How did the wps disappear after my system update

Hello! Appearance: 0x???

The 0x ??? referenced by the directiveMemory. The memory cannot be"read"or"written"。

It has no effect on the computer or appears [occasionally], leave it alone, it may disappear automatically after [restarting the computer]. Pirated system or ghost version system, the problem may occur, install the official patch in time. Recommendations:

Hardware-induced: If it is caused by a memory module, remove the memory module, clean it and reinstall it. Replace the memory module if necessary.

This problem is rarely caused by hardware) software: the installed software conflicts with the system or other software, pirated or other software with viruses (games, etc.), if you use genuine software, this problem will not occur. [Mainly check the boot startup items, disable the startup items that are not necessary to start] and then when you open and run the browser, ** device, game, QQ, etc., when the problem occurs.

The general solution is to uninstall the software and reinstall it. If it cannot be solved, you need to replace other versions of the same type of software, or find the conflicting software and uninstall it to solve the problem. Check whether there is a problem with the driver, reinstall the driver, or update the driver in time.

You can try the following method: Start Run Enter cmd and enter the following command for %1 in (%windir% system32 *.) in the command promptdll) do s %1 enter.

When you're done, enter for %i in (%windir% system32 *.) belowocx) do s %i carriage return. If you are afraid of typing mistakes, you can copy these two commands, then right-click the mouse button after the command prompt, hit "paste", press enter, and wait patiently until the screen scrolling stops.

Restart your computer). Restore or reinstall the system if necessary.

Uninstall WPS2013--- set him to not upgrade!

How to update WPS on your computer:

Tool raw materials. wps2023

Win10 Lenovo Y7000

1. First turn on the computer and click [WPS] as shown in the figure below: Bad luck.

2. Then click [Three Horizontal Menu] as shown in the figure below

3. Click [About WPS] as shown in the figure below

4. Then click [Check Update], and if there is an update, you can update it, as shown in the figure below

If you have learned it, go and try it.

Let's briefly share with you the operation steps.

Computer: MacBook Air

System: macOS12

Click the gear icon at the top right of WPS and click Check for Updates. (Computer model: Lenovo Legion Blade 7000k, system version:

Win10, version: WPS Office 2013).

1. First, click on the gear icon at the top right of WPS.

2. Then click About WPS.

3. Finally, click Check to update.

4. Effect display, WPS is upgrading Zen concession.

The above is the tutorial of WPS update on the computer, and if you have learned it, go and try it*

1. First enter the WPS software in the tablet, and then click the grip setting to enter. Next, enter the interface and click on About WPS to enter. Finally, enter the interface, click the blind button to check for updates, and you can upgrade the WPS version.

2. First find PC Manager on our computer desktop and click on it. Then tap on the toolbox at the bottom right of the screen. Then click on Software Management. Then type WPS and hit enter. Then click Upgrade on the left side of WPS.

3. Hello, click the start button in the lower left corner of the computer desktop. Click once on all the programs in the start option. Once you have opened all the programs, find the WPSOFFICE folder and click Open.

Once opened, you can see a WPSOFFICE folder, click to open.

4. The WPS on the computer will be automatically updated as long as it is connected to the Internet, and there is no need for human intervention.

5. First open Word and then click the mouse to left-click [File] as shown in the figure below: Then click the mouse left to click [Account] as shown in the figure below: Then click the mouse left to update the office, as shown in the figure below to test the water:

Finally, click [Update Now] as shown in the figure below: This completes the upgrade of Office.

6. Open any wpsword file in your computer. Once it has been successfully opened, click on the home page in the top left corner. From the Home page that opens, click the Settings icon in the upper-right corner. In the drop-down menu that pops up, click About WPS.

Summary. If your WPS is displayed as an old version, you can try the following methods1Check for new version updates.

After uninstalling the old version of WPS, you can use the built-in "Cleanup Tool" or third-party cleanup software, such as CCleaner, to clean up the residual files and registry entries. 3.Reinstall WPS.

If you have a different version of WPS installed on your PC, it can cause version conflicts. You can uninstall a different version and then install the latest version of WPS.

If your WPS is displayed as the old Kanno Hui version, you can try the following methods1Check for new version updates. Open the WPS software, click on the "Help" menu, select "Check for Updates", and if there is a new version, install the latest version.

2.Clean up the residual files of the old version of WPS. After uninstalling the old version of WPS, you can use the built-in "Cleanup Tool" or third-party cleanup software, such as CCleaner, to clean up the residual files and registry entries.

4.Check if you have a different version of WPS installed. If you have a different version of WPS installed on your computer, it may cause version conflicts.

You can uninstall a different version and then install the latest version of WPS.

If the above methods do not solve your problem, we recommend that you contact WPS customer service or technical support personnel for help.

Hello! If your WPS shows up as old, you can try the following steps to fix the problem:1

First of all, make sure that your WPS Office has been updated to the latest version. You can get the latest version of the installer on the WPS Official** or in the Eggplant Store. 2.

If you have already installed the latest version and the problem persists, you can try reinstalling WPS Office. First uninstall the currently installed WPS Office, then re-update the latest version and install it. 3.

If the problem persists, you can try to clear the cache and temporary files of WPS Office. Open the WPS Office settings, find the relevant option and clear the cache. 4.

You can also try looking for options in your WPS Office settings, such as switching styles or themes, to see if you revert to the new interface. Hope you find this information helpful! If you have any other questions, please feel free to ask them.

Open Task Manager, (right-click on the status bar) to view the process, find WPS, terminate it, and then run WPS again. Re-embed the installation of WPS, and find the WPS "Configuration Tool" in the start menu. Because the installer is named, you can change it to a different name. Double-click the WPS installer and check Read and agree to install it immediately, and the message indicates that it cannot be installed.

The following describes how to retrieve historical versions of WPS:

Tools: Equipment (Mechanical Revolution S2), System (Windows 11), Application (.

1. Find the WPS software and click to open. Leaky Chang.

2. Go to the homepage of WPS software and look down for the file you want to find.

<>4. After clicking on the historical version, the historical version page will pop up, and you can find the historical version according to the time up and down.

Precautions for retrieving historical versions of WPS

1. You should choose to return the corresponding WPS version to the state of some corresponding old versions before you can use the functions of the old version.

3. In general, the historical version of WPS does not need to use the latest version of the operating system, which may lead to incompatibility between the system and the software.

1.First of all, open the computer's high-brightness control panel.

2.Select the "Programs" or "Programs and Features" option.

3.Find the 2023 version of WPS in the list of installed programs and select Uninstall or Delete.

5.After successful installation, you can go back to the original version.

Click on the Start menu and locate the WPS software folder.

Click Open, and below you can see that the Configuration Tool command is clicked to open.

Please click Enter a description.

Click Advanced in the pop-up Configuration Tools dialog box.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Select Run as administrator, and the installation prompts to install to complete the upgrade.

Please click Enter a description.

Hello, glad to answer for you!

If you want to use the original classic interface, you can do the following:

In fact, the WPS 2013 interface better improves the ease of use of the software, the operation is more convenient and fast, if there is a command that cannot be found, you can find the original menu in the drop-down corner next to the upper left corner of "WPS**", and use it temporarily. Then look online for the location in the new interface.

If you have any questions, please click on my avatar to ask questions or visit the official WPS forums and have a great day!

Delete the current version and install the old version.