Is there any way to tighten the wire and just align it to the shape?

Is there any way to align the shape of the screw just after tightening, I think you can align the direction when you screw it, so that after the screw has a certificate, the screw is just aligned with the shape.

The best way is to tighten the screws according to his regulations, or you can tighten the screws first and see if they can be in the right position, if it is exceeded, add a gasket.

If the screw is screwed after uh to uh the owner condition then of course it can change its specific shape of an upgrade.

If you can't align the hole when the screw is tightened, then it won't be able to be screwed in, so you can try a few more times, and you can screw it in after aligning it up and down, left and right, and align the shape.

If you want to tighten the screws just right to align the shape, it is recommended to find a professional engineer to do it for you, it may be more difficult to do it yourself.

There's no need to align the shape, just tighten the screw so that it doesn't come loose.

This requires alignment and many attempts to better tighten the screws and align them just right.

If this happens, you'll have to twist it a few more times to know how to align it.

Is there any way to align the shape just after the screw is tightened, this should be normal after the screw is screwed to align the shape, because this is how it is set at the factory, alas.

I think it's best if you pre-4G good Ross is where you are, and then when you get in you're definitely able to exit the ordinary.

Screws are usually tightened to the right and loosened to the left. That is, it is tight clockwise and loose counterclockwise. Most of the screws are positive buckle screws, and the positive buckle screws follow the right-hand rule, that is, the right hand clenches the fist and the thumb is extended, and the screw rotates in the direction of the four fingers, and at the same time travels in the direction of the thumb.

In addition, there are a few screws that are tight on the left and loose on the right. <

Screws are usually tightened to the right and loosened to the left. That is, it is tight clockwise and loose counterclockwise. Most of the screws are positive buckle screws, and the positive buckle screws follow the right-hand rule, that is, the right hand clenches the fist and the thumb is extended, and the screw rotates in the direction of the four fingers, and at the same time travels in the direction of the thumb.

In addition, there are a few screws that are tight on the left and loose on the right.

How to unscrew very tight screws:

1. Hit the screw a few times with a hammer, and the general screw trace hail rent will be loosened at this time.

2. Spray the screw loosening liquid, which can loosen the rusty screw, so as to unscrew the screw.

3. Clamp the screw head with vigorous pliers, and get it done with a gentle board.

4. The heat gun heats the posture, the principle of hot expansion and cold contraction, and the screw gap becomes larger, which can be unscrewed.

5. Use a macaroni flat-mouth screwdriver to aim at the right side of the nut, and then hit it with a hammer, which is equivalent to screwing counterclockwise, and the effect is quite good.

How to unscrew very tight screws:

1. Hit the screw a few times with a hammer, and the screw will generally be loosened by the shock.

2. Spraying screw loosening liquid can loosen the rusty screws and make them noisy, so as to unscrew the screws.

3. Clamp the screw head with vigorous pliers, and get it with a light board.

4. The heat gun is heated, the principle of hot expansion and cold contraction, the screw gap becomes larger, and it can be unscrewed.

5. Use a macaroni flat-mouth screwdriver to aim at the right side of the nut, and then hit it with a hammer, which is equivalent to screwing counterclockwise, and the effect is quite good.

Twist the screw in a counterclockwise direction and the screw will loosen. To put it simply, tightening to the left is loose, and tightening to the right is tight. That is, it is tight clockwise and loose counterclockwise.

The screw is a tool that uses the physical and mathematical principles of the inclined circular rotation of the object and the friction to carry the force of the object, and gradually fastens the mechanical parts of the object.

The function of the screw is mainly to connect the two workpieces together and play the role of fastening. Screws are an indispensable industrial necessity in daily life.

For example, very small screws used in cameras, glasses, clocks, electronics, etc. General screws for televisions, electrical products, musical instruments, furniture, etc.

The screw is a common invention in people's production and life for thousands of years, and it is the first major invention of mankind according to the application field.

It depends. Usually the screws follow the right-hand rule, that is, if you tighten it counterclockwise, you will loosen it, and if you tighten it clockwise, you will tighten it. However, there are some special objects that are the opposite, such as the screws of car tires are tightened counterclockwise, and loosened clockwise.

A screw is a tool that uses the physical and mathematical principles of the oblique circular rotation and friction of an object to tighten the mechanical parts of the object step by step. <

It depends. Usually the screws follow the right-hand rule, that is, if you tighten it counterclockwise, you will loosen it, and if you tighten it clockwise, you will tighten it. However, there are some special objects that are the opposite, such as the screws of car tires are tightened counterclockwise, and loosened clockwise.

A screw is a tool that uses the physical and mathematical principles of the oblique circular rotation and friction of an object to tighten the mechanical parts of the object step by step.

1. Pat the thing in reverse, and after the dust in the screw hole is patted out, there will be a gap in the hole, and the screw will be loosened, and then use a screwdriver to screw it.

2. Choose a suitable screwdriver or wrench, and drop a few drops of lubricating oil in the gap between the screws, which will make it easier to tighten the screws.

3. You can use fire to heat the screw, and then hit it appropriately, and you can screw it off.

How to unscrew a very tight screw, the screw installation is very suitable, but it is difficult to unscrew, so how to unscrew the screw that is very tight?

First, first use a hammer to knock the screw a few times, the screw will generally be shaken loose, and it is easy to unscrew it at this time; 2. Buy a bottle of screw loosening liquid and spray a little on the screw, which can loosen the rusty screw, and then you can unscrew the screw;

3. Clamp the screw head with vigorous pliers, and then pull it lightly; Fourth, buy a heat gun to heat the screws, and use the principle of thermal expansion and cold contraction to make the screw gap larger, and you can unscrew it;

If the screw cap has been spent, it is difficult to twist it with a screwdriver, at this time find a wide rubber band to cover the screw, and hold the rubber band with two fingers to fix it;

Then use a screwdriver suitable for the size of the screw to insert it into the screw mouth, remember to be sure to use the screwdriver to press the rubber band hard, it is best to make the screwdriver embedded in the rubber band, so as to increase the friction, and then quickly turn the screwdriver, you can easily unscrew the screw.