After making the system partition for the new hard disk under the PE of the USB flash drive, restart

Your partition is damaged by the boot file, it is estimated that the original operating system area was modified when you partitioned, you can reinstall the system or find software to restore it.

The hard disk partition table is corrupted, it is recommended to use pm to completely install the partition tool inside to repartition, and then G into it!

Open the C disk with PE,GenerallyPE system will not set file hiding,You can see a file,If not, search for a content from the Internet to cover it,There may be that when you install the system, Ghost has not finished running and you reboot it,Try it again。 Also, the ghost image file you used to make the system is wrong.

Try to change to XP or Win7, there is no command on the C disk, how can it be formatted? Format yourself yourself, how to support it.

What are the specific tips? Note that the hard disk mode is selected as IDE or ACHI.

It really doesn't work, use the optical drive to install it. Still not working or the disk sector 0 is lossy, it is recommended to use some gadgets to check or virtual 0 sector.

The new hard disk partition is recommended to have only one primary partition and to be activated to boot, if the partition is wrong or abnormal, it can cause the boot can not be booted, I hope to help you do not understand can be asked.

If the boot system partition is missing or not set up properly, there is a boot partition repair in PE.

If the zero track information of the hard drive is missing or damaged, you need to install it with the installation version CD, and then do it again with the ghost version you like.

It may be a problem with the activation of the partition or the guidance.,If you're interested or interested, try to do it yourself.,No.,Only find someone else.。

1. Restart the computer, enter PE, DiskGenius selects the system partition, activates the partition, and rebuilds MBR. Save to exit.

2. Use PE repair system to guide.

3. Repartition.

It is recommended to repartition under PE with DiskGenius and re-ghost, your hard drive partition boot file is missing. That's it, I hope it helps.

You're installing the ghost version of win7.

It turns out that Win8 may be EFI booted,C disk uses GPT format and there is a 100M boot partition in front。

You need to delete the two partitions in the PE first, and then re-propose a primary partition and set it as active.

diskgenuis is not completely.

Then run ghost restore.

Format the C drive into FAT32 format (there are options when formatting), and then install the system.

System error bar Enter the boss with a USB flash drive in the edge.

Go to the BIOS to change the hard disk transfer mode, and then partition the system, and then change it back to AHCI mode after it can enter the system normally

Hello I don't know what system you installed,PE repartition you have partitioned it well,This prompt is not found in the system partition,Are you not setting the C disk as the main active partition,Second, what system are you installing,Don't tell you that the installation is the XP system,From your notebook,Your notebook can only install the win7 system,And it is recommended that you install the complete installation version of the win7 system,Use less ghostwin7。 Most of the problems you have should generally be the first partition problem, you haven't completely got rid of the hidden partition or you forgot to set the C drive partition as the main active partition. Good luck with you, and you can contact me for more.

This prompt may cause the hard drive to be corrupted. You can use a tool such as "HDTune" to check your hard drive. If you rule out the hard drive, it is likely that there is a problem with the BIOS settings, and you can try to restore the BIOS to the default settings.

There is also a case where the system fails, and if so, generally reinstalling the system can solve the problem.

The probability of system disk file loss on the USB flash drive is too low, if you have this situation, it is recommended to fix the boot.

If there are no errors in your partition, then check your system disk and try a different one. If you want to i system disk is fine, it is recommended to reinstall, if the reinstallation is not possible, then your partition has a problem. Either the file is still alive, or it's missing.

Then you can change the system and take a look.

Right click on My Computer - Management - Disk Management Here there is no partition option, have you noticed that there is also an unpartitioned blank disk next to the C drive! Right-click on the disk, select Delete Logical Drive and then you can partition the operation, the C drive does not provide partition operation.

Also, just having the C drive won't make the system slower and slower, unless you keep stuffing things into the C drive.

There are two kinds of partitions, one is the primary partition, the other is the extended partition The main partition is the partition with the system, and the extended partition is the partition system with the number of extended partitions must be installed on the main partition, otherwise it cannot be booted, and some dual systems can install a system on the extended partition, but at least one system must be installed on the main partition, otherwise it will not be bootable.

You use a USB flash drive to make a PE system, after entering the PE system, it is generally with a partition tool, click on the partition tool, you can partition, as for how many areas, how big each area is, it depends on your current hard disk to decide, if you want to consider installing W7 64-bit or above system, then the C disk at least score a 50 60G, so as to ensure that there is enough space to install other things after installing the system, otherwise it will be full all of a sudden, and it will be troublesome to re-partition it when the time comes. For other plates, it's free. A 500G hard disk is divided into four areas, C disk is divided into 60G, and other disks can be distributed evenly or according to your own wishes.

Under normal circumstances, a hard disk is divided into four to five areas, not too many.

The first step is to open the disk manager and enter the disk information interface.

Right-click on your computer and click Manage. Once you are in the Manage Computers interface, select Disk Management. Once inside, you can partition the disk accordingly.

The second step is to calculate the size and drive letter of the area you are dividing.

The memory size of a computer is converted according to 1024, that is, 1 trillion = 1024kb, 1g = 1024 trillion. After calculating the size of each drive letter, partition it. For example:

A 500g hard drive can be divided into 100g, 200g, 200g. Then we need to divide it into 102400m, 204800m, and 204800m.

The third step is to create a compressed volume to partition the disk.

Right-click the disk you want to partition, select the compressed volume, and click to display an interface to calculate the partition. At this time, the computer will automatically detect the available partition size, and wait for a while to enter the partition interface.

Step 4: Enter the size of the partition and partition it.

Enter the size you just calculated into the compressed column, don't make a mistake, be sure to see it, don't enter one less zero or one more zero when entering, be sure to read it and then click OK.

Step 5: Set the drive letter of the partition.

The partition that has just been built does not have a drive letter, we need to allocate it ourselves, right-click on the new disk, click on the new option, click on the next step, and then the interface of assigning a disk letter will appear, select the drive letter you want to allocate for allocation.

Sixth, if the partition is misallocated, then merge it into the repartition.

First of all, you need to delete the drive letter you just allocated, you can only merge partitions after deleting the drive letter, right-click the disk you just divided, and select Delete Volume.

Step 7: Merge partitions.

This is an important step because we want to merge it into that disk and right-click on that disk, but it should be noted that it can only be merged into adjacent disks. Right-click the disk you want to merge to and select Extend Volume. After selection, a wizard interface will appear, just follow the instructions step by step, and click Next to the end.

When you install the system on the USB flash drive, you will have a hard disk partition tool when you enter the one-click installation interface. It's convenient to use that partition.

Select the third option and partition it directly.

If it's win7, it's okay if you don't partition it, and you can divide the partition with free space in the management disk after installing the system!

If it's xp, just divide it,