I would like to ask, can the concrete pavement that has been sanded also be treated with ground curi

No, you cannot.

Concrete pavement sand sand should use special pavement sand repair materials, such as: Guheng cement pavement sand treatment agent, the repair effect is good, and the repair cost is low.

If the cement floor is sanded, it can be treated with the cement floor sand treatment agent. At present, most of the concrete sealing curing agents A and C are used in China. Nalut A and C agents are also known as cement floor sand treatment agents.

The effect of Nalut cement floor sanding treatment agent is very good.

Product analysis. Concrete pavement curing and sanding treatment agent is a kind of wear-resistant hardener for new and old concrete pavement, which is colorless, odorless, non-toxic and non-combustible. Through effective penetration (5-8mm depth), a deep chemical reaction occurs with the chemical composition in the concrete.

The individual components in the concrete are solidified into a solid solid, resulting in a more wear-resistant surface and permanently avoiding the precipitation of concrete dust from the surface voids. Concrete pavement curing and sanding treatment agent can be used for new and old concrete floors to increase their wear resistance, chamber surface, dustproof, and improve maintenance conditions.

Yes, I also do engineering, the ground curing agent is a material that can be suitable for the use of new and old concrete pavement, I know that the ground curing agent of Jinzhu is very good.

Yes, but the effect is not particularly good, because the curing agent will lose its strength once it is soaked in water, which can be proved by experiments. In fact, concrete pavement can be used with Guheng cement pavement sand treatment agent, which is upgraded on the basis of the curing agent formula, and is specially developed for concrete pavement sand sand repair materials.

Summary. c. Theoretical painting area: 60-70 square meters.

Cement Floor Curing Agent - Function Industrial cement floor curing agent mainly solves the products produced by the aging of cement floor, sand and dust. Laying industrial ground curing agent on the cement floor can solidify and strengthen the cement soil, improve the strength and hardness of the cement soil, and make the ground more wear-resistant. The product is generally referred to as:

Concrete sealing curing agent, cement floor hardener. The compounds that penetrate into the concrete and the semi-hydrated cement, free calcium, silicon oxide and other substances contained in the condensed concrete go through a series of complex chemical reactions to produce hard substances, which will eventually improve the compactness of the concrete surface, thereby improving the strength, hardness, wear resistance, impermeability and other indicators of the concrete surface.

Dear, hello I am very happy to serve you, yes, the ground sand curing agent is the cement floor dust and sand treatment agent

Cement floor curing agent, referred to as ground solid, is made of imported polymer through multiple processes, polymer can penetrate the cement floor, firmly block the loose particles of the cement floor, so that the ground forms a tight one, which is convenient for the close combination of decorative materials and the ground, and effectively prevents the hollowing of the floor tiles. The gold casting curing agent is suitable for the hardening treatment of the curved surface of the cement floor in the early stage of home decoration or engineering decoration, which can effectively avoid the dust particles of the cement floor adhering to the working surface in the subsequent construction process, so as to improve the quality of batch scraping putty and latex paint. The ground is water-resistant and moisture-proof, which can avoid the deformation of the wooden floor due to moisture erosion.

It does not contain harmful substances such as formaldehyde, and is a green and environmentally friendly product that is harmless to the human body. 1. Construction requirements a, clean the cement floor before using the stool. b. Sprinkle a small amount of water to moisten the wet ground.

c. Roller brush or brush, apply twice at an interval of 1 hour.

c. Theoretical painting area: 60-70 square meters. Cement Floor Curing Agent - Function Industrial cement floor curing agent mainly solves the products produced by the aging of the mud ground and the sand and dust of the water tourism track.

Laying industrial ground curing agent on the cement floor of Qianzhenxiang can solidify and strengthen the cement soil, improve the strength and hardness of the cement soil, and make the ground more wear-resistant. The products are generally known as: concrete sealing curing agent, cement floor hardener.

The compounds that penetrate into the concrete and the semi-hydrated cement, free calcium, silicon oxide and other substances contained in the condensed concrete go through a series of complex chemical reactions to produce hard substances, which will eventually improve the compactness of the concrete surface, thereby improving the strength, hardness, wear resistance, impermeability and other indicators of the concrete surface.

Sand on concrete floor is also one of the common quality problems in ground construction. In general, the concrete gradation is unreasonable, and it needs to be reasonably adjusted after laboratory experiments. Another reason is that the curing time is too short after the concrete is poured or the curing method is improper.

The treatment method is to maintain according to the specification.

Regarding the use of hardeners, in general, try not to use hardeners, because it is a way to promote the rapid increase in the strength of concrete, and it is not as good as the natural increase in the strength of concrete. Hope mine is helpful to you.

The premise of doing it is actually better to grind off the sanding part, otherwise, the effect will be affected. It's better to do than not to be stronger. The most authentic thing is that the sandblasting machine sprays off the soft layer, or grinds off the soft layer, and then hardens or curing agent, or coats.

Don't pay attention to it, use it for two more years, sweep it, use it and use it.

The sanding of the concrete floor is likely to be caused by relatively large sand particles or more sand.

Cement floor sand treatment agent is a kind of product specially for cement floor sand and floor sand and dust, which is convenient and fast to construct and can effectively solve the problem of sand and dust on cement floor.

1. Clean the ground: Use professional dust pushing tools to clean the garbage and floating ash on the ground, pay attention to the ventilation of the construction environment, and keep the ground dry.

2. Local repair: For the damaged ground, it is necessary to cooperate with Deligu repair agent for local repair.

3. Dilute the cement floor sanding treatment agent and water in the ratio of 1:(4 5), spray or roll coat it on the ground, and keep it infiltrated for 2 3 hours, during which the material is dragged manually or mechanically to help penetrate to ensure the penetration depth and full reaction of the cement floor sanding treatment agent.

4. After the soaking time reaches the requirements, use a wet mop to wipe off the residual cement floor sanding treatment agent on the surface, and the construction can be ended.

5. On the surface of the floor with loose and porous pores, it is necessary to repeat the operation 1 time, or even 2 times. To repeat the operation, the two operations must be performed consecutively and the ground must not dry out during the two consecutive operations.

Hello kiss cement floor sand and ash with sealing curing agent Oh The ground ash and sand peeling is not wear-resistant, which is the beginning stage of concrete lesions, at this time, the timely use of Nalute concrete sealing curing agent for curing treatment can completely restore the health of the concrete floor. Concrete sealing curing agent is a kind of water health material that can be used for the construction of both new and old grounds, which is suitable for indoor and outdoor hard, wear-resistant ground, and can play a good role in dust-proof, sand-proof, wear-resistant, durable and water-resistant. Hope the above helps you have a happy life!

If you're happy with me, please give me a thumbs up (rate in the bottom left corner) Your work is very important to me, <>

Cement floor is very common in our lives, with the rapid development of science and technology, now many people in order to make the cement floor more beautiful, will use some special processing methods, such as brushing a layer of curing agent. So, is it okay for the curing agent to brush the cement floor directly? What do I need to pay attention to when using concrete sealant curing agent?

Let's take you to find out.

Yes, but it should be carried out after the cement construction is completed, so that it can have the corresponding effect. After the cement surface is brushed with the curing agent, it will not only be better for wear resistance, but also for dustproof, and the surface will not look so rough and smoother. In addition, brushing the hardener on the concrete floor is also easier to clean.

Precautions for using concrete sealing curing agents.

1. Finished product protection.

When the ground is under construction, most of the finished products on the site have been installed in place, so when using the curing agent, it is necessary to take protective measures for the finished products on the site. In order to avoid damage to these finished products by large-scale construction equipment during the construction process, the wall can be protected with a protective film, and the items that cannot be moved are protected by covering.

2. Clean the floor.

The ground must be cleaned before the curing agent is used, because its cleanliness has a great impact on the effect of subsequent construction. The oil stain on the ground can be cleaned with detergent, if the pollution is serious, it can be removed by burning alcohol, and the gap in the ground can be repaired with cement.

3. Construction environment.

When the curing agent is constructed, it is necessary to pay attention to the construction environment, and its temperature is best controlled between 5-35. Temperatures below this level will affect the permeability of the material. However, if the temperature is too high, the material will evaporate, which is not conducive to the construction of the curing agent.

Article summary: The above is all about whether it is okay to brush the cement floor directly with the curing agent and what needs to be paid attention to when using the concrete sealing curing agent, I hope it will be helpful to you. If you want to know more about it, please stay tuned to Qeeka Home.