-
1.The upper part of the Coke bottle is about 1 3 places to block the waist with a knife, cut it flat, and then paste beautiful flower paper or cellophane on the outer wall of the bottle, make some small modifications with scissors at the mouth of the cut bottle, fill it with water, and a beautiful vase will be created by your skillful hands.
2.Cut off the small section of the mouth of the bottle, and the remaining part is a cylindrical thing that is sealed below and opened above, and then use scissors to cut the surrounding of the cylinder into thin strips, break them into the shape of branches and leaves by hand, and then use various colors of paper to cut into the shape of small flowers, kittens, and puppies and paste them on the thin strips, and then make some other decorations according to your preferences, so that the bottle itself is a vase with flowers.
You can also use it as follows.
Four empty bottles, wrapped in cloth or paper and glued, with a small plywood on top, which can be used as a small table for playing, and some toys can be held in the jar.
Large beverage cartons made of paper, such as large milk cartons and large juice cartons, are glued or sewn into small shirt shapes with cloth on the outside, and small cuts are made in the shirt pockets to hold coins.
The outside of the glass bottle is wrapped with hemp rope in a circle, and then glued with colorful buttons to make a vase.
-
Don't throw away discarded Coke bottles, see how the guy turns waste into treasure, it's a pity that this mind is not a scientist.
-
1.The large drink bottle is about 1 3 places on the upper part of the waist with a knife, cut it flat, and then paste a beautiful flower paper or cellophane on the outer wall of the bottle, make some small modifications with scissors at the cut bottle mouth, fill it with water, and a beautiful vase will be created by your skillful hands.
2.Cut off the small section of the mouth of the bottle, and the remaining part is a cylindrical thing that is sealed below and opened above, and then use scissors to cut the surrounding of the cylinder into thin strips, break them into the shape of branches and leaves by hand, and then use various colors of paper to cut into the shape of small flowers, kittens, and puppies and paste them on the thin strips, and then make some other decorations according to your preferences, so that the bottle itself is a vase with flowers.
-
Introduction. With the development of the times, environmental protection has been paid more and more attention. And each of us can start from our side by bit. Today, let's talk about how beverage bottles can be turned into valuable and practical items.
Make a hanging flower pot.
The first way is to make the bottle into a hanging pot. First of all, cut the top of the bottle, then cut out the appropriate size window on the bottle, and fill it with soil, you can plant some creepers or other potted plants. Tie these bottles to windows or balconies and they become a sight to behold.
Make a pen holder. The second way is to make a pen holder from a drink bottle. Cut the bottle, remove the tab and cap, and the rest can be used as a pen holder. If you want to personalize it a little more, you can do it with a coloring pen on the outside to make it even more beautiful.
Make a manhole cover. The third way is to make a manhole cover for a beverage bottle. It may sound a bit mysterious, but it's actually very simple to implement.
Cut off the bottom of the bottle and then put it into a circle, corresponding to the size of the wellhead, and you can turn it into a garbage manhole cover. This little idea can make a difference in the cleanliness of the home environment.
Make a lampshade. The fourth way is to make a lampshade from a beverage bottle. For this approach, we need someone who is more artisanal.
Cut off the bottom and top of the bottle respectively, then cut the bottle body into fragments according to your preference, and finally use some milk glue to splic.
Summary. These are all ways in which beverage bottles can be repurposed. Reducing waste, protecting the environment, and reusing are all things that society needs us to do now.
No matter from what point of view, the use of waste not only reduces the accumulation of garbage, but also saves our environmental resources. Every little action can make our environment better, so let's take action together!
-
New ways to turn beverage bottles into treasure include vases, chopstick tubes, funnels, measuring cups, and small watering cans.
1. Make vases.
Some empty glass bottles can be decorated a little, and then pour in water and arrange flowers, so that it is very beautiful, and there is no need to go to Yuyou to buy another vase.
2. Chopsticks.
Wrap the glass bottle from the neck of the bottle with a circle of cotton yarn soaked in alcohol or kerosene, light it and when the fire is about to be extinguished, put the bottle in cold water so that the glass bottle will be cut neatly. It is also practical to use the lower half to make a chopstick holder.
3. Make funnels.
Use scissors to cut from the middle of an empty Coke bottle, the upper part is a very practical funnel, and the lower part can be used as a water cup.
4. a measuring cup.
Some bottles (such as discarded baby bottles, etc.) have scales, which can be used as measurement standards with a little processing.
5. Make a small mill watering can.
Some bottles are so colorful that they can be discarded and can be used to make a practical little watering can. When using waste bottles to make small watering cans, just tap some small holes in the bottom of the bottle.
-
A bottle can be transformed into treasure through creative transformation.
Wash the waste bottles to remove dirt and labels from the surface. According to personal hobbies and specialties, you can start from aesthetics, practicality, green environmental protection, etc., and design ideas that can be reused bottles. Cut a section of the bottle vertically to make a vase, and then paint the inside or attach your favorite sticker to make a vase with a unique gift charm.
You can make bottles into a variety of beautiful and artistic decorations, such as bottle lights, bottle cages, bottle flowers, etc., you can design and make them yourself, or you can refer to the creative tutorials on the Internet. Labels such as cereals, sugar, salt, and preserves are attached to the bottles, and they are used as neat storage jars.
In short, there is a lot of creativity and room for the reuse of waste bottles, as long as you use your hands and feet, you can turn waste bottles into useful items and give full play to your imagination. This is not only an environmentally friendly action, but also makes our lives more colorful.
Precautions for daily disposal of waste bottles
1. Classification**. Waste bottles are classified according to materials, such as glass bottles, plastic bottles, metal bottles, etc., for subsequent reuse and **.
2. Clean it well. Before discarding bottles, impurities and residues inside and outside the bottles should be cleaned so as not to affect the reuse and reuse of bottles.
3. Remove the cap and label. When the bottle is wasted, the cap, label and other impurities on the bottle should be removed for subsequent processing.
4. Pay attention to safety. When disposing of waste bottles, safety should be taken into account to avoid bottle breakage or injury.
5. Storage method. When waiting for ** or disposing of waste bottles, you should put the bottles in a cool, ventilated and dry place to avoid moisture, pollution and other problems.
-
Plastic bottles are wonderful, turning waste into treasure.
-
Discarded beverage bottles can be used as showers, and here's how to do it.
Materials required: a clean drink bottle, a round cap, a needle, a marker.
1. Take a clean drink bottle.
2. Take a round bottle cap or other object and draw a circular outline with a marker.
3. Prick some small holes with needles in the outline.
Fourth, the completion is shown in the figure below.
5. Connect it to the shower tap.
6. Turn on the water tap.
7. The effect of the shower made by using the beverage bottle is as follows.
-
Cut off the bottle mouth part and use this part of the bottle mouth to tighten the closure of the clinker bag, which is very sealed.
Cutting a bottle in half to make a funnel is simple and convenient.
It can also be used in the kitchen as a tool for storing chopsticks and spoons.
Remove the upper part of the bottle, leave the lower part, and then use the decorative thread, which can be used as a beautiful basket to store some small parts.
Fix the key flowers and plants on the wall, very creative approach.
If you have a good hand, you can transform it into a beautiful decoration.
-
It can be filled with laundry detergent, laundry detergent, and soy sauce in a bag, but it is best to put a label on the bottle so that it does not become a drink.
-
Make plastic bag storage buckets from discarded beverage bottles.
-
There are many uses, you can look them up, such as making an ornament, which can be made into a funnel.
-
You can put it in the kitchen to fill it with spices.
-
A lot of leftover vat bottles at home? One trick turns waste into treasure.
-
2 plastic bottles can be turned into an hourglass, fill it with some sand, and fix it with adhesive tape, and you're good to go.
-
Waste utilization, Coke bottles handmade beautiful sky garden, like to make one quickly.
-
It is possible to make a watering can. Tie the eyes of different sizes with a needle or awl on the cap, and a simple and convenient small watering can is made, which can be used to water the flowers and plants.
01Cut the plastic bottles of Sprite, Coke and other drinks from 7 cm to 8 cm from the bottle mouth, remove the cap, and turn it upside down to create a simple funnel.
01Make a hanger.
Cut off the top half of the waste drink, and put the bottom half on the drying rack to dry thick clothes, which not only dries quickly, but also keeps the shoulders rounded.
01 The remaining plastic bottle is cut off again, wrapped in beautiful wrapping paper, and fixed on the desk, which can be used as a pen holder.
Plastic bottles. Skillfully make a "flower pot".
Xiaomei likes to plant flowers and plants at home, sometimes if the flower pot is not enough, you can use a large plastic bottle instead, first make a hole in the hook on the plastic bottle, and then fix it on the wall, and then make a few small drainage holes on each plastic bottle. >>>More
Basically the same! The main thing is to see that there is a logo under the bottom of the bottle, triangular, with a p in the middle, such as P1, this is heat resistance, and this logo is high heat resistance! Therefore, general plastic beverage bottles should not be filled with boiling water to drink!
I think it's very practical to make flower pots from beverage bottles, which is equivalent to waste recycling
Friends who like to raise flowers, with more and more expenses at home. I also like to try to grow flowers in various containers. For example, use empty oil cans, beverage bottles, wine bottles, foam boxes, laundry buckets, etc., simple cutting, drilling holes into a beautiful flower pot. >>>More
wine, pour in a drink bottle.
Don't drink it again after half a month. >>>More