Change xenon, do not add lenses, do not hit the high beam on the opposite vehicle has no effect, the

If your car has headlights of H4, the lights will be very scattered, even if you turn on the low beam, the other party will think that you are high beam. Of course, the "effect" of turning on the high beam is better, because the H4 lamp is a double filament, it is the high beam and low beam together, and the xenon lamp is telescopic, the extension is the low beam, and the shrinkage is the high beam, because the light bowl is not the focus and the xenon lamp is consistent, so it is a mess.

If the lamp is changed to H7 or H1, the astigmatism is not very serious, and it can be used improvised. Because he is a single light, the focus is not much different, and it will be scattered, but there is more spotlight. You can see the light clusters.

The 4300k headlights you use work very well, they have little impact on the opposite driver, and the illumination effect is good, my car is also 4250k, no matter it rains, fogging, it works well. It's much stronger than the 6000k color temperature they changed, and the penetration is very good.

The big impact means that after the lamp is changed, the illumination angle of the near light is not as narrow as the original near light.

Turning on the low beam will have a little original light effect, which will have an impact on the opposite car, and the impact of the far light will be greater.

At the same time, it also has an impact on the car in front, and the reflection of the left and right rearview mirrors is too strong.

OK. Halogen lamps or copy xenon lamps are point light sources, and the main structure of the lens should be the spotlight bowl and the convex lens dao, the lamp bowl is to enhance the brightness, and the lens is to turn the point light source into parallel light. Therefore, the main parameters should be the focus of the lamp bowl and the focal length of the lens.

The physical structure of the lens determines that it is suitable for any point light source, whether it is a xenon lamp or a halogen lamp.

The lights are halogen lamps, and I want to change the lamp assembly recently, is it better to have xenon lamps or LEDs?

The original car with its own lens is not recommended to change the bulb directly, and the LED and halogen lamps have different light emitting points.

I'll tell you about this, the first copy, the light bulb installation.

After the position of the lamp is not in place, it is not not installed, it is the lens design that is not installed with xenon lamp, you can change the bulb, the two black shadows you said can be solved, the brightness is the same as before, I suggest that you still replace the bifocal lens, in that way, your lighting effect will be in place.

Hello, you can, but the original car lens effect is not very good, thank you for your support to the car master, I wish you a happy life.

Yes, but I would recommend that you change the lens with the xenon lamp.

The lens of the original car was single-light, and the concentrating effect was not good, so I changed the lens and the bulb myself. I changed the lens of Jinggang Sea 5 to a bifocal lens, and the lighting effect is much better than before after changing.

The effect of the original car lens is not modified good, a pair of xenon lamps are added separately, the effect is still not good, but also with astigmatism, and then a pair of LEDs are replaced, or not, and then a friend asked me to change the lens, see that he changed it well, I followed to change, the lens of the kus, it cost more than a thousand, I knew that it was not expensive, so I didn't spend money in vain, or change the lens, one step in place.

For the original car with lenses, it is possible to replace a pair of xenon lamps with a single pair, which will significantly improve the brightness of the low beam (most of the models with lenses are generally single light and low beam positions). A few things to note::

1: The replacement of xenon lamp must be consistent with the halogen model of the original car.

2: Although the installation is simple, try to find a more professional lighting shop to install. This leaves no small problems behind.

3: Be sure to replace the brand of xenon lamp ballast, the after-sales rate will be much smaller.

Although I can change it, but it has no effect, the general original car lens is not good, my car is, I changed the bulb a few times, it was useless, and then in Guangzhou Xuanlan car lights changed a set of bifocal lenses, the lighting effect is super good, much brighter, so I still directly change a bifocal lens.

The effect of the original car lens is not modified good, I added a pair of xenon lamps separately before me, the effect is still not good, but also with astigmatism, and then a pair of LEDs were replaced, or no, I spent money in vain, and then my friend asked me to change the lens, see that he changed it well, I followed to change it, changed the lens of kus, it cost more than a thousand, I knew that it was not expensive, so I didn't spend money in vain, or change the lens, one step in place.

OK. But to add a ballast, some European and American cars also need a decoder.

Yes, you need to install a ballast, I don't know what car you have? Most models can only be equipped with domestic ballasts, but it is not recommended that you replace them in this way, so that the effect is not obvious after replacement, and it is easier to after-sales, you can consider replacing the bifocal lens**, so that the effect will be greatly improved.

You can change the bulb directly, but the effect is not as good as the full replacement, because the lens of the original car is generally an ordinary single-light lens specially matched for halogen lamps, and the concentrating effect is not very good, nor is it wide enough or far enough. When modifying, bifocal lenses are used, and the light shield inside the lens is used to switch between high and low beams. When the visor is closed, it is low beam, and when the visor is open, it is high beam.

The bulb inside the lens is not moving, and there is no change. The concentrating effect is much better than that of a single light lens, and the near light tangent and high beam effect are significantly improved.

It is recommended not to add it, maybe it is to consider safety, and when you will drive, don't make the other party can't see anything, and it's white.

Nowadays, China's automobile market has been rising year by year, presumably we should also have experienced, which has also led to the prosperity of the automotive aftermarket, which also includes the automotive lighting modification market, although now the automotive lighting technology from the very beginning of the halogen lamp to the xenon lamp, and even now the more popular LED lens and more high-end avant-garde laser headlights, but now there are still some large brands of low-end models equipped with halogen headlights, everyone who has used halogen lamps are clear, halogen lamps are dim and dim, low service life, So everyone is looking for ways to change the lights, and now the two most mainstream solutions to change the lights are to change the LED bifocal lens or xenon lamp bifocal lens, so Chengdu Tianyi car lights will tell you the difference between their two products.

Let's talk about the xenon lamp lens first, the mainstream xenon lamp lens on the market today is Hella 5 xenon lamp lens or Osram xenon lamp lens set, we take the Osram xenon lamp lens of Chengdu Tianyi car lamp for example, first of all, we have to know that the xenon lamp lens is composed of a lens, a xenon bulb, and a stabilizer, and its brightness is 3 times that of the original car halogen lamp, and the service life is better than that of the halogen lamp. The color temperature of OSRAM xenon lamp lenses is between 4300 K and 6000 K, while halogen lamps are 3000 K.

We also said earlier that this is a xenon lamp bifocal lens, the bifocal lens is a combination of far and near light, most of the models are changed to the original car low beam, after the change is two near and four far light effect, the brightness performance is more excellent. Let's talk about the defects of xenon lamp lenses, xenon lamps have a start-up time of about 1-3 seconds to achieve the brightest light effect, and although the color decay of xenon lamps is much better than that of halogen lamps, it must have rapid light exhaustion with LED bifocal lenses. After talking about xenon lamp lenses, let's talk about LED bifocal lenses.

In terms of LED bifocal lenses, our domestic brands take the lead, one of the most representative products is Mishi LED bifocal lens and grid LED bifocal lens, these two products in Tianyi car lights have also been welcomed by the majority of car friends, we take the grid cool version of the LED bifocal lens as an example, its brightness and xenon lamp lens presumably, is about 4 times that of xenon lamp lens, and the low beam effect of the grid LED bifocal lens is the same type of LED lens in the most excellent performance, LED bifocal lens is different from xenon lamp, LED bifocal lens is integrated with lens, LED lamp beads, and cooling fan, which is more convenient to install, reduces damage to the internal components of the car, and its service life is 10 times that of xenon lamp lens, and the light exhaustion degree is extremely low, and the light exhaustion degree does not exceed 10% in 3-5 years.

Having said so much, I believe we all understand the difference between xenon lamp lens and LED lens, of course, xenon lamp lens and LED lens have their own strengths, now changing xenon lamp lens is more cost-effective, the process is more mature, and the choice of LED bifocal lens, higher brightness, no delay in starting is also a good choice.

After reading your question, it is better to modify the xenon lamp and add a lens.

First, the cost, without the lens seems to save the cost of the lens, but not just look at the surface, if you want to do not add the lens to bring other problems, how much does it cost us to solve these problems, if you do not add the lens, on the road will be checked by the traffic police, found to be fined, and you said the annual inspection problem, the annual inspection in the change back to the halogen lamp, this does not cost money. These are your potential costs.

Second, there is no restriction on the lens light type of the safe, bare xenon lamp, and there is no restriction on the light, which will cause trouble to pedestrians and vehicles, and there are potential safety hazards.

Third, the effect of illuminating the road, isn't the modification of xenon lamps just to illuminate the road brighter and look clearer. The lens can make reasonable use of the light energy of the xenon lamp, so that the best effect can be achieved.

Based on the above 3 points, do you think it is better to add lenses or not? And now the lens is not very expensive, only a few hundred domestic ones, and 2 are less than 1000.

Say more about it, I hope you don't change it naked, and I don't want to meet you when it's the scene of a car accident.

Let's briefly talk about the situation of domestic lenses, there are many domestic lens manufacturers, and the products are uneven. The new APA is based on new light type and high brightness, which is innovative. The others are somewhere in between.

I don't know if what I've said will be useful to you, but I hope it will influence those of you who want to change the xenon lamp naked. Safety, civilized modification, start from me.

Xenon lamps must be lensed, otherwise the astigmatism is too strong, and the impact on the oncoming vehicle is too great.

This is an act that harms others and oneself.

The function of the lens is to gather the light together to form a controllable light path, so that the places that need to be illuminated are brighter, and the places that do not need to be illuminated are not bright, so as to ensure the safe driving of vehicles in the opposite lane.

Without a lens, the light from a xenon lamp diverges in all directions, and its brightness is so high that when viewed from the opposite side, it is a completely dazzling white light. This can cause great tension for drivers driving in the opposite lane. Thus not being able to judge the outline of your vehicle in time leads to an accident, and you are the one who ends up hurting yourself.

Yes, but after installation, adjust the angle well, and try to shine the low beam on the ground, so that the oncoming car will not be affected.

If the traffic police in your place are not very strict about the modification of vehicle lights, you can directly install xenon lamps, but directly.

In the case of installation, generally speaking, the irradiation range and light concentration are not very good, but if the lens is installed, the angle of the light and light is good, and it is relatively not dazzling to the opponent's vehicle. It's up to you how you think about it. But whether you get on the lens or not, the right use of light is the most important thing.

You have to install a lens, or you can't see clearly, and you still dangle the car on the opposite side, which is too unsafe.

The role of the lens is to concentrate the light and not disperse it, do you think it is useful?

It's okay, but if you look at it in the car, it's not too bright, so it's just shaking each other. The low beam is really bright. I'm just a xenon lamp. I don't usually hit high beams. Easy car netizens.

Change is can be changed. However, the hernia lamp will diverge because there is no lens, and if it is a high-beam headlight, it will also cause the light to be unable to switch! So it's necessary to add a lens.

Hello, if the original car does not have a lens, the hernia headlights can also be modified in the later stage, if the hernia headlight bulb is changed alone, the effect is relatively poor, it is better to add lenses together.

If the original car does not have lenses, you need to change the assembly to change the hernia headlights.

Hello, according to your description, if the original car does not have a lens, this can be changed to xenon headlights. You can change the xenon headlights directly without adding lenses, and you can use them by buying a pair of xenon headlights and installing them directly.

There are 2 ways to change the xenon lamp without a lens, one is to directly buy a xenon lamp to replace the halogen lamp, but the effect of this method is not good, and it also seriously affects others. Insecurity. The second is to modify the xenon lamp, a complete set of modifications of bulbs, lenses, and ballasts.

Works best. Nor can it affect others.

If you need to change, you must add a lens, otherwise there are certain safety hazards, and the annual inspection can not pass.

Hello, this original car does not have a convex mirror, but it is also possible to modify the hernia headlights in the later stage, and then add a convex mirror.

Hello, the car can be installed without a lens to install a hernia lamp, but the effect is not obvious.