The blue screen 0x00000122 boot

1.Start with the software, if running the software causes an error, it is recommended to reinstall the software, which can generally be solved.

2.Consider whether other software is running at the same time, causing conflicts, or if the host configuration memory is too small, resulting in memory overflow or exhaustion (for example, if the XP system is used, it is recommended to configure more than 512MB memory or 512MB).

3.Check whether the driver or BIOS has been reinstalled or upgraded recently, then it is likely to be caused by driver incompatibility, just uninstall and reinstall the original driver.

4.If you exclude the first three points, you can basically tell you that it is unfortunate! It's probably a hardware issue. To determine whether it is a hardware failure, it is recommended to format the hard disk, reinstall the system, see if it is normal, and rule out viruses and system-related faults!

5.Hardware problems, I explained above, mainly check the memory, check whether the memory metal strip is oxidized, if more than two memory are installed, remove one or change the memory slot. Other motherboards, power supplies, heat dissipation, etc.

0x00000024 blue screen won't turn on hello dear,!"The first step, we will start the computer, when the startup page is about to appear, press F8 to enter the boot menu options page, you can try to enter the "safe mode" to repair. If the input is successful, the problem with the blue screen may be due to some programs or drivers installed, as long as it can be restored after we uninstall the last program or driver installed.

2.If the above methods are useless, then you need to use the PE system to start the U disk to help us, enter the PE, we first scan the hard disk, if it is checked that the hard disk is faulty, it is recommended to replace, if it is still under warranty, return directly to the original factory warranty replacement. 3.

Is your laptop CPU overclocked? Down.

0x00000124

Error analysis: 0x00000023 usually occurs when reading and writing a system partition of a FAT16 or FAT32 file system, while 0x00000124 is due to a file error (the purpose of this drive file is to allow the system to read and write disks that use the NTFS file system).These two BSOD errors are most likely caused by physical damage to the disk itself, or by corrupted Interrupt Requirement Packet (IRP).

Other reasons include: too much fragmentation of the hard disk; File reads and writes are too frequent, and the amount of data is very large or caused by some disk mirroring software or anti-virus software.

stop:0x00000024

Common causes of this blue screen: Severe drive fragmentation, overloaded files, errors in third party drive mirroring software or some antivirus software.

1.Disable some antivirus software or backup programs, and disable all defragmentation applications.

2.Run chkdsk f to service the hard drive and restart the computer.

3.Restart your computer. At the boot screen, press F8 to enter "Advanced Boot Options" and select "Last Correct Configuration".

Error name 0x00000024: ntfs file system

Failure analysis 0x00000024 error indicates that a disk drive with the NTFS file system is experiencing a problem. This error is usually caused by a faulty disk drive itself, and is triggered for much the same reason as 0x00000023 error. If you encounter 0x00000024 error, you can refer to the solution to 0x00000023 error.

When checking the system files, check if the %systemroot% system32 drivers are corrupted or missing.

0x00000024:ntfs_file_system

Error analysis: 0x00000024 is due to a file error (the purpose of this drive file is to allow the system to read and write disks that use the NTFS file system).This BSOD error is most likely caused by physical damage to the disk itself, or by a corrupted Interrupt Requirement Packet (IRP).

Other reasons include: too much fragmentation of the hard disk; File reads and writes are too frequent, and the amount of data is very large or caused by some disk mirroring software or anti-virus software.

Solution: Step 1: Start by opening the command line prompt and run"chkdsk /r"Command to check and fix hard disk errors. If you report the presence of bad tracks, use the inspection tool provided by the hard drive manufacturer to check and fix them.

Step 2: Then disable all software that scans files, such as anti-virus software, firewalls, or backup tools.

Step 3: Right-click on the C: Winnt System32 Drivers file and select it"attributes"to check whether the version matches the version of Windows used by the current system.

Note: If it is XP, it should be C: Windows System32

drivers\

Step 4: Install the latest motherboard drivers, especially IDE drivers. If you have drivers for your optical drives and removable storage, it's a good idea to upgrade them to the latest version.

If none of the above solutions can solve the blue screen issue. It cannot be repaired in safe mode. Please troubleshoot the hardware after troubleshooting. Use a system backup to restore the system or completely reinstall the operating system.

1. Start the computer first, press the "F8" shortcut key on the keyboard when the system boot screen is about to appear, enter the boot menu option, and try to enter the "safe mode". If you enter successfully, then the blue screen problem may be caused by the installation of some programs or drivers, uninstall the last program or driver installed before the failure and restart the system, you should be able to enter normally.

After starting the computer with the system installation CD, transfer the important files of the C drive, and then reinstall the system, some installation CD can be anti-virus, there are anti-virus tools. Some have tools to move important files from the C drive to the D drive before reinstalling, and you can see that there is this tool on the installation CD.

With a PE disk, enter the PE system and start running CHKDSK

After scanning the C drive, you can solve the blue screen into XP

Dear landlord, I hope my method works for you, our home computer also has a blue screen, and every time I fix it like this:

Force shutdown. The boot will appear to let you choose something (the mess of the secure login) at this time, pay attention to the quick selection of the latest correct configuration on the security login (it doesn't seem to be the name, but you can see it when you get there, it's to restore what mess) has a time limit.

File corruption, fixed with 360 vulnerability.