Our computer can t be turned on, thank you for entering

Do you get into safe mode? Press the F8 key when you turn it on to see if you can enter. If you can't get in, reinstall the system. If you can enter, check for drugs, or check the system.

You can use the startup disk to access the DOS, and if you have the Dwarf DOS tool installed, you don't need to use the startup disk. Now it's generally used the ghost version to install the system.,It's so easy.,It's almost foolish.,You'll naturally install it when you go in.。

If the operating system can't be entered, you can directly take the system disk and install a system, and then delete the original toxic system when the installed system can enter. Turn on and put on the plate.

?Why use DOS?

Just set the computer to light up.,And then put it into the system disk and it's OK.。。

Press F8 to bring up the system boot menu, select safe mode, if you can, use antivirus software to kill the virus after entering, and it may be OK after the virus is killed.

If you want to reinstall the system and are not familiar with DOS, you can buy a Tomato Garden version of the system disk, enter the BIOS (keep pressing the DEL button after booting), choose to boot from the disc (different motherboards are different, be patient and find it slowly), and then start again. The installation interface will appear after the disc is automatically booted, and it is easy to understand, beginners can choose the unattended mode!

Why use DOS to reinstall? Can't your machine boot on the disc? It is recommended that you boot and install the operating system with a CD-ROM that can install 98 2000 XP.

The way to do this is to put in the disc first and restart the computer. If it doesn't work, you'll need to modify your BIOS settings to set disc boot to take precedence over hard drive boot. As far as I'm aware, only Windows98 offers an installer that utilizes DOS installation by putting in a disc, typing setup under DOS, and pressing enter to install.

If you want to install 2000 or XP, you can only install 98 first (you don't need to install hardware drivers) and then upgrade and install.

Spend four dollars to buy an auto-installed ghost installation system and reinstall it, and it will be installed in 20 minutes. It must have been poisoned. My computer was infected with a virus by a classmate a few days ago, and it couldn't be opened, and finally it was a reinstalled system.

Once you enter the BIOS, set the optical drive to FIRST to boot up.

There is no response when booting or not running the program when booting.

The display switch can be turned on、??

Your problem is likely to be one of these two situations:

1. The connection port between the monitor cable and the graphics card is loose. Plug and unplug the tightening screws.

2. There is dust in the slot between the gold finger of the graphics card and the motherboard. Unplug the graphics card cleaning gold finger and plug it back in.