Xiaomi mobile phone keeps restarting and can t enter the system

Updated on technology 2024-08-09
10 answers
  1. Anonymous users2024-02-15

    The solution to the infinite reboot of Xiaomi phone:

    1. If the battery of your Xiaomi mobile phone can be removed, then check whether the battery interface is not in poor contact and causes restart, many of which are due to this reason;

    2. Take off the SIM card and try it, some friends are the countless reboot problems that occur after the SIM card is inserted into the Xiaomi mobile phone, and the failure disappears after removing the SIM card. If that's the case, you can only go to after-sales maintenance;

    3. Some Xiaomi models will automatically restart by pressing and holding the power button for 10 seconds by default, and you can check whether the power button is faulty. In this case, there is only a need to report for repair;

    4. If it's not a hardware problem, then try to update the system, or find a professional to flash the machine, but flashing is risky, so you should be cautious.

  2. Anonymous users2024-02-14

    Does the phone keep restarting in a loop, in this case, you need to clear the phone data. During power-on or loop restart, press and hold the volume on + power button to try to enter recovery mode; If you can successfully enter the recovery mode, select "Clear Data" up and down through the volume button, and press the power button to confirm; Then select "Erase All Data" and press the power button again to confirm; After the data erasure operation is successful, the phone will be restored to its factory state. If you have logged in to Xiaomi before, you will need to log in to the previous Xiaomi again to verify your identity when you turn on your device for the first time. If you cannot enter the recovery, or the data clearing operation after entering the recovery cannot be successful, or the data is still invalid after the data is cleared, it is recommended to go to the after-sales inspection and processing.

  3. Anonymous users2024-02-13

    Xiaomi phones. Keep starting, can't get into the system, if your phone is not good, so you can't get into the restart of the system, you can also enter the system, you can't enter the system, you can go to the manufacturer, you can go to the manufacturer, or on that mobile phone, well, you can check the manual to see what's going on? If you say you've been buying your phone for a long time, or what?

    You'd better format him for a while and see if you can surprise the ban on the system? If you can't get in, you have to need more professional equipment, reward that one to clean it, and see if it's good.

  4. Anonymous users2024-02-12

    There are many reasons why Xiaomi phone keeps restarting but can't turn on the wheel, here are some solutions:1Check the battery:

    First of all, you need to confirm whether the battery has enough power, and whether it is paired with a mobile phone socket to be able to charge, if it is an old battery, it may also be that the battery is aging. 2.Troubleshooting System Failures:

    Xiaomi keeps restarting Sometimes because of a system failure, you can try to reboot the system after the phone enters safe mode. The key to booting in safe mode is that the apps are not loaded after starting, and if there is a problem with the normal boot of the phone, it is easy to know which apps are wrong by entering safe mode at this time. 3.

    Remove the SIM card and SD card: Sometimes, removing the SIM card and SD card can also solve the problem of restarting, because these cards may cause some unforeseen errors, and our insurance solution is to remove these cards and restart the phone. 4.

    Factory reset: If the above methods still don't work, try using your phone's reset factory settings to solve the problem. After backing up your important data, you can choose to find "Backup & Reset" in the settings menu and tap "Factory Reset".

    5.The phone enters ** mode and flashes: If the above methods still can't solve the problem, you can try to let the phone enter ** mode, and then use the official flashing tool of Xiaomi Layu to flash the system.

    It should be noted that if you are not good at solving the problem manually, it is recommended to seek help from a mobile phone repair professional.

  5. Anonymous users2024-02-11

    Xiaomi keeps restarting but can't turn on, solution: first turn off the power cord, then press the power button and don't let go, directly plug in the power cord or remove the button battery of the motherboard to reverse the slag, and reinstall it in a few minutes.

    In this case, it is recommended to measure the battery voltage, the above can be turned on normally, not to activate the battery, it is not possible to change the sensitive tail plug or battery to try, with experience tail plug failure possibility. Or you can restore the factory settings or flash the machine to try, if it doesn't work, it's a hardware problem, focus on checking the motherboard baseband clock, and measure the power supply.

    The synchronous clock power supply is not normal, it is generally recommended to get the software first, and then the hardware. If the mobile phone cannot be turned on due to the low battery power of the mobile phone, the power of the mobile phone is seriously insufficient, resulting in the automatic shutdown of the mobile phone, and many times it still cannot be turned on normally after just plugging in the charger.

    Features of Xiaomi phones

    Perfect call, the call function of this mobile phone is very perfect, how can the mobile phone be full of signals. The signal is never lower than three bars, except in the subway or in places where there is no signal coverage. MIUI system is suitable for Chinese people,This mobile phone uses the MIUI system developed by Xiaomi Technology itself,The optimization of the system is very good,And this system is specially tailored for Chinese people,Very suitable for Chinese people's operating habits。

    The system is not locked,This is a good news for mobile phone enthusiasts and friends who like to play with the machine,We generally buy those big mobile phones are locked to the system of the mobile phone,You can't update or flash the phone yourself。 And Xiaomi mobile phone,There is no system lock,You can flash and update the system at will,At the same time, this mobile phone can also flash the native Android system。

  6. Anonymous users2024-02-10

    1.Software glitch: It is possible that there is an error in your phone's system that causes it to restart or not turn on.

    2.Hardware failure: It may be due to a hardware problem with the phone, which causes the problem that the phone cannot be turned on normally.

    For these situations, you can try the following methods to solve them:1Factory Reset:

    If your phone can enter the system interface, try a factory reset. Find the "Backup & Reset" option in the settings menu, select Factory Reset. Please note that this will delete all of your personal data and settings, so be sure to back up your important data ahead of time.

    2.Enter Safe Mode: If a factory reset doesn't solve the problem, you can try to enter Safe Mode.

    Press and hold the power button, and when the "Xiaomi" logo appears, immediately press and hold the volume down button to enter safe mode. In safe mode, you can try uninstalling the problematic app or find other possible solutions. 3.

    Use a wire brush: If your phone can't enter the system interface normally, you can try to use a line brush to flash into the new system. Please note that this operation requires a certain technical foundation, if you are not familiar with the operation of the wire brush, please operate it under the guidance of a professional to avoid irreversible damage.

    Software glitch: It is possible that there is an error in your phone's system that causes it to restart or not turn on. 2.

    Hardware failure: It may be due to a hardware problem with the phone, which causes the problem that the phone cannot be turned on normally. For these situations, you can try the following methods to solve them:

    1.Factory reset: If your phone can enter the system interface, try to restore the factory settings.

    In the settings menu, look for the missing line to the "Backup & Reset" option and select Factory Reset. Please note that this will delete all of your personal data and settings, so be sure to back up your important data ahead of time. 2.

    Enter Safe Mode: If a factory reset doesn't solve the problem, you can try to enter Safe Mode. Press and hold the power button, and when the "Xiaomi" logo appears, immediately press and hold the volume down button to enter safe mode.

    In safe mode, you can try uninstalling the problematic app or find other possible solutions. 3.Use a line brush:

    If your phone can't enter the system interface normally, you can try to use a wire brush to flash into the new system. Please note that this operation requires a certain technical foundation, if you are not familiar with the operation of the wire brush, please operate it under the guidance of a professional to avoid irreversible damage.

    4.Find a professional after-sales service: If none of the above methods can solve the problem, it is recommended that you send your phone to a Xiaomi after-sales repair center for repair.

  7. Anonymous users2024-02-09

    If your Xiaomi phone keeps restarting but won't turn on, it may be due to the following reasons:1Low battery:

    Please connect your phone to the charger and wait for a while before trying to open the potato. 2.Software Conflicts:

    In this case, you can try to enter the safe mode of the phone (method: press and hold the power button, then press and hold the "power off" button to enter the safe mode), restart the phone in the safe mode, and then exit the safe mode. 3.

    System Error: In this case, you can try to enter your phone's recovery mode (Method: Press and hold the power key and the volume "-" key at the same time until your phone enters recovery mode), then select the "Clear Data" or "Factory Reset" option and wait for your phone to restart.

    4.Hardware failure: If none of the above methods can solve the problem, it may be due to a hardware failure.

    It is recommended that you contact Xiaomi customer service or professional repairers for repair and inspection. Note: Clearing data or restoring data to factory settings will erase all your data, including **, contacts, text messages, etc.

    So, back up your data first to avoid data loss.

  8. Anonymous users2024-02-08

    Summary. Hello dear, happy to answer your <>

    If your Xiaomi phone keeps restarting and won't turn on normally, you can follow the steps below to deal with it:1Try force restarting your phone.

    Press and hold the power button and the volume down button at the same time for 10 seconds until the phone restarts. This may help resolve minor software crashes. 2.

    Enter the recovery mode for system repair. The way to do this is to press and hold the power button and the volume plus key until the Mi logo appears, then release the power button. Select "Erase Data" in the recovery menu and then select "Repair System" <>

    <> what should I do if Xiaomi keeps restarting but can't turn on?

    Hello dear, happy to answer your <>

    If your Xiaomi phone keeps restarting Sakura Qing and won't turn on normally, you can follow the steps below to deal with it:1Try to force restart the hand.

    Press and hold the power button and the volume down button at the same time for 10 seconds until the phone restarts. This may help resolve minor software crashes. 2.

    Enter the recovery mode for system repair. The method is to press and hold the power button and the volume plus button until the Xiaomi logo appears, and then Song Qingsong this power button. Select "Erase Data" in the recovery menu and then select "Repair System" <>

    <> kiss, or hungry, is <>

    <>3.Factory reset in recovery mode. The way to do this is to press and hold the power button and the volume plus key until the Mi logo appears, then release the power button.

    Select "Factory Reset" in the recovery menu and follow the on-screen prompts to return to work. 4.If none of the above methods can solve the problem, you can try flashing.

    Flashing requires certain expertise and skills, and it will erase all the data stored on your phone. Please back up your phone data before flashing, and then look for a suitable flashing tutorial on the Internet. If none of the above methods can solve the problem, it is recommended to contact Xiaomi customer service to solve the problem<>

  9. Anonymous users2024-02-07

    Dear, there may be many reasons why Xiaomi mobile phones keep banging but can't turn on, here are some common reasons and corresponding solutions:1The battery is too low:

    It is recommended to charge it for a while before trying to turn it on. 2.System Failure:

    You can try to press and hold the power key and volume down key to enter the recovery mode, and select "Wipe Data Factory Reset" and "Wipe Cache Partition" to clear your phone data. 3.Overloaded applications or virus infections:

    You can try to enter the safe mode, press and hold the power button, and then press and hold the "Power Off" and "Restart" buttons to enter the full mode of Anmumumu. In safe mode, uninstall apps that may be causing problems or use antivirus software to remove viruses. 4.

    Hardware failure: If none of the above methods can solve the problem, it is likely that the hardware failure is causing chaos, and it is recommended to contact Xiaomi after-sales maintenance service.

  10. Anonymous users2024-02-06

    Summary. Hello dear mobile phone boot unlimited restart may be a system crash, it may also be your battery or motherboard problem, first of all, it is recommended that you connect the mobile phone to the computer, through the Xiaomi assistant on the computer to reflash the system, if you can reflash the system, it should be caused by your system problems, if you can't reflash the system or reflash the system, the problem still exists, it should be the battery or motherboard has a problem, you need to send it to the official after-sales service for testing and maintenance, you yourself have no way.

    The Xiaomi phone keeps restarting and can't turn on.

    Hello, I am an electronic consultant deep in the soul, good at electronic product maintenance with 3 years of maintenance experience, a total of more than 1000 hours of 1v1 consultation, I am happy to solve for you.

    A: Please later, I am working hard to sort out the answer for you, and I will reply to you within 5 minutes.

    Hello dear mobile phone boot unlimited restart may be a system crash, it may also be your battery or motherboard problem, first of all, it is recommended that you connect the mobile phone to the computer, through the Xiaomi assistant on the computer to reflash the system, if you can reflash the system, it should be caused by your system problems, if you can't reflash the system or reflash the system, the problem still exists, it should be the battery or motherboard has a problem, you need to send it to the official after-sales service for testing and maintenance, you yourself have no way.

Related questions
12 answers2024-08-09

Dear Lenovo users, hello!

We apologize for the inconvenience caused by the use of your mobile phone. >>>More

17 answers2024-08-09

Have you ever overclocked?

Overclocking, if it is overclocked too much, karma is this symptom. >>>More

4 answers2024-08-09

Hi! It is recommended that you try the following methods: Click Settings - Applications - All - Find the software - Clear Data, clear the software data and then open it. >>>More

13 answers2024-08-09

The weather is hot, and the heat dissipation of the motherboard is not done well, I have encountered it before, and then the motherboard simply burned. Depending on the way you look, it will be normal to let the machine cool down for a while, move it around, and there will definitely be a cooling time in between. You can move somewhere else, like the technical department, and let the machine run for a day or two and see how it goes. >>>More

10 answers2024-08-09

The installation of dual SATA hard drives is very simple, just use the SATA hard drive data cable to connect the two SATA hard drives to the SATA1 and SATA2 ports respectively. After connecting, go into the BIOS and take a look, have you detected dual hard disks? Boot up your computer and go to "Standard CMOS Setup" in the BIOS. >>>More