Kite Making Easy Learning 20, the simple process of making a kite

Summary. 1. Prepare materials: colored paper, bamboo sticks, transparent paper, silk thread, scissors, glue, etc.

2. First of all, make the transparent paper into a rectangle and coat it with white glue around it. 3. Then glue the three bamboo skewers and stick them on the transparent paper. 4. Then fix it with tape.

5. Continue to paste the thin sheet of paper on the transparent paper and paste the pattern you like. 6. Finally, the silk thread can be fixed and pasted on the kite. 7. The kite is made.

The simple process of making a kite.

Hello, dear, the simple process of making a kite is as follows:

Please hurry. 1. Prepare materials: colored paper, bamboo sticks, transparent paper, silk thread, scissors, glue, etc.

2. First of all, make the transparent paper into a rectangle and coat it with white glue around it. 3. Then glue the three bamboo skewers and stick them on the transparent paper. 4. Then fix it with tape.

5. Continue to paste the thin sheet of paper on the transparent paper and paste the pattern you like. 6. Finally, the silk thread can be fixed and pasted on the kite. 7. The kite is made.

Could it be simpler?

Okay, kiss.

Kiss, 1. Use two disposable chopsticks to make a kite skeleton. 2. Select a cardboard similar to the size of the skeleton and draw the shape of the kite. 3. Cut the kite according to the outline. 4. Use the skeleton to fix the kite, put on the connection in the center, and the simple kite is ready.

The kite making tutorial is as simple as this:

Kites were invented by ancient working people in the Spring and Autumn Period of the Eastern Zhou Dynasty in China, and have been around for more than 2,000 years. Over the long years, our ancestors have created many patterns that yearn for a better life and symbolize auspiciousness. These patterns skillfully use people, animals, flowers and birds, sun, moon and stars, wind, rain, thunder and lightning, etc., with myths and legends, folk proverbs as the theme, and make a perfect integration with kites.

So how do you make a kite?

First of all, prepare a piece of paper with good toughness, thin and light, 50 cm long and 30 cm wide, and the paper used to make traditional kites is generally made of cotton, rice paper, leather paper, etc. Prepare two more sticks of wood, one 30 cm long and the other 50 cm long, fold them to form a cross and tie them with rope.

The top of the cross is 15 cm high and the lower part is 35 cm high, glue the prepared paper to the cross with a glue gun, cut off the excess, and prepare two nylon ropes. Tie the two ends of a rope to both ends of the short wooden strips, and then tie one end of a slightly longer nylon rope to the ** of this nylon rope, and connect a bundle of very light strings at the end of the nylon rope when preparing to fly, so that the kite will fly higher and higher.

The production process of kites is relatively simple, and the production methods are also diverse, and the above method is the easiest way, and you can make kites through simple materials.

The kite making tutorial is as simple as this:Prepare paper, bamboo sticks, tape, cuts, thread. Use scissors to cut a square from the paper, and the diagonal of the square should be about the same length as a bamboo skewer.

Place a bamboo skewer on the diagonal of the square and secure the ends with tape. Then place another bamboo skewer on the diagonal of the square and fix the ends with tape, and the skeleton of the kite is ready.

From the remaining paper, cut two slender strips and use them to make the tail of the kite. Tape both tails to one corner of the square. Except for the horn of the tail, the other three horns are tied to the line.

Concentrate the three lines on one point, when this point is pulled up, the center of gravity falls on the intersection of the two diagonals, and then tie the three lines into a knot, after this knot, you can connect a longer kite line, dismantle it early, and the simple kite is ready.

A simple kite making tutorial is as follows:Tools and materials: scissors, cotton swabs, bamboo mufts, transparent paper, white glue, tissue paper, silk thread.

1. Make the transparent paper into a rectangular shape and coat the surrounding area with white glue tumbling rock.

2. Glue the three bamboo skewers and stick them on the transparent paper.

3. Use tape for quick fixing.

4. Paste a piece of tissue paper on transparent paper and paste the pattern you like.

5. Fix the silk thread on the kite.

1.Prepare materials (paper, bamboo, thread, scissors, glue, etc.).

2.Choose paper, preferably one that is thin and flexible, so that the paper kite can rise more easily.

3.Do a good job of framing. The bamboo is cut to the corresponding length and quantity to form a hexagonal frame, which is fastened with thread. It is important to note that the tension of each line needs to be equal in bulk for the frame to be firm and stable.

4.Make spools. Twist and tease the thread around the spool, paying attention to the choice of spool size and length so that it is firm and not tangled when used.

5.Cut out the appropriate size of paper to serve as the surface of the kite. Draw the pattern or figure you want on the surface, or paste some on it. This makes the kite more aesthetically pleasing and easy to identify.

6.Paste the surface paper on the frame and glue it well.

7.Finally, attach the spool to the center of the frame and make sure that the length of the spool can fit up to the height you want to fly your kite. If needed, you can also tie some small weights to increase stability and make the kite fly more smoothly.

Once you've completed all the steps, it's time to fly your kite in a wide open area. Kite making is not only a fun and creative activity, but also a great way to build your child's teamwork and craft skills.

The kite making tutorial is as follows:

1. First of all, soak the bamboo strips in water to make the bamboo strips soft, and then the slag wheel will break the bamboo strips with a knife, about one-third of the thickness, and then trim the half-shape, because the bamboo strips will be pasted on the horse-drawn paper later, if it is too thick, the bamboo strips will break the paper, and at the same time, the bamboo strips are too thick, and the yarn paper strips will not be stable. Cut the trimmed bamboo strips into two lengths of about 16 inches and 23 inches. The next step is to cut the horse-drawn paper into a square sock stool, about 24 inches long, which is a kind of rough paper that is not usually used in the war, and is most suitable for kites.

2. At this time, you can stick the bamboo strips on the paper, but remember to tie the long bamboo strips with gauze paper in one third of the short ones, and then slowly bend until the two ends of the long bamboo strips touch the opposite corners of the paper and paste it.

3. The last step is to stick the tail of the kite under the kite, and after the angle between the line and the kite, it can be launched.

4. The tail of the kite is the main tool to balance the kite, when the kite rides the wind, if one side is heavier, the kite will be biased to this side, and the tail is better to be longer, because the longer it will be a weight The head of the kite rises, so that the whole body is affected by the wind, balancing the oblique side.

5. The silk thread of the kite can be divided into round threads and row rollers with cowhide threads, cotton threads, glass threads, etc., and the threads should be tied to the kite at an oblique angle.

Expansion: Kites were invented by ancient Chinese working people in the Spring and Autumn Period of the Eastern Zhou Dynasty, more than 2,000 years ago. According to legend, Mo Zhai made a wooden bird out of wood, which was developed for three years, which is the earliest origin of human kites.

Later, Lu Ban used bamboo to improve the kite material of Mo Zhai, and it was not until the Eastern Han Dynasty that Cai Lun improved papermaking and began to make kites with paper, called "paper kites".

The kite making tutorial is as follows:

1. Prepare materials: colored paper, bamboo sticks, clear paper, silk threads, scissors, glue, etc.

2. First of all, make the transparent paper into a rectangle and coat it with white glue around it.

3. Then glue the three bamboo skewers and stick them on the transparent paper.

4. Then fix it with tape. Continue to stick the thin sheets of paper one by one on the transparent paper and paste the pattern you like.

5. Finally, the silk thread can be fixed and pasted on the kite. The kite is made.

Another kite making tutorial is as follows:

1. First soak the bamboo strips in water to make the bamboo strips soft, and then use a knife to break the bamboo strips, about 1 3 thickness, and then trim the half-shape. Because later on, the bamboo strips will be pasted on the horse-drawn paper, if they are too thick, the bamboo strips will tear the paper. At the same time, the bamboo strip is too coarse to cover the cavity, and the yarn paper strip is unstable.

Cut the repaired bamboo strips into two lengths of appropriate length, about 16 23 inches. Then the horse-drawn paper is cut into a square, about 24 inches long. Mara paper is a very coarse paper that is best suited for kites.

2. Next, you can stick the bamboo strips on the paper, but remember: tie the long bamboo strips with gauze paper to the short 1 3, and then slowly bend until the two ends of the long bamboo strips touch the opposite corners of the paper, and then paste it.

3. The next step is to stick the tail of the kite to the bottom of the kite, and after the angle between the line and the kite, it can be released.

4. The tail of the kite is the main tool for the balance of the kite, when the kite rides the wind, if one side is heavier, the kite will be biased to this side. It is better to have a longer tail, because the longer it is, the head of the kite will rise, so that the whole body will be exposed to the wind, and the oblique side will be balanced.

5. The silk thread of the kite can be made of cowhide thread, cotton thread, glass thread, etc., and the thread roller can be divided into round thread roller and row roller. The thread is tied to the kite at an angle.

Here's how to make a simple kite:

Material preparation: kite paper, bamboo or wooden strips, nylon rope.

1. First of all, prepare a piece of paper with good toughness, thin and light, 50 cm long and 30 cm wide. The paper used to make traditional kites is generally cotton paper, rice paper, leather paper, etc.

2. Then fold the paper into a diamond shape, or draw a diamond shape, and cut off the excess ground part to make the paper into a diamond shape. As you can see, this diamond-shaped (diamond-shaped) has a base of 15 centimeters and an upper part of 35 centimeters.

3. Go ahead and prepare two wooden strips, one 30 cm long and the other 50 cm long, fold them to form a cross and tie it with a rope, the top of the cross is 15 cm high, and the lower part is 35 cm high.

4. Then poke two small holes in each of the four corners of the cut paper, so that you can use nylon rope to fix the ten cross characters on the paper.

5. Then prepare two nylon threads, as shown in the figure, tie the two ends of a rope to both ends of the short wooden strips, and then tie one end of a slightly longer nylon rope to the ** of this nylon rope.

6. Finally, tie some streamers to both ends of the kite and the tail, and when you are ready to fly, you should connect a bundle of light strings at the end of the nylon rope, so that the kite will fly higher and higher!