Why the purple clay pot mud should be as long as possible

The longer the clay is to some extent, the better, but it needs to be re-refined before making the pot. The color of the mud with a long period of age is warmer than that of the mud with a short period of age, the plasticity is a little higher, and the feeling is not so hard.

The pot made of clay with a short period of decay is waterless and ugly. The stale period is long with water color, better looking, after soaking, warm and dignified, without any processing, it will be smooth and elegant when you start, comparable to three generations of copperware.

The process of purple sand aging can increase the viscosity of the mud and increase the compatibility of various constituent substances inside the mud. The stale purple sand mud generally has the following characteristics:

1. The longer the aging time, the more the firing temperature drops. With the improvement of modern kiln technology, the temperature in the kiln can exceed 1300 degrees, so some high-temperature mud can be used for firing after not being old for a long time.

2. The purple sand pot made of the stale purple sand material, after firing, the "water color" of the new pot is very good-looking, and the pot is also very good to raise, and the purple sand pot after raising the pulp is more "jade texture".

3. The workers use stale mud to make pots better than not very old materials, the mud properties of the materials are better, and the viscosity is better, so that the purple clay pot is not easy to crack when it is fired.

First of all, we must know what the stale of the purple sand pot mud is, and the stale of the purple sand mud is commonly known as the trapped material, that is, the reserve mud. After mining, the purple sand ore needs to go through a series of processes to achieve the conditions of making pots, which include drying, crushing, weathering, grinding, sifting, and mixing with water, and then making wet mud blocks, the outer layer is wrapped with plastic film, and then the reserved mud blocks are put into the impermeable sunlight and airtight cellar to maintain a certain temperature and humidity, and store them. This process is stale and occurs over a period of time (1-5).

The organic minerals in the purple sand mud can be fully decomposed and evenly distributed.

The stale mud in the purple sand mud has its own unique role in making pots.

When making pots, the plasticity of the mud is improved, and the cracking problem of most muds that have not been aged during the firing process is reduced when forming and drying. And the longer this mud is stale, the higher the plasticity, and for senior artists, flowers and more complex types are at your fingertips. The better the quality of the purple clay pot made, the faster the player will raise the pot to soak and raise the pulp.

The stale of purple sand mud is only a procedure in the refining of purple sand mud, and organic matter will only be decomposed into cooked mud through aging, and the mud is naturally good for pots when it is cooked. It is still necessary to note that only high-quality purple sand mud and a long period of aging can make high-quality purple sand mud, if it is a bad shallow purple sand mud, it is useless to have a long aging period.

Summary. Unfortunately, due to the high iron oxides and impurities of the purple sand mud material, it will adversely affect the body of the pot. First of all, the iron oxide in the clay will cause uneven spots and color changes on the surface of the pottery, which will affect the appearance and aesthetics of the purple clay pot.

Secondly, the iron will cause the mud to be prone to cracks and deformation, reducing the firmness and durability of the purple clay pot. Therefore, in order to ensure the quality and condition of the purple clay pot, we do not recommend using the stale iron of the purple clay to make the body of the pot. Looking forward to helping you!

Unfortunately, due to the high level of ferrite and impurities in the purple sand mud, it will adversely affect the body of the pot. First of all, the iron oxide in the clay will cause uneven spots and color changes on the surface of the pottery, which will affect the appearance and aesthetics of the purple clay pot. Secondly, the iron will cause the mud to be prone to cracks and deformation, reducing the firmness and durability of the purple clay pot.

Therefore, in order to ensure the quality and condition of the purple sand forest pot, we do not recommend using the stale iron of the purple sand mud to make the body of the pot. Looking forward to helping you!

I'm still a little confused, can you be more detailed?

The stale iron of purple sand mud contains high-iron oxides and impurities, which have an adverse effect on the body of the pot. First of all, it can cause spots and color changes, which can affect the aesthetics of the appearance. Secondly, it is prone to cracks and deformation, reducing firmness and durability.

In order to ensure the quality, it is not recommended to use this material to make the body of the pot.

The longer the purple sand mud is stale, the better?

Pulp refers to a layer of visible luster on the purple clay pot, and the slurry of the purple sand pot is a state in which the tea pulp seeps out of the body of the pot over time.

He is not like walnuts that rely on the sweat and dirt of human hands, but a state process of absorption after soaking and moisturizing tea leaves.

The purple clay pot will naturally exude a dull and restrained matte when it is cleaned every day.

But many people will say, my purple clay pot has been bought for a long time, why don't you slurry?

Gu Yuetang also met a customer before, he said that the purple clay pot has been bought for almost a year, not to mention the pulp, the pot surface is still not much different from the new one, and he actually smashed the purple clay pot angrily.

Seeing this move of the pot friend, Gu Yuetang is here to tell everyone why the purple sand pot can't raise pulp.

1. Mud causes.

The mud on the market is uneven, some are good, some are bad, and some are fake. It doesn't even take much time for a good mud to grow a smooth slurry. The worse the mud, the more general the soaking effect, and the time is also multiplied.

Of course, it is normal for pots like mud or simple clay to mix purple sand that cannot be raised for a year, because there is no air permeability, and it will not be able to be raised for a long time.

Not to mention chemical mud, everyone understands that if you don't cause harm to your body, you can burn high incense.

2. Soaking method.

Some people may be able to raise pulp in a month, and some people take three months, why is that?

In fact, it is related to the way everyone drinks tea, some people drink tea several times a day, and some people may only make tea once in three days.

The time and frequency are different, once every three days and several times a day, everyone should know this simple math, right?

3. Tea selection.

The time for different tea leaves to soak and raise purple clay pots is also different, and some tea leaves are oily, and nourishing their purple clay pots is also twice the result with half the effort, speeding up the pulping speed of the purple sand pot.

Like Pu'er, it is oily and is one of the fastest tea leaves to brew and raise purple clay pots. And like Tieguanyin, it is not inferior to Pu'er, and the nourished pulp is also very beautiful.

Of course, like green tea raising purple clay pots are also excellent, but they can't stand the long soaking time.

Some pot friends said that playing the purple clay pot for many years, the most wrong but also meaningful thing I have ever done is to use green tea to make a purple clay pot.

He said that he doubted his life, and even sometimes wondered if there was something wrong with his purple clay pot, and it was really difficult to make green tea brew and grow pulp.

Toning is the result of oxidation! Whatever tea you brew will be pulp, the key is to wipe it with a dry towel and it will be beautiful!

What is the best pulp for raising a purple clay pot is as follows:

Avoid pouring tea soup. Some people like to pour tea soup, which is the so-called external pulp, because the external pulp is fast and the effect is obvious, but the external pulp cannot be lasting, which belongs to the false pulp; If you pour tea soup, you must wipe it evenly in time, and after brewing tea, it is necessary to clean and dry, do not let the tea soup stay on the pot, which will breed bacteria, and tea stains will also block the pores of the purple clay pot, affecting the effect of the pulp.

Remember to wash your hands before holding the pot. The purple clay pot has adsorption, and it is most afraid of oil smoke, so before taking the purple clay pot, you must remember to wash your hands to avoid the grease on your hands from being contaminated on the purple sand pot, which will affect the soaking effect of the purple sand pot.

Make tea frequently and use it frequently. Some people are reluctant to use the purple clay pot when they buy it, and simply store it, and find it more and more dim after a long time. Make tea and drink tea frequently, and the substance in the tea will gradually penetrate into the ridge to form a beautiful pulp, remember not to store the pot.

The soaking of the purple sand pot is not an overnight thing, if you want to raise the best pulp, you have to give her enough time, the purple sand pot pulp is the need for time to polish and play the pot's feelings infiltration, you can imagine that whenever the pot player, in the process of drinking tea, with his hand to touch his love pot, relax the body cherry blossoms at the same time, especially the love of the pot.

What is staleness?

After mining, material selection, weathering, crushing, screening, purification and other processing steps, the purple sand ore is mixed with water, turned into mud, maintained at a certain temperature and humidity, and stored in a closed environment that is opaque. This storage process, that isTrite

Stale is also known as "aging", the ancient name is "soil raising", also called "mud storage".

Ageing facilitates the oxidation and hydrolysis of the mud (uniform distribution of moisture). In the process of aging, it also has the role of bacteria, which promotes the decomposition and decay of organic matter and produces organic acids. After the organic matter becomes colloidal, the plasticity of the mud will be further improved, which is more conducive to the molding and firing of the work.

After a long period of aging purple sand mud, we call it "old mud" or "saprolite".

The longer it is stale, the better the finished product. After the purple clay pot made of old mud is fired, it will appear more warm and watery, and the tone will be deepened.

The longer the mud is stale, the better the mud will be, and there will be no negative effects.