What are the main contents of daily maintenance of equipment?

Maintenance of the equipment.

Caring for equipment through general methods such as wiping, cleaning, lubrication, adjustment, etc., to maintain and protect the performance and technical condition of the equipment, is called equipment maintenance. There are four main requirements for equipment maintenance:

1) Cleaning The inside and outside of the equipment are neat and tidy, with all sliding surfaces and lead screws.

There is no oil stain in the rack, gearbox, oil hole, etc., no oil leakage and air leakage in all parts, and the chips, sundries and dirt around the equipment should be cleaned;

2) Neat tools, accessories, workpieces (products) should be placed neatly, pipes, lines should be organized;

Clean; 4) Safety: Comply with safety operating procedures.

Do not overload the equipment, the safety protection devices of the equipment are complete and reliable, and the unsafe factors are eliminated in time.

The maintenance content of equipment generally includes daily maintenance, regular maintenance, regular inspection and accuracy inspection, and equipment lubrication and cooling system maintenance is also an important part of equipment maintenance.

The daily maintenance of equipment is the basic work of equipment maintenance, which must be institutionalized and standardized. The regular maintenance of the equipment should be formulated with work quotas and material consumption quotas, and assessed according to the quotas, and the regular maintenance of equipment should be included in the assessment of the workshop contracting responsibility system. Equipment regular inspection is a planned preventive inspection, the means of inspection in addition to the human senses, but also have a certain inspection tools and instruments, according to the regular inspection card execution, regular inspection is also called regular inspection.

Accuracy checks should also be carried out on mechanical equipment to determine the quality of the actual accuracy of the equipment.

Equipment maintenance should be carried out in accordance with maintenance procedures. Equipment maintenance procedures are the requirements and regulations for the daily maintenance of equipment, and the implementation of equipment maintenance procedures can extend the service life of equipment and ensure a safe and comfortable working environment. Its main contents should include:

1) The equipment should be neat, clean, firm, lubricated, anti-corrosion, safe, etc.

2) Parts, methods and standards for daily inspection and maintenance and regular inspection;

3) The content and method of inspecting and evaluating the degree of maintenance of equipment by operators.

The main content of daily maintenance of equipment is how much lubricating oil is needed, otherwise there is no way to carry out such maintenance.

The main contents of equipment maintenance are as follows:

1. Cleaning. The inside and outside of the equipment are clean and tidy, there is no oil stain on the sliding surface, lead screw, rack, gearbox, oil hole, etc., no oil leakage and air leakage in all parts, and the chips, sundries and dirt around the equipment should be cleaned;

2. Neat. Tools, accessories, and workpiece products should be placed neatly, and pipelines and lines should be organized;

3. Good lubrication.

4. Safety. Abide by the safety operation procedures, do not overload the equipment, the safety protection devices of the equipment are complete and reliable, and eliminate unsafe factors in a timely manner.

How to do a good job in equipment maintenance:

1. Strengthen the daily maintenance of equipment to prevent miswarranty and omission.

The maintenance work must be enforced and should be linked to the reward and punishment system of the enterprise, reward the good and punish the bad, and mobilize the enthusiasm of the construction personnel. Do a good job in maintenance. The maintenance work should be grasped from the source to prevent repair instead of maintenance.

2. Strengthen the daily inspection of equipment.

Special personnel should be arranged to inspect the equipment points, and record the equipment operation status in detail through the intelligent handheld terminal, including the daily operation of the equipment, running time, maintenance times, etc., so as to analyze and judge the possible faults of the equipment and eliminate the hidden dangers of faults in a timely and accurate manner.

3. The management and monitoring of equipment should be strengthened.

Equipment management personnel should grasp the situation, understand the performance of the equipment, make a scientific and reasonable maintenance plan according to the advantages and disadvantages of the equipment performance and the allocation of enterprise resources, and manage and monitor the maintenance activities and procurement activities to avoid unnecessary waste of funds.

4. Establish and improve the repair and maintenance system of machinery and equipment.

Emphasize the role of equipment management and improve the data statistics system. The entry and exit of machinery and equipment, equipment operation, performance indicators and repair and maintenance should be registered in detail, so that one machine and one book can be checked.

Summary. What is the difference between maintenance and maintenance?

Good. Repair is maintenance.

Yes dear. Care and maintenance are said to be a concept and are not well understood.

The best place to do this is in the lower abdomen where the insulin is released too quickly by intramuscular injections.

The difference between the concept of maintenance and repair: The difference between the concept of maintenance and repair is about the degree of damage to the equipment, maintenance generally refers to the regular maintenance of the equipment when it can operate normally, while repair is the repair of the equipment that has been damaged. Repair:

It is to repair damaged computers. There are three definitions of repair, which are replacement parts, repair parts, renovation according to function, maintenance and restoration, maintenance, maintenance, and repair. Maintenance:

It is a daily maintenance such as cleaning the dust and oiling the fan of each component of the computer that is in good condition and not damaged.

What is the difference between repair, maintenance and maintenance?

There are two types of equipment maintenance: daily maintenance and regular maintenance.

Daily maintenance is referred to as daily maintenance. All the equipment used in the workshop should be guaranteed, and the work of daily protection should be borne by the operator himself. The purpose of day protection is to extend the service life of the equipment and create a safe and comfortable working environment.

Daily maintenance is divided into daily maintenance for each shift and daily maintenance on weekends, which must be institutionalized and standardized.

Regular maintenance: The regular maintenance of the equipment is scheduled by the maintenance department of the equipment power department according to the production and equipment operation conditions, generally once a year, in the off-season of production, and the vice president of production after consultation to arrange the staggered shutdown maintenance plan, and at the same time issue the plan to the equipment department of the division for implementation. Key equipment and fine, large and thin equipment are maintained by the maintenance department of the equipment power department, and general equipment is maintained by the machine repair group of the equipment department of the business department.

The basic content and requirements of equipment maintenance are as follows:

Equipment maintenance is the care of equipment during or after use. The operator is responsible for small maintenance after the shift every day and major maintenance after the shift every week.

The meaning of maintenance.

The maintenance of the equipment is the objective requirement of the equipment in the process of use. Due to the movement, wear, internal stress and other physical and chemical changes of the equipment, the process of preparing the ridge rock, the technical condition will inevitably change, as well as some unavoidable abnormal phenomena.

Do a good job in the maintenance of the equipment, check and deal with various problems in a timely manner, and improve the operation of the equipment, so as to prevent problems before they occur, eliminate undue friction and damage, and eliminate accidents before they occur.

The natural life of the equipment depends to a large extent on the quality of the maintenance work.

Mandatory maintenance. The compulsory equipment maintenance system is an equipment maintenance system created by China's industrial enterprises. The requirements are:

Regardless of the technical condition of the equipment, regardless of the severity of the production task, it is strictly in accordance with the maintenance interval of the equipment, and is enforced according to the specified scope of operation and requirements.

Device management content.

Equipment management is a general term for a series of organizational and planning work carried out around the equipment, which should include all management work in the process of equipment movement. The main ones are:

1. Selection and evaluation of equipment. According to the principle of advanced technology, economic reasonableness and feasible production, the correct selection of equipment, but also technical and economic evaluation to choose the best solution.

2. The use of equipment is imitated, and the production is reasonably arranged according to the characteristics of the equipment. A number of rules and regulations are established for the proper use of the equipment.

3. Inspection, maintenance and repair of equipment. Including the specified inspection content time, maintenance and repair cycle of wild wheels; Prepare regular inspection, maintenance and repair plans and organize their implementation; Organize the best reserve of equipment used for maintenance.

4. Transformation and renewal of equipment. According to the needs of developing new products and transforming old products, there is a plan and focus on the technical transformation and renewal of existing equipment, including the preparation of equipment transformation and renewal planning; Raise and fulfill, renew funds, select evaluation equipment, and reasonably dispose of old equipment.

5. Daily management of equipment, including equipment classification, registration, numbering, allocation of accident disposal and scrapping, etc.

6. The status and role of equipment management in the enterprise.