How to set up a wireless router to prevent rubbing the net

Hello, enter the wireless justification device settings page, change the network name in the wireless settings, and then turn off the SSID broadcast, save, so that others can not search for your wireless network, you can use the wireless network at home by adding the network, you can also use the static IP, bind the MAC to achieve anti-rubbing network.

I once bought 3 wireless routers, 2 wireless network cards, and 1 flat panel antenna, specializing in anti-rub nets.

First, the router encryption is best to choose the WAP method, WEP encryption is simply a scum, the password is complex, it can be cracked in less than 10 minutes, and the WAP method can also be cracked (now the cracking software is powerful, and the graphics card can be used to accelerate the cracking), but it will take at least 1 week, and now the newer wireless routers of various brands and models have WPA encryption and even WPA2 encryption functions, more complex passwords should be set, and it is best to change them frequently, especially to replace the long passwords that alternate letters and numbers, This makes it difficult for people to crack the password.

2. Hide SSID, in the settings of the wireless router, select "Hide SSID" or "Prohibit SSID Broadcasting". In this way, it is not easy to be searched by those who "rub the net".

3. Bind the MAC address, and set the MAC address of the computer that is known to be going to access the Internet through the wireless router in the router, so that the wireless router only recognizes the bound computer, and the user is helpless.

4. Change the IP address and login password of the router, and disable DHCP. Set your computer to a fixed IP, and then set up a static route in the router, so that even if you crack the password, you can connect to the router, but you can't get the IP address and gateway to surf the Internet, and you can't let the surfer surf the Internet.

1. Set up wireless encryption. Log in to the management interface of the router, click Wireless Settings > Wireless Security Settings, select the encryption method as WPA-PSK WPA2-PSK, and set the password as a combination of letters, numbers and symbols, and the length should be no less than 12 digits;

2. Set up wireless MAC address filtering. If the terminal using the network is basically fixed and no one else will often access the wireless network, it is recommended to enable wireless MAC address filtering to allow only the devices of all family members to access. How to set it up:

Log in to the router's management interface and click . Wireless setup.

Wireless MAC address filtering, add the MAC addresses of wireless terminals in the usage environment to the allowlist, and enable rules.

You can try the following steps to solve the problem:

1. First log in to the management interface of the wireless router, view the user list, the default router address is, enter it into the IE address bar, if the address is not correct, the manual shall prevail.

2. Enter the management interface of the road excitor device, and the first thing you see is the macro running state to ensure that you can access the Internet normally; Then click on the DHCP server and click on the list of clients.

3. In the client list, you can see that the number of connected users is clear, and all users are displayed on it. You can set up an anti-rub net.

I use a wireless router to open broadband, and sometimes there are people who ask you for your password, and you are embarrassed not to say it. In this way, your routing password is likely to be known by others, so people often rub the Internet. Next, I will teach you how to set up the router to prevent rubbing the network.

How to set up the router to prevent network rubbing

The first thing we do is log in to the router. Then enter [ in the browser, and the general router is logged in with this IP. Of course, there are not, you can check it yourself on the back of the router (it is usually marked).

Enter the administrator password and log in to the router. The image below shows the screen after logging in.

Click on the wireless settings and we can see all the options that can be set.

We click on the wireless host status and we can see the devices that are currently connected to the router.

Here are the key steps. Click [Wireless MAC Address Filter], and you will come to the MAC address list. As you can see in the image below, those are the list of MAC addresses that I added myself earlier.

Note at the back to make a difference, "Status:" We first select invalid, and finally take effect in the same selection. Then click Save.

Select the MAC address to allow connection, and then click [Specify entry to take effect].

<> wireless routers send signals across the board, and the closer the router is to obstacles, the more easily the signal is suppressed. Therefore, you should choose a high and spacious location in your home to place the router so that the signal can radiate downwards and reduce the blocking of obstacles and signal blind spots.

Routers transmit data information in the form of data packets. Electrical appliances, glass, and metal items will cause obvious interference to the signal, resulting in transmission blockage. Friends can keep the router away from the above categories of items to reduce interference.

1. If the router version is older, then regularly updating the firmware can ensure that the software of the router is in a good and efficient operating state.

2. If the wireless router at home has been used for too long, it will be a good choice to replace it with a new dual-antenna or multi-antenna router.

1. Buy a wifi repeater: plug the repeater into the socket at home, and the signal range and strength can be enhanced after debugging.

2. Reuse of old routers: Set the old router to AP mode, and then connect to the existing main router through the LAN port to expand the signal.

3. Adjust the antenna: Most router antennas are placed in a "ring", and in the vertical direction, the signal coverage will be wider. The antenna can be adjusted appropriately according to the distance and angle.

Usually the router is factory set to mixed mode with a set rate of 75%.

1. Adjust the rate: The partner can enter the security settings and adjust the rate of the router to the maximum.

2. Select Single Protocol: Set the mode to use only protocol.

Open the browser, enter the router address and username and password, check whether there is an unfamiliar device in the corresponding menu, and compare the IP address with your own hardware.

Then send the friends three magic weapons to prevent rubbing the net.

1. Set a complex password.

In the Tab or Security, select the WPA-PSK WPA2-PSK password and set a complex, easy-to-remember, and hard-to-guess password.

2. Disable the DHCP function.

In the Local Area Network (LAN) settings, disable the DHCP function to prevent automatic IP address assignment to wireless clients.

3. Change the default IP address.

If it defaults, it can be changed to prevent easy guessing.

Landlord,There is a wireless access control button under the basic wireless settings,You can add MAC address filtering in it,Only allow your own host and your approved mobile device to access MAC address。

In addition, it does not need to enter a password, you can scan *** to connect to wifi, simple and safe, and then, its biggest advantage is that it can support game users to receive game packages worth more than 100 yuan and enjoy the function of game acceleration.

Hope it helps.

Someone rubbing the net must be the first to give you a hint.,And then you can disconnect and stop it.,But I think it's better to find a security software that can prevent viruses and anti-phishing.,And anti-rubbing the net will be better.,It's new now.,I use the Hilianda safety net router.,The industry's first and computer manager security software has cooperation.,It feels very special.,Computer manager such security software itself anti-virus and anti-virus is not a problem.。

360 There is a diagnostic tool for anti-rubbing nets... Fool operation, absolutely reliable.

Located in the Traffic Firewall tool.

Just follow the prompts, it's very convenient.

Follow the steps below to set up that no one can crack it. As long as you put the router or broadband modem, set up to hide the SSID broadcast, no wireless device can search this network, and it is impossible to crack your network if you can't search the network.

However, you need to be aware that the network that was previously saved by the connection is invalid. Your own wireless device will need to manually add the network name (SSID) and password again. Otherwise, you won't be able to connect yourself, if you have the conditions, you can try it, and you will try it!

Hello, the wireless router is set up to prevent people from rubbing the network as follows:

1. Since the wireless router does not open the DHCP server by default in AP mode, it cannot automatically assign an IP address to the computer, so you need to configure the IP address of the computer's wireless network connection to log in to the management interface of the router. Set the IP address of the wireless network connection of the computer to the same and the subnet mask to :. After the setup is complete, click "OK" to take effect.

2. Default wireless network name of portable router: Since the router does not set wireless security, scan the wireless network in the environment, select the wireless SSID, and click "Connect".

3. Then enter " in the browser, enter the login username and password are admin, open the management interface, and automatically pop up the "Setup Wizard".

4. Then click "Next" to start the setting, and the working mode setting page will pop up.

5. Select "AP" and click "Next" to pop up the wireless settings page. You can set the name of the wireless network. To prevent unauthorized users from accessing the network, we recommend that you set wireless security and select WPA-PSK WPA2-PSK"and set your password.

6. Click "Next" to prompt that the device needs to be restarted, click Restart.

7. After the restart is completed, the wireless network of the router has been set up with wireless security, and the wireless network connection of the computer will be automatically disconnected, and the wireless network needs to be reconnected, and the wireless password needs to be entered during the connection process.

8. After the configuration is completed, please set the IP address of the wireless network connection to automatically obtain the IP address, click "OK" to take effect, and you can surf the Internet normally.

1.The best way to choose the WAP method for router encryption is WEP encryption, WEP encryption is currently very easy to crack, and you can crack your password in less than 10 minutes, and the WAP method can also be cracked.

But it is very troublesome to crack, if you set a more complex password, such as numbers + letters + symbols, it is very difficult to crack it.

2.Hide the SSID, in the settings of the wireless router, select "Hide SSID" or "Disable SSID Broadcasting". In this way, it is not easy to be searched by those who "rub the net".

3.Bind MAC address, set the MAC address of the computer that is known to be going to access the Internet through the wireless router in the router, so that the wireless router only allows the bound computer to connect.

4.Change the IP address and login password of the router and disable DHCP. Set your computer to a fixed IP, and then set a static route in the router, so that even if you crack the password, you can connect to the router, but you can't get the IP address and gateway to surf the Internet.

5.The combination of a variety of protective measures can make the net-rubbers retreat and give up the cracking, which greatly reduces the possibility of you being rubbed into the net.

To set up a wireless router to prevent network rubbing, you can enter the network card address of the access device in the settings, so that only the recorded device can be accessed. You can also make the password more complicated, a combination of English and numbers.

Set router parameters, set MAC address filtering, bind MAC addresses, prohibit guest logins, increase password complexity, hide wireless broadcasting, enable wireless access control, and prohibit device access from device management.

Set up intelligent networking with the operator modem and bind the password to the name.

Set a password or set a list of devices in the control panel.

Turn on the IP address of the router and log in there, there are settings inside. In other words, you can set up several people to go online, and you can see it clearly.

Setting up complex passwords (including numbers, uppercase and lowercase letters, and symbols) can generally prevent others from surfing the Internet.

The Gigabit enterprise router with PPPoE server distributes the network cable to the Gigabit switch, and then distributes the network cable to each room to connect to the wireless router.

Personal painstaking experience of wireless router purchase and use cheats.

The password setting is a little cumbersome, and it is best to use English + numbers.

Make the password more complicated and use the hexadecimal system.

It's okay to hide the wifi name so that others can't find your router signal.

As far as I know.

As long as there is the @ symbol when the password is set, it is difficult for others to crack it, and the other is to hide your wireless wireless when designing a wireless router, so that no one can find your signal.

It can only be searched by users who have already connected. Thank you.

Hide the broadcast and set a more complicated password.

Generally speaking, the more complex the password, the more difficult it is to crack, do not set pure numbers, which is easy to crack, should be set with numbers, letter case and special symbols of the password, so that it is more difficult to crack, in order to prevent illegal cracking of the connection, it is recommended.

Modify the SSID, and hide, so that others can't see your wireless route, and then enable MAC address filtering, non-allowed devices are forbidden to connect, so that no one else connects to your wireless router, don't know how to set it up and ask it.

You can change the login name and login password of the wireless router at the same time!