Why does formaldehyde exceed the standard in the new car I just bought? How do you remove formaldehy

This is because a lot of dyes and coatings will be used in the production of cars, and a lot of adhesives and glues will be used, and the saddle mats will release formaldehyde, so it will lead to excessive formaldehyde; You can put some activated carbon in the car, you can also put some grapefruit peel, you can spray some air freshener, and you can also open more doors and windows, which can effectively remove formaldehyde.

Formaldehyde and other substances in decorative materials are not "absorbed" by anything, and they will only accelerate their volatilization rate as the temperature rises. Therefore, in addition to more sun, more windows to blow, other methods have little effect. A good habit of driving, open all the windows when you get in the car, and close them after starting and running for a while.

Because there is plastic in the new car, and there are a lot of leather products, a lot of glue will be used in the production process, so there will be formaldehyde, often closed, formaldehyde exceeds the standard, you can open the window, open the sunroof, and then you can put activated carbon in the car, you can put lemon, you can also ask a professional formaldehyde removal company to remove formaldehyde.

It may not have been eliminated well, or it may be that the materials are new, so the formaldehyde will be exceeded, and the windows should be opened frequently for ventilation, and some pothos or activated carbon should be put in the car.

How can the formaldehyde concentration in the new car I just bought exceed the standard? How do you remove formaldehyde?

The smell of indoor formaldehyde is not big, the smell in the car is mainly released by other chemicals, such as benzene, xylene, toluene, etc., this component is also very toxic to the body, but they are very easy to evaporate, under the premise of good air circulation, it can evaporate for many months, and the smell in the car will be screaming. And indoor formaldehyde you think it's gone, in fact it still exists, silently damaging our body.

Many people think that indoor formaldehyde is released from the building decoration materials in the car, but it is not. The sound insulation, noise reduction and vibration damping raw materials on the chassis of the car are the main culprits of the large indoor formaldehyde in the car. It was paved under the wooden floor of the trunk, so you couldn't see it.

The previous vehicle manufacturing cost was high, and this raw material was more energy-saving and environmentally friendly; Nowadays, the manufacturing cost of vehicles has dropped sharply, and many low-end cars use poor information, such as replacing the sound-absorbing cotton for environmental protection with bitumen, which makes the formaldehyde content in the car skyrocket, and the cycle time of indoor formaldehyde release has increased significantly. If you want to completely remove formaldehyde, the best way is to replace this raw material with environmental protection, but this bill of quantities is huge, and the cost is very high, and it is almost impossible to succeed.

Although it is not possible to completely remove it, there are always ways to mitigate the damage. The best way is to ventilate and reduce the concentration of pollutants in the car, so that the harmful substances can evaporate as soon as possible. You can choose sunny weather, transfer the car to the suburbs and park it in the sun, open any aluminum alloy doors and windows, under the exposure of the sun, this pollutant will evaporate faster, and the duration should be as long as possible.

Do that a few more times, and you'll notice the smell of the car screaming. In daily driving, it is best to open the window to ventilate the car to prevent the concentration of pollutants in the car from being too high.

In fact, the most essential way to deal with environmental pollution in the car is to use energy-saving and environmentally friendly raw materials. However, at this stage, there is no corresponding regulation for environmental pollution in the car in China, and some automobile manufacturers use which one is cost-effective in order to better control the cost. In Europe and the United States, there are strict testing standards for pollutant substances in cars, and automobile manufacturers do not dare to use fake and shoddy raw materials, so the smell in the car is relatively small, such as our Charron, Germany's Volvo.

For example, Beijing Benz also used fake and shoddy raw materials for interior trim products, resulting in a huge smell in the car, and customers reported to the State Food and Drug Administration, and they gritted their teeth and refused to admit it. **Mercedes-Benz is like this, not to mention other car series, such as Ford Mondeo, Nissan Sylphy, these are all endless. Relatively speaking, French cars are better or better, and the smell in the car can be smaller, and it is not clear what the real reason is.

1. You can put some.

Bai grapefruit peel or orange duzi peel, these fruits are coarse fiber dao wei fruits, it back to their skin gaps are very large, can answer a good adsorption of formaldehyde, clear the smell in the car, and they occupy a very small space, very suitable for use in the car.

2. Put a few carbon bags in the car, the activated carbon has a good absorption capacity for formaldehyde, we can put a few packets in the car, but it should be noted that after a period of time we have to take them out, see the sunlight and ventilation, and then put them back in the car, so that the effect of removing the odor is better.

3. You can also use the car air purifier, the car air purifier on the market now, they have a lot of styles, they are designed to be very delicate and beautiful, put them in the car, can make your car more beautiful, but also help you remove formaldehyde, ** is also very cheap.

4. We can also drive the car to a sunny place, and then open the door to ventilate the car well, and remove the strong formaldehyde smell through ventilation and sunlight, which is economical and simple.

There are many ways to remove formaldehyde in new cars, and people in the big part know a little bit about it. Bai Maybe many people will say open windows for ventilation, maybe many people will buy activated carbon, and even some people will try some soil methods (such as: fruit skin, etc.)...

Regardless of the feasibility of these methods, how long it will take for our interior environment to be suitable for use should be our primary concern.

Therefore, we must have our own criteria for choosing a formaldehyde removal method: whether it is useful, whether it has a scientific basis, how efficient it is, how long it will take to move in safely, etc.

The bad thing is that many of us follow the trend, some people say that plants are good, buy plants, and some people say that activated carbon is good, buy activated carbon. The right method can achieve the goal quickly, and the inappropriate method cannot solve the problem, and it is very likely to cause more damage, so the method is very important! The right product is more important!

It is recommended that you can self-test or find a professional formaldehyde removal team to do a formaldehyde test, if you find that formaldehyde exceeds the standard, it is best not to open a toxic car insider, and the next capacity is the need to purify the air, the following methods are available for reference:

1. Improve the ventilation equipment in the car: install the indoor fresh air ventilation system.

2. Fruit deodorization method: place pineapple, orange peel, pepper, onion, etc.: divide them into small portions and place them in all corners of the car, as well as the place where the decoration smell is the strongest, and the decoration taste is generally greatly reduced within a week.

3. Use tea: make tea with boiling water, tea should be put more to ensure that the concentration of tea is enough, and when the tea vapor volatilizes, use a plastic poke to distribute it to all corners. After the water cools, reheat the water, and repeat this several times, and the smell of the interior decoration of the car is greatly reduced.

4. Ventilation: Try to keep the indoor windows open for ventilation for a long time, and you can also use electric fans to assist in accelerating the convection of indoor and outdoor air, and force ventilation for a month, and the decoration smell will be greatly reduced.

5. Physical adsorption method: materials such as Maya Lan and activated carbon are good formaldehyde adsorbents, and there are many tiny pores in their materials, so they can absorb a lot of unsaturated particles in a free state, and the effect of activated carbon will be worse.

6. Chemical oxidation reaction: most of the methods of air purification only remove the smell of decoration, but have no practical effect. Professional formaldehyde removal products can directly control pollution sources, and use oxidation to decompose volatile organic compounds and microorganisms in the air, with the most efficient and fast effect.

If you are not in a hurry, bai

Just don't drive every time.

Du wants to enter in a hurry, but Zhi opens all four doors for a while to disperse formaldehyde dao and peculiar smell. But you need to have about half a year of the version, and the smell can be smaller. If it's too slow, buy some air purification products online, but don't buy car perfume or anything, it's all chemicals that increase pollution, I bought Lan Nasen.

You can check it on the Internet, and the effect is not bad.

In the case of formaldehyde, the easiest way is to put a basin of water [you can also use ethanol, (alcohol)], which is used to dissolve formaldehyde, you can also buy a charcoal bag, and you can also recycle. Thank you.

Method 1: Ventilation method.

Ventilation is one of the most effective ways to remove formaldehyde in decoration. Experiments have proved that opening windows for ventilation for six months can remove 30%-65% of pollution, and the formaldehyde content in the air can basically be reduced to a safe range. However, the fenestration method also has its shortcomings, mainly because it takes too long to remove formaldehyde from fenestration, and it takes half a year at the shortest.

Method 2: Photocatalyst.

Photocatalyst is a component that catalyzes organic molecules floating in the air under light conditions, breaking them down into harmless substances such as oxygen, carbon dioxide, and water. Different photocatalyst products have different uses, such as photocatalyst wood essential oil is used for flooring and wooden furniture, and leather formaldehyde removal care solution can be used for leather sofas, car interiors, etc.

Method 3: Activated carbon.

Activated carbon uses its own countless tiny pores to have a good adsorption capacity for organic molecules such as formaldehyde, toluene, and TVOC to remove pollution. Note that activated charcoal needs to be dried frequently during use. To buy adsorption materials, choose products with vacuum packaging.

Method 4: Air Purification Mechanism.

Some air purification institutions claim that their products are independent research and development, high-tech content, confidential formula, in fact, the vast majority of institutions do not have this scientific research ability, confidential formula is often afraid to disclose their own ingredients, may be to use urea to remove formaldehyde. Although urea can also react with formaldehyde, it can only be used for industrial formaldehyde removal, and formaldehyde can be removed at the time of use, but formaldehyde pollution will be ** within a week, and it will also produce secondary pollution, because urea itself is harmful to the human body. Therefore, consumers must ask what the ingredients of the drug they use when choosing a formaldehyde removal agency.

Method 5: Plants.

The absorption of formaldehyde by plants is very small and limited, and experiments have proved that the amount of formaldehyde absorbed by a spider plant in a 100-square-meter home is not enough, that is, there is formaldehyde in the indoor air. Therefore, plants cannot be relied solely on to remove formaldehyde pollution.

At present, the volatilization of formaldehyde in interior decoration is a problem in the world, and there is no drug that can be immediately effective for the time being, and the fast-acting drug is often a product with secondary pollution like urea. Regular and effective products often take half a month to a month to feel the effect obviously.

After decoration, the process of formaldehyde release from furniture materials can last for three to fifteen years, so removing formaldehyde is not a project that can blindly seek speed, what is needed is long-lasting.

In fact, formaldehyde cannot be completely removed, and formaldehyde also belongs to the type that is slowly released. Therefore, according to the characteristics of formaldehyde, a cyclic Kang nano aldehyde removal enzyme has been developed, which can well control formaldehyde, and there is no harm or anything, and there is no secondary pollution, it can be said that it is the best product in addition to formaldehyde, but it is metal, cloth, wallpaper or something can not be used to remove formaldehyde, no one is perfect, of course, there is a defect that can not be removed from metal, but it can be adsorbed with some live ore.

Bamboo charcoal copying bag.

The bamboo charcoal in the charcoal bag is a porous structure.

It has a very bai

With strong adsorption capacity, DU can adsorb harmful DAO gases such as formaldehyde, benzene and sulfur dioxide in the car, and can release natural minerals. Moreover, the bamboo charcoal bag also has good water absorption, which can dehumidify, deodorize and prevent mildew in the car.

Car air purifiers.

Car air purifiers can filter the air inside the car, which can not only effectively remove formaldehyde, but also remove odors, bacteria and viruses and other polluted air, so as to create a healthier car environment.

The best way to ventilate a new car to remove formaldehyde is to open the window for ventilation frequently, open the window as much as possible when driving, even if the window is closed and the air conditioner is opened, the external circulation mode is used as much as possible to maintain the circulation of the air in the car, which helps to eliminate the odor and formaldehyde in the air in the car, and reduce the accumulation of formaldehyde in the car. This method is the most cost-effective.

The formaldehyde of the new car is mainly the seat BAI, seat cushion, floor mat, interior, paint, adhesive DU and other materials.

The volatilization cycle of formaldehyde is as long as three to fifteen years, and the first two years of new car use is the time when formaldehyde volatilizes the most.

Being in an environment with excessive formaldehyde content for a long time can easily cause dizziness, headache, nausea, and even cancer.

Aldehyde removal method for new cars.

First, the packaging plastic in the car should be removed as soon as possible, so that the harmful gases can be released quickly.

2. Open windows for ventilation.

Every time you open the window for ventilation before the car starts, and then leave, or usually stop the car window to flow out of a small crack, keep the car ventilated, can effectively reduce the concentration and odor of harmful gases in the car.

3. Place activated carbon.

There are car-only ones. Delicate small package activated carbon, easy to place in any corner, so that the space odor zero dead angle adsorption. Activated carbon is easy to be saturated, and it is more beneficial to absorb harmful substances by replacing it in time.

In addition, it is sprayed with about a week of clear mangreen nano photocatalyst to remove aldehyde, effectively purifying 90% of formaldehyde. It is a professional product for removing formaldehyde, which is convenient, practical and easy to operate. A must-have for those who have a car.