How about copper radiators, is it suitable for home use?

Not afraid of corrosion but more expensive copper radiator because it is not afraid of corrosion and has a higher service life and is chosen by many consumers, copper has good thermal conductivity, fast heat dissipation, high efficiency, easy room temperature control. In addition, the copper radiator is compact in shape, takes up little space, and is efficient and energy-saving.

The copper pipes and fittings of the radiator can still maintain their original shape and strength at high temperatures, and will not have long-term aging. Under conditions of high heat, high pressure, near fire and corrosion, there is no need to worry, you can rest assured. At present, the all-copper radiators are mostly bathroom type, that is, a row of copper pipes are welded at both ends with the joint box.

However, the biggest disadvantage of copper radiators is that they are relatively expensive, and some HVAC supermarkets no longer operate copper radiators.

Radiators are all copper, copper-aluminum composite, steel and cast iron radiators according to heat dissipation performance from high to low!

The all-copper radiator is the radiator with the highest thermal conductivity, and it is corrosion-resistant, has a long service life, and is the best radiator!

But ** is very high, and many of the self-proclaimed all-copper radiators on the market are fakes, not pure copper!

Therefore, although the copper radiator is the most suitable for home use, it is only suitable for the home of the local tyrant, not the home of the ordinary people!

The copper-aluminum composite radiator that has appeared in recent years is deceptive, and after a long period of use, the copper and aluminum are separated, and the thermal conductivity is getting worse and worse!

Although the steel heating package is cheap and beautiful in appearance, it is easy to be corroded, has a short service life, and is not cost-effective!

Therefore, it is suitable for home use or a new cast iron heating package, in addition to poor thermal conductivity, there are almost no shortcomings, and it is the most suitable for home use!

When decorating, many families will consider the heating of the bathroom, especially in the south, most people have installed bath bombs in their homes, but with the popularity of radiators. Many families have begun to struggle with what kind of heating should be used in the bathroom? If you install a bath bomb and then install a radiator, will it be a waste of duplication?

Let's follow the golden flagship flag brother to find out.

Bath bomb: The biggest advantage of bathroom bath bomb is that it is cheap, so it is also the main reason why many families choose to install it. But as far as heating is concerned, there are still many disadvantages of bath bombs.

Because the bath bomb is heated and dissipated in a high temperature local area, after opening, the windows need to be closed, and only the exhaust fan is turned on, so after a long time of use, the room will be stuffy and uncomfortable, and even make people feel suffocated. Since the heat dissipation of the bath bomb starts from the head, it is easy to get burned after a long time for taller and older people.

On the other hand, the infrared rays of the bath bomb belong to thermal radiation, which can easily cause damage to the eyes and eyes. Therefore, we must remind users who have bath bombs at home that when bathing children, do not let children look directly at bath bombs, otherwise it may cause permanent damage to children's future vision.

Bathroom radiators:

In contrast, bathroom radiators are much more gentle. Bathroom radiators can also be called radiator towel racks. The advantages of bathroom radiators are much more than those of bath bombs.

First of all, the bathroom radiator heats up quickly, and it is ready to use, and generally it can reach the predetermined temperature in half an hour. The operating principle of the bathroom radiator is the same as that of the ordinary radiator, so it will not cause damage to the human body. The most important point is that the current new bathroom radiators are designed with a shelf function, which can effectively prevent towels and other supplies from getting damp and moldy.

The size of the bathroom radiator needs to be selected according to the area of the family bathroom. Normally, 450*1000 bathroom radiators can be used for heating more than 4 flat bathrooms, while 450*1000 bathroom radiators can be used for more than 6 flat sanitary heating.

The larger the model, the larger the heating area**, the higher the radiator**, but it is much cheaper than other radiators. You can compare the area of your own bathroom to see what specifications of bathroom radiators are more suitable.

In fact, what kind of heating system to install in the bathroom depends on the heating method and living habits of the family. Through the comparison of the above-mentioned bath bombs and bathroom radiators, I believe that everyone has a basic choice for the choice of heating equipment in their own bathroom.

What material is durable for radiators: 1. Steel radiators. Features:

Light weight, high pressure, low production energy consumption and other advantages, beautiful appearance, more styles, more colors, full water maintenance can prolong the service life. However, it is worth noting that the steel radiator has high requirements for the water quality of the heating system, if it is easy to corrode in the unsafe heating system, the purchase of steel radiator must first understand whether it matches the heating system of the community, especially now that the heating water quality of some communities can not meet the standard. 2. Copper radiators.

Features: Not afraid of corrosion but more expensive. Copper radiators are chosen by many consumers because they are not afraid of corrosion and have a longer service life, copper has good thermal conductivity, fast heat dissipation, high efficiency, and is easy to control room temperature.

In addition, the copper radiator is compact in size, takes up little space, and is highly efficient and energy-saving. 3. Aluminum radiators. Features:

The heat dissipation is better, the energy saving is obvious, and the number of pieces used in aluminum is less than that used in steel. Aluminum has good resistance to oxidation and corrosion, and does not need to add any additives. However, if you are afraid of alkali corrosion, you should do a good job of internal corrosion.

4. Copper and aluminum composite radiators. Features: The advantage is that the ventilation parts and heat dissipation parts in the radiator are treated separately, and the corrosion resistance of copper and the characteristics of aluminum are light in weight, good thermal conductivity and easy molding.

The copper pipe is used as the water supply component, which has strong corrosion resistance, and can ensure that the service life is higher than that of the ordinary steel pipe used in the heating system; With the copper pipe as the water supply part, it can achieve a high pressure-bearing capacity and increase the working pressure of the radiator. Copper-aluminum composite radiator uses aluminum as a heat dissipation component, which has low density, easy molding, light weight, and is not afraid of corrosion, but has fewer styles, and the color is mainly white, which is easy to deform during long-distance transportation. 5. Cast iron radiator:

The most common radiator at home is purchased by most people due to its relatively low level and corrosion resistance. However, in recent years, China's new radiators have developed rapidly, and cast iron radiators have gradually failed to meet the requirements of the industry, and have been gradually eliminated due to their unattractive appearance, large volume and weight, and high production energy consumption. If it is suitable, choose steel, which is not expensive.

I have an Aini brand at home. **Varies by size, a group of several hundred dollars.

Radiator materials can be divided into six categories: cast iron radiators, aluminum alloy radiators, steel-aluminum composite radiators, steel radiators, copper-aluminum composite radiators, and pure copper radiators. So, what material is more durable for radiators? Let's follow the golden flagship flag brother to find out.

1.Steel radiator.

Advantages: stable quality, good thermal performance, high working pressure. It has a large water storage capacity and a good heat dissipation effect. Wall thickness, corrosion resistance, long service life.

Disadvantages: Under the condition that the heating water quality and operation management are not standardized, the radiator is easy to oxidize, corrode and leak, and needs to be maintained with full water.

Price point: Mid-range price point.

2.Steel-aluminum composite radiators.

Advantages: large water storage, good heat dissipation effect, light weight, beautiful spraying surface, rich and diverse forms, high strength, beautiful appearance, rich colors and shapes, and large room for choice. The surface is smooth and delicate, not easy to accumulate dirt, and easy to clean.

Small size and light weight. Strong load-bearing capacity. High heat dissipation efficiency, suitable for alkaline.

Disadvantages: The wall thickness is thinner than that of cast iron radiators, and if the water has high oxygen content, it is easy to corrode.

Price point: mid-to-high-end price range.

3.Aluminum alloy radiator.

Advantages: strong heat transfer ability, acid resistance, oxidation resistance. A wide range of colors and heights can be selected. Small size, light weight, high heat dissipation efficiency.

Disadvantages: thin wall, easy to alkali corrosion, leakage, have certain requirements for water quality. Due to material factors, the welding process is very demanding, and it is easy to leak. The surface is not smooth and fine enough, and the feel is rough, which has a certain impact on cleaning.

Price point: Mid-range price point.

4.Cast iron radiators.

Advantages: good thermal inertia, high mechanical strength, cheap and economical.

Disadvantages: rough and bulky appearance. Single color, height, and shape.

The surface is rough and prone to dust accumulation, making it difficult to clean. Low heat dissipation efficiency. Poor weight capacity.

The interface is prone to water leakage. Moreover, the production and manufacturing are not environmentally friendly, and the state no longer advocates the use of them.

Price point: low to mid range.

5.Pure copper radiators.

Advantages: strong thermal conductivity, good heat dissipation effect, corrosion resistance, long service life.

Disadvantages: high cost, difficult to transport, very low market share.

Price point: premium price point.

6.Copper-aluminum composite radiator.

Advantages: The copper-aluminum composite radiator overcomes the shortcomings of low pressure, low metal thermal strength and poor decorative performance of cast iron radiators, and also overcomes the weaknesses of poor corrosion resistance of steel radiators and other metal radiators, and reduces the trouble caused by excessive water quality requirements for the system. Corrosion resistance, long service life, good thermal conductivity, large heat dissipation, high efficiency and energy saving, and suitable for alkaline water heating needs.

Disadvantages: less water storage and short holding time.

Price point: mid-to-high-end price range.

Different radiator materials have different positioning, but also have their advantages and disadvantages, consumers can choose one of their needs according to the positioning of their radiator material.

Copper-aluminum composite radiators are more durable.

Radiator materials are divided into mild steel radiators, cast iron radiators, copper-aluminum composite radiators, cast aluminum radiators, electroplated stainless steel radiators, pure copper radiators, etc.

Mild steel radiators are more cost-effective, and the durability is only four or five years.

Cast iron radiators, which are too heavy in weight and unsightly, have a durability of about ten years.

Copper-aluminum composite radiator, beautiful appearance, a variety of styles, relatively high, but indeed durable, the manufacturer warranty of 20 years.

Electroplated stainless steel and pure copper radiators are generally used in small back baskets in the bathroom, which are mainly expensive and have high production requirements. The relative ** is also very high, and it is not suitable for large-scale use.

Cast aluminum radiators are relatively less used now, because the advantages in all aspects are not too prominent.

Overall, it is more durable to talk about durability or copper-aluminum composite radiators.

In fact, it is the cast iron radiator that used to be the most durable!

Dear Kiss I'm glad to answer for you, my answer is as follows: copper aluminum radiators are better. These two types of radiators, in terms of thermal conductivity, copper and aluminum radiators are better than mild steel radiators; In terms of compression resistance and ease of transportation, copper and aluminum radiators are slightly inferior to steel radiators; Therefore, the level of the two cannot be generalized.

In terms of heat dissipation, the copper-aluminum radiator made of copper tube aluminum profile is compared, because copper has good thermal conductivity, the heat is transferred to the aluminum profile for contact with air and heat dissipation; In addition, the copper aluminum radiator is a copper tube inside, and its water capacity is relatively large, although the hot water time is slower when the temperature rises, but the heat storage is relatively large, which is also a reason why it heats up quickly. In the steel radiator, the water capacity of the steel tube type is larger than that of the copper and aluminum radiator, and the heat capacity is also quite large, but its heat dissipation method is mainly radiation, so the heating time is slow, and the water resistance is also very large due to the large water capacity. However, in the steel plate radiator, its sink is relatively small and the water capacity is relatively small, so the hot water circulation is very uniform; In addition, there are heat exchange fins inside the radiator, which increases the contact area with the indoor cold air, and will allow the indoor air to circulate and heat, which is mainly convection or radiation, so the water resistance it brings is small, the temperature rises very quickly, and it is the most comfortable compared to the steel tubular radiator.

Hello, Rubens radiators answer for you, both of these radiators are the most commonly used materials in the market now, each with its own benefits.

The steel radiator radiates heat dissipation, heats up immediately once opened**, has a large water capacity, a long holding time, is suitable for central heating, and is more cost-effective. The copper-aluminum composite radiator is made of copper tube with anti-oxidation and corrosion resistance and aluminum wing with excellent heat dissipation effect, the strong combination of the two materials, good heat dissipation, rapid heating, strong corrosion resistance, and longer service life, because it is inner copper and outer aluminum, it is also relatively more expensive.

However, it also reminds you that steel radiators have certain requirements for water quality, and where the water quality is not good, try to buy copper and aluminum composite radiators. Hope it helps.

Which material is good for ordinary household radiators, the most common material on the market, steel radiators or copper-aluminum composite radiators, which one is more suitable for home decoration. We often encounter such problems, but in the eyes of professionals, which material radiator is very good, are suitable for home heating, but different families, different conditions are different.

Steel radiators and copper-aluminum composite radiators, including steel-aluminum composite radiators commonly used in large-scale factory projects, are representatives of new types of radiators. Household use of our common steel and copper-aluminum composites.

Copper-aluminum composite radiator: corrosion-resistant, novel and beautiful style, lightweight, and fast heat dissipation; **Higher, low hardness.

Low carbon steel: beautiful and generous, affordable, large water storage, good thermal insulation performance, pressure resistance; It is easy to be corroded by oxidation.

If it is central heating, choose steel, central heating is intermittent heating (burn for a while and stop for a while), the water storage of steel is larger than that of copper and aluminum, when the heating stops heating, the larger the water storage of the heating system, the longer the heat preservation time.

Self-heating is self-burning, when the temperature reaches a certain level, the heating will not burn, the wall thickness of copper and aluminum is thin, the heat dissipation is fast, it is more energy-saving, and the corrosion resistance is good.

Household radiators not only look at the material, but also look at the brand, and the brand is the guarantee of quality.