How to create a wireless network with a laptop s network for touch4

You can get it, but XP's is not very easy to get Win7 is simple to operate (high success rate) is to use your laptop to build a WiFi hotspot on the line Specific operation you search online That's what we did.

1. Run the command prompt as an administrator

The shortcut key win+r enters cmd and enters.

2. Enable and set the virtual wifi network card

Run the command: netsh wlan set hostednetwork mode=allow ssid=mywifi key=12345678

This command has three parameters, mode: whether to enable the virtual wifi network card, change to disallow is disabled.

SSID: The name of the wireless network, preferably in English (take mywifi as an example).

key: Wi-Fi password, more than 8 characters (take 12345678 as an example).

The above three parameters can be used separately, for example, only mode=disallow can be used to disable the virtual WiFi network card directly.

2. After it is successfully enabled, there will be an additional wireless connection with the network card "Microsoft Virtual WiFi Miniport Adapter" in the network connection. If not, just update the wireless network card driver and you're good to go.

3. Set up Internet connection sharing

In the "Network Connections" window, right-click on the network connection that is connected to the Internet, select "Properties" "Sharing", and tick "Allow Others..." Connect (n)" and select "Virtual WiFi".

Once confirmed, the word "Shared" will appear next to the NIC icon that provides sharing, indicating that the "Broadband Connection" has been shared to "Virtual WiFi".

4. Turn on the wireless network

Continue running in the command prompt: netsh wlan start hostednetwork

Change start to stop to turn off the wireless network, and then you only need to run this command again to enable the wireless network after booting up).

At this point, the red cross of virtual wifi has disappeared, and the wifi base station has been formed. Laptops, mobile phones with wifi modules and other handsets can search for the wireless network mywifi, enter the password 12345678, and you can share the Internet!

The notebook itself does not have a wireless AP function, so it basically can't achieve what you said. It is recommended that you add a wireless router to try it.

Wireless Internet access is possible. The specific steps are:

1. First you connect the desktop and the wireless router with a network cable.

2. Plug in the wireless router power supply and turn on the switch.

3. Enter ** on the desktop, and fill in the password and user name admin (generally like this).

4. Enter the main page of wireless router settings, use the setup wizard to set up the network connection mode according to your Internet access method, and the next step is until it is completed. (Mine is broadband dial-up Internet access, fill in the username and password to connect.) ）

5. On the management page of the wireless router, you need to enter the wireless function setting bookmark to confirm that the wireless has been turned on. You can also set a password for Wi-Fi. Once you're done, click "Save".

Usually, the router will reboot at this time. At this point, the wireless network is set up.

6, the following should be set touch4 end, enter Apple's main page of the --Settings--Wireless LAN--Open (after opening, search for your wireless router hotspot, click on your router, enter the password, and finish), and confirm that the airplane mode is turned off. As long as you are within the effective range, you can generally achieve Internet access.

Does it mean that the desktop is connected to the Internet via Wi-Fi, yes, ,