What happens if you add too much oil, what is the driving experience?

The amount of oil will affect the driving experience, if you add more, it will lead to a power experience is not very good, you should pay attention to it when maintaining, check the oil level in the middle line of the cold car on the position, the liquid level is normal, there is no problem with normal maintenance, the rest is to see the quality of the oil, the original engine oil used before is not easy to use, the fuel consumption is high, I changed to GT Magic Red oil, the quality is very good, it is the base oil of the four types of PAO, long-term and durable, I changed it twice and obviously felt that the car was driving much smoother, With oh good also down a look, the experience is still very good.

1. If the engine oil is added too much, the difference will cause the engine to decrease in power and increase in fuel consumption.

2. When adding oil, be sure to make sure that the oil level is between the min scale and the max scale of the oil dipstick, only in this way. If the oil level is lower than the min scale, it will lead to poor lubrication of the engine, which will aggravate the wear of the engine. If the oil level is higher than the MAX scale, it will increase the running resistance of the engine, which will lead to a decrease in engine power and an increase in fuel consumption, and may also damage the three-way catalytic converter.

3. When adding engine oil, if you add more, you can pull out a little or release a little. Engine oil is known as the blood of the engine, and the oil plays the role of lubrication, cleaning, sealing, heat dissipation, buffering, rust prevention and rock crust in the engine. If there is no oil in the engine, the engine will not work properly.

4. The engine oil needs to be changed regularly, if the oil is not changed for a long time, the lubrication performance of the engine oil will deteriorate, which will aggravate the wear of the engine. If the oil is not changed for a long time, the oil will also oxidize and deteriorate, which will also aggravate the wear and tear of the engine. The oil filter needs to be replaced every time you change the oil.

The oil filter cartridge filters the oil, which keeps the oil clean.

In the case of too much oil, it will cause the various parts of the engine to stir violently when working, which will not only aggravate the loss of power inside the engine, but also increase the amount of oil splashed on the cylinder wall, resulting in the failure of burning oil. Therefore, car owners should always pay attention to the oil warning light on the dashboard, and the oil should not be too much.

2. Excessive oil increases fuel consumption.

When the oil in the engine block is too full, it will cause greater unnecessary resistance to the rotating work of the crankshaft, which in turn will affect the power output and lead to increased fuel consumption. It may also worsen the exhaust emissions, seriously affect the life of the three-way catalytic converter, and may even directly damage the three-way catalytic converter.

3. Too much oil can cause blue smoke from the engine exhaust pipe.

Too much oil, the rapid movement of the crankshaft shank and the large end of the connecting rod will inevitably lead to oil splashing, and a large amount of splashed oil will enter the combustion chamber to burn, causing blue smoke from the exhaust pipe, that is, "burning oil". It will also lead to a decrease in the gas volume of the crankcase, an increase in pressure, and an increase in oil seals.

4. Too little oil leads to poor lubrication.

For vehicle engines, oil is indispensable. When the oil in the engine oil pan is insufficient, the friction between the bearing and the shaft journal and other components will lead to poor lubrication due to insufficient oil, aggravate the wear of various parts of the engine, and even cause the burning of the shaft accident.

It can be seen that too little or too much oil is not beneficial to the engine, and the oil in the engine oil pan should be controlled between the upper and lower lines of the dipstick. Car owners and friends must pay attention to this aspect of the problem, for the good operation of the car engine, but also for their own driving safety.

What happens if you add too much oil? (Exceeding the upper limit) the power decreases and the fuel consumption increases. The car oil at the bottom of the cylinder does not touch the engine crankshaft, the car oil meets the engine crankshaft, it indicates that the car oil is too much, the engine crankshaft is to rely on the car oil lubricating oil, but not by touch moisturizing, its lubrication is maintained by the working pressure oil given by the fuel injection pump.

If there is too much automobile oil in the automobile engine, and most or all of the engine crankshaft is soaked in lubricating oil, the obstruction force of automobile oil to it will expand, and the opening to the outside world will be that the automobile engine will run sullenly and the running friction resistance will expand.

This is like a smuggling car with a driving force to push the rotation, originally did not touch the water, turned very happy, the conclusion fell and the water rose, then now that it touches the water, the friction resistance of the sand Chang will expand, not to mention that the car oil may have a certain viscosity. The frictional resistance of the engine crankshaft increases, the driving force is reduced, and then the computer operating system of the automobile engine will automatically let the vehicle multi-oil pump to improve the power, of course, the fuel consumption is high, the conclusion is to affect the driving force export, and increase the fuel consumption.

Accelerating the cause of carbon deposit, if the car oil is added too much, it will be everywhere all kinds of infiltration, the most stray cake is to flow into the engine combustion chamber of the car engine, which is equivalent to saying that it is burned with car gasoline, and the long-term engine oil burning will cause carbon deposit, and the carbon deposit in the engine combustion chamber will increase, and the vehicle will have carbon deposit, the driving force will be reduced, and the fuel consumption will rise.

It is very likely to destroy the three-way catalytic converter, because the amount of automobile oil entering the cylinder increases, so that the exhaust emissions become vicious, affecting the service life of the three-way catalytic converter, and the three-way catalytic converter may be destroyed in serious cases. Accelerate the aging of auto parts, some car series due to the air intake system in the car oil too much, will cause each component to bear the economic burden and work pressure is particularly large, the greater the work pressure, the faster the aging of various components in the vehicle. The more prominent is the crankcase ventilation seal, the higher its burden, the more it will accelerate aging, and it is very likely to cause the risk of automobile oil leakage after aging.

The impact of too much oil on the car: 1. More oil will have a greater resistance to the operation of the components inside the engine, which will lead to poor power response and power decrease, and then the sound of the engine will become louder, which will also increase fuel consumption to a certain extent. 2. If the engine oil is added too much, it will enter the combustion chamber, which will increase the carbon deposit in the combustion chamber, resulting in the occurrence of the phenomenon of burning engine oil, and the exhaust pipe will emit blue smoke.

If the oil is not burned sufficiently, the exhaust gas will be discharged from the exhaust pipe, resulting in excessive exhaust emissions. 3. If the oil is added more, the oil pressure will become higher, which will damage the oil seal, reduce the life of the oil seal, and there may be oil leakage.

The effects of adding more oil to a car are as follows:1When the engine is working, the individual parts will shake.

2.Too much oil can reduce engine power output. When the engine is working, the crankshaft shank and the big end of the connecting rod will move rapidly, and when there is too much oil, the crankshaft shank and connecting rod will produce violent agitation.

3.It will increase the amount of oil splashed on the cylinder wall, resulting in a burn-out oil failure. 4.

It will create resistance to the rotation of the crankshaft. 5.Reduced oil seal life, resulting in engine oil leakage.

6.It worsens the exhaust emissions and affects the life of the three-way catalytic converter.