How do you remove the Zotye steering wheel? Zotye Z300 steering wheel disassembled

There are two bolts on the rear cover under the steering wheel, which are removed and gently raised, and the clock spring is attached to the generatorConnectorsTake it down, generally there is a lock on the connector, some can be removed by pressing it, and some can be removed by pulling out the small pin.

Zotye Auto. It is an automobile manufacturing enterprise with R&D, manufacturing and sales of complete vehicles as its core business.

Brand field. Since 2016, Zotye Auto's sales have exceeded 300,000 units for two consecutive years.

At present, Zotye Auto has been established in Hangzhou, Chongqing, and Yokohama, Japan.

and Turin, Italy.

Four R&D centers have been set up, and three major technology platforms of A, B and L have been formed, and "six" firsts have been created in the field of new energy vehicles in China.

Zotye T600 steering wheel disassembly method:

1. Disconnect the Zotye T600 battery;

2. Turn the steering wheel of Zotye T600 about 90°;

3. Use a small flathead screwdriver to rise from front to back into the hole behind the steering wheel, 4. Insert the head of the screwdriver into the middle of the circlip and the airbag hook, and use the dexterity to move the circlip strip off the hook, and the side of the airbag will automatically pop out a little in the direction of the seat.

5. After that, turn the steering wheel of Zotye T600 180°, and continue to pick up the circlip on the opposite side (if it is difficult to pick up, it is recommended to gently press the side airbag that has been raised, but you can't press the buckle into the circlip again);

6. Remove the airbag, pick the yellow safety buckle behind the airbag, and then pull out the airbag plug to remove the airbag.

7. Pull out the socket of the airbag coupling coil above the inside of the steering wheel, and 8. Use the spline to loosen the fixing bolt in the middle of the steering wheel counterclockwise.

9. Finally, carefully remove the steering wheel of Zotye T600 (pay attention to prevent the coupling coil below from rotating accidentally).

Summary. 1. Disconnect the battery, 2. Turn the steering wheel about 90°, 3. Use a small flathead screwdriver to rise from front to back into the hole behind the steering wheel, 4. Insert the head of the screwdriver into the middle of the circlip and the airbag hook, and use the clever force to move the circlip strip off the hook, and the side of the airbag will automatically pop up a little in the direction of the seat. 5. After that, turn the steering wheel 180° and continue to pick up the circlip on the opposite side (if it is difficult to pick up, it is recommended to gently press the side airbag that has been cocked, but you can't press the buckle into the circlip again); 6. Remove the airbag, pick the yellow safety buckle behind the airbag, and then pull out the airbag plug to remove the airbag.

7. Pull out the socket of the airbag coupling coil above the inside of the steering wheel, 8. Use the spline of M12 to loosen the fixing bolt in the middle of the steering wheel counterclockwise. 9. Finally, carefully remove the steering wheel.

Hello, I have seen your question and am sorting out the answer, please wait for a while Oh Zotye 300 steering wheel disassembly.

There are two bolts on the back cover under the steering wheel, remove the bolts and gently raise them, and take down the connector connected to the generator by the dust type, which is generally locked on the connector, some can be removed by pressing it, and some can be removed by pulling out the small pin. Zotye Automobile is an automobile manufacturing enterprise with R&D, manufacturing and sales of complete vehicles as its core business. In the brand field, since 2016, Zotye Auto's sales have exceeded 300,000 units for two consecutive years.

At present, Zotye Auto has set up four R&D centers in Hangzhou, Chongqing, Yokohama, Japan and Turin, Italy, and has formed three major technology platforms of A, B and L, and has created "six" firsts in the field of new energy vehicles in China.

Is there a picture. Zotye 300 steering wheel disassembled.

Hello, I have seen your question and am sorting out the answer, please wait for a while 1. Disconnect the battery, 2. Turn the steering wheel about 90 degrees, 3. Use a small slotted screwdriver Huai Xun to lift from front to back into the hole behind the steering wheel, 4. Insert the screwdriver head into the middle of the circlip and the airbag hook, and use the clever force to move the circlip strip away from the hook, and the side of the airbag will automatically pop out a little in the direction of the seat. 5. After that, turn the steering wheel 180° and continue to pick up the circlip on the opposite side (if it is difficult to pick up, it is recommended to gently press the side of the airbag that has been cocked, but you can't press the buckle into the circlip again); 6. Remove the airbag, pick the yellow safety buckle behind the airbag, and then pull out the airbag plug to remove the airbag. 7. Pull out the socket of the airbag coupling coil above the inside of the steering wheel, 8. Use the spline of M12 to loosen the lead smile fixing bolt in the middle of the steering wheel counterclockwise.

9. Finally, carefully remove the steering wheel.

OK. Wait a minute, dear.

How do you disassemble the T600 steering wheel? There are two bolts on the rear cover under the steering wheel. Remove the bolt and lift it slightly, removing the connector that connects the clock spring to the generator.

Generally, the connector is locked, some can be removed by pressing, and some can be removed by pulling out the pin. The disassembly method of the T600 steering wheel is as follows:

1.Disconnect the Zotye T600 battery.

2.Turn the steering wheel of the Zotye T600 about 90°.

3.Use a small flathead screwdriver to hoist it from front to back into the hole in the back of the steering wheel.

4.Insert the head of the screwdriver between the clip spring and the airbag hook, and use dexterous force to lift the clip spring up from the hook so that one side of the airbag automatically pops out towards the seat.

5.After that, turn the steering wheel of the ZOTYE T600 180° and continue to pull out the opposite circlip (if it is difficult to pull out, it is recommended to gently press the side airbag that has been cocked, but do not push the buckle into the circlip again).

6.Remove the airbag, pick out the yellow safety buckle behind the airbag, and then pull out the airbag plug to remove the airbag.

7.Pull out the airbag coupling coil socket on the upper part of the steering wheel.

8.Use the spline to loosen the fixing bolt in the middle of the steering wheel counterclockwise.

9.Finally, carefully remove the steering wheel of the ZOTYE T600 (taking care to prevent the coupling coil underneath from turning unexpectedly).

Summary. Hello, helping you find the problem, please wait.

Hello, helping you find the problem, please wait.

Hello, there are two bolts under the steering wheel after the old cover of Dan. Remove the bolts, gently raise them, and take down the connector connected to the generator by connecting the clock spring.

Isn't this it. Yes.