Why is the wireless password correct that the computer can t be connected, but the mobile phone can?

Wireless Router Issues:

1) Dead cycle - many wireless routers sometimes have a connection into a dead loop, that is, they keep getting IP and connecting, but they can't connect to wifi hotspots. - Let's try the all-purpose fix - restart. After turning off the power of the wireless router completely, turn it back on again after about 10 minutes.

2) Whether there are too many WiFi connected devices - too many digital devices connected to the wifi of a wireless router will put a lot of pressure on the wireless router, and it is easy to cause IP conflicts and cannot be connected - such a problem can be solved by setting a static IP for each device connected through WiFi.

You can only log in to the router to be able to view this; It can also be judged by the supervisor; The mobile phone can go online normally, indicating that the network is unblocked; If you restart the router for 10 minutes, the computer is not connected to the wifi and can access the Internet normally; It could be that your IP bandwidth is limited or your Mac is throttled!

This is usually a router problem, you can just restart the router.

DNS errors can be fixed with PC Security Guard.

Possible cause: There is a problem with the wireless card driver of the computer.

There is a problem with the wireless network setup.

There is a problem with the operating system.

In both cases, either your home wifi blacklisted your phone and you can't connect, or your phone can't connect because of even the problem mismatch. For example, if your mobile phone is not the mainland version, and the WiFi is set up with some settings that only support Chinese standards, this may happen.

Log in to the management page of your home wifi on the computer, the channel in the wireless settings is simply used to specify not to use automatic, select a commonly used channel, such as the frequency and attitude blocking channel selection Any of the three, 5G frequency band try 149-165 first, if not, try 48-140. Note that after changing this parameter, you need to save and restart.

There are three main differences between routers and 5G, they are different transmission frequencies; There are different examples of communication; The processing speed is different. In layman's terms, 5G is fast but short in distance, long in distance but slow.

There are a total of 14 channels in the channel, and our country uses 1-13 channels for a total of 13 channels. The 12 and 13 channels are not supported in some countries and regions, and if some devices are not supported versions, they will not be able to connect to the wireless.

If you have multiple wireless routers or APs in your home, you can set these three channels by yourself to avoid mutual interference.

Today's routers are all controllable, and you dig to see if your phone is blacklisted or restricted. You use your mother's mobile phone to enter the background of wifi and watch the round and lose.

It may be that the router is dead, or it is a problem with the wireless setting of the mobile phone, restart the router first, and try not to manually add the wifi connection.

Reset the router to factory settings, reset it and see if it can be solved!

There are two basic reasons for this:

1. The password is entered incorrectly, check the password carefully, especially CapLock2, the wireless router is multi-band, in fact, there are multiple wifi networks, and 5G is changed to the same password.

Pay attention to the password capitalization, in addition, if the wifi name is Chinese, it may cause the computer system to identify the error. You can also use the built-in repair tool to repair the wireless card.

Make sure you're connected to your own Wi-Fi network. If so, pay attention to whether the password is consistent, pay attention to the case of letters, etc.

It may be that there is an error in the Wi-Fi account or password of the computer, and you can re-enter the Wi-Fi account and password of the computer to connect it.

If you don't want to repair it, then connect your phone to the wireless network, and then connect your phone to the computer and set it up as a device link, so that the computer can access the Internet, and the mobile phone is just a bridge.

If there is an error in the Wi-Fi account or password of the computer, you can connect to it by re-entering the Wi-Fi account and password of the computer.

One is that you entered the wrong password, and the other is that the maximum number of connections to the wireless network you are connected to is exceeded, causing you to be unable to connect.

Why can't I connect to the wireless network that my mobile phone can connect to, and it says that the password is wrong? If you don't want to repair it, then connect your phone to the wireless network, and then connect your phone to the computer and set it up as a device link, so that the computer can access the Internet, and the mobile phone is just a bridge.

Then you must have entered the wrong password, otherwise this would not have happened.

You can restart the router and try it, or if it doesn't work, set the router again.

It is estimated that the wireless network in the computer has not yet scanned the broadband network number and cannot enter the password to log in, how can the connection be successful?

Enter the IP address of the wireless router in the IE address bar, and the setting box will pop up, reset the settings,

It may be a DNS error, the antivirus software repairs the network connection, and then finds the IP address of the wireless router and enters it into the browser to set the connection method and password of the wireless router.

If the password is incorrect, check if there is any problem with the network, and try again.

This is due to the difference between the two system standards. Haven't you heard that some things on the computer can't be read on your phone?

2. Click Manage Wi-Fi.

3. Delete the backed up network records that need to be connected but cannot be connected. Select the network and right-click to get the option to delete the network.

4. After deleting, click Add and select Manually create a network profile.

6. Finally, if this method doesn't work, you have to check to see if others can connect, but if it doesn't work, you can only restart the wifi.

Set up a static IP test on the computer to view the original post

You use the wireless cat of telecommunications, so you have to dial the number, so you can't use it, you can buy a wireless router connected to the cat and then send a signal to use the mobile phone. The specific how to set up the route manual is very simple.

Find your own wireless router in the list of wireless networks, point to connect, enter the password, and it's generally fine.

Whether the wireless router is not set up with the wireless function turned on, and set the password.

Hello, it looks like the router is not set up.

Check to see if your Wi-Fi router has restrictions in it, and if so, cancel it.