow through a solenoid valve, so that the dust on the surface of the filter bag can be removed from the filter bag and then transported to the ash hopper under the dust collector. In the ash hopper, the dust can be centrally processed or re-transported to other equipment for use, such as incineration, incineration or landfill.

It should be noted that the electric dust collector dusts the ash into the ash hopper, and because the dust contains particulate matter, if not properly treated, it may cause secondary pollution to the environment. Therefore, appropriate measures need to be taken before the ash hopper is disposed of, such as humidification by means of a sprinkler system to avoid dust dispersion; Alternatively, it can be piped to a centralized processing site for further processing in a Weiss step.

In addition to this material combustion, in the process of using the electric dust collector, maintenance operations such as cleaning the ash hopper and replacing the filter bag are also required to ensure the normal operation of the equipment and the efficiency of dust removal.

The main difference between a dust collector and a vacuum cleaner is their power and suction power. Generally speaking, a dust collector will have less power and less suction power, while a vacuum cleaner will usually have more power and stronger suction power. So, if you wish to turn your dust collector into a vacuum cleaner to use, you need to take the following steps:

1.Confirm that the power of the dust collector is sufficient: If the power of the dust collector is too low, it will not provide enough suction power to clean the floor or furniture.

2.Replace the nozzle used by the dust collector: In general, the suction nozzle used by the vacuum cleaner will be longer and wider than the dust collector, which can better contact the ground or other objects in front of the surface, thus providing better suction power.

3.Replace the filter and dust bag in the dust collector: The vacuum cleaner usually has a better filtration system that can filter more different types and sizes of dust and debris, so it is recommended that Huihong roughly replace the filter system and dust bag in the dust collector to ensure better cleaning results.

In short, if you want to turn a dust collector into a vacuum cleaner, it should be noted that they have different power and suction power, and you need to take corresponding measures to improve its suction power and cleaning effect according to the actual situation. If this does not meet your expectations, it is recommended to replace it with a professional vacuum cleaner.

The dust collector cannot be used as a vacuum cleaner, because the power of the vacuum cleaner is much wider than that of the dust collector, and the use and suction effect of the two are completely different. Therefore, they cannot be used interchangeably.

The main components of desulfurization ash are calcium sulfate dihydrate, calcium carbonate, etc.; This ingredient is small in use and has a high cost, so it is commonly used for the following purposes.

1 Desulfurizer is a desulfurizer for pharmaceutical preparations in the alkaline solution of lime, limestone and lime in the removal of fuels, raw materials or other materials, 2 desulfurizers in alkaline solutions of lime, limestone and lime. The desulphurizer can absorb the sulfur dioxide remaining in the flue gas of the fuel, and most of the sector is fixed.

3 It can also be used for highway construction.

4 It can also be used in brick factory or cement factory as filling material.

If you still have questions about dust removal technology or dust collectors, you can consult Hebei Jiuzheng Tongming for a detailed understanding.

There are actually many reasons for the dust plugging of the electrostatic precipitator.

One is that the level gauge may have a problem with lead combustion, and the display is inconsistent with the ash level between the hands, and the other is whether the insulation of the ash hopper is not good. It makes the ash easy to harden when wet.

The third is whether the vaporization plate of the ash hopper is running well.

Fourth, the angle of the ash bucket is Huaiqing, not both sides are greater than 60 °. It is also possible that there are foreign objects in the ash, such as anode hammers, etc., and dust collector debris.

The electrostatic precipitator is a relatively old equipment, there are many environmental protection indicators trembling Gao Xiang has not been able to meet the relevant national environmental protection requirements, must be eliminated, it is recommended that the source of love can be changed to the pulse automatic dust collector can be automatically controlled by the pulse according to the amount of dust, automatic ash cleaning, saving personnel, good effect.