Ask a question about a model ship How to model a ship?

The domestic trumpeter is good, ** is relatively cheap, 1:700 seems to be less than 200 yuan. 1：

The Bismarck of 700 is about 36 centimeters, and the length of 1:350 is twice that of 1:700.

Do a single ship model does not need to be weathered, generally only the vehicle series to do the olding, as a novice, do not have to paint, if you want to go on, then according to the manual first buy all the paint color (preferably spray paint), novices with a pen to color is not able to control the thick book, and the ship has a lot of small parts, it is much more convenient to use spray paint, and don't forget to buy masking paper, the same part is sprayed with different colors of paint to use, you do this one, with ordinary stickers can also be used, but the stickiness is a little better, other tools scissors ( Or use professional cutting pliers), tweezers, utility knives are required, glue is recommended to use Tamiya's, ordinary kind on the line.

Hasegawa's looks like it's all waterlines, and you can look for Tamiya's and trumpeters, and the trumpeters' have bases.

1:700 is about 25 centimeters and no more than 28

1:350 is about 52 to 55 centimeters.

Tools model pliers are a must, what kind of small scissors are used without model pliers, as well as small tweezers, utility knives and model glue.

In addition, if you pursue refinement, it is recommended to buy some etching sheets and model paint, add some color yourself, and do aging and the like.

Hmph......I'm afraid you kid is impatient! I made a model of a Leopard tank and sprayed it with camouflage alone for a month and the old talk ......It's terrifying!

Half of them are few, and the whole ship is more. In addition, there are also brackets for the whole ship, which can be placed. Generally with a motor. The length of 35cm, 55cm Anyang spring bamboo shoots model is sold. You can look it up online.

Tools Raw materials: wooden strips, rigid ridge paper, knives, saws, boards, drawings, pins, sandpaper, glue, rulers.

Method steps.

We first made a rough model of the ship's infiltration, pasted it with wooden planks one by one, and then surrounded the ship with wooden planks.

Next, make the bow and stern of the boat so that our boat can be placed in the water and not sink, and then make the middle part of the boat a position for people to sit.

Then you can paint the silver paint, the interior with MG995 model, 180 degree hall branches, organ plug waterproof, water-absorbing rudder hose into the warehouse, 550 motor water-cooled copper pipe, then you can install a motor on the model, install a homemade water cooling device on our motor, and then install a propeller around the ship.

1.Brief introduction.

Boat model making is a very fun and challenging handicraft activity. It requires a certain amount of skill and experience. Ship model making is mainly divided into two main parts, namely modeling and assembly.

Modeling refers to the use of scale and calculations to design a model to ensure the best possible results during the production process. Assembly, on the other hand, involves putting the model together, using the appropriate tools and materials to ensure that each component meets the requirements.

2.Materials and tools.

Before you start making a model ship, you need to prepare some materials and tools. Commonly used materials include wood, glue, paint, and small decals or logos. The tools required may include a variety of scales, sharpeners, files, needle pliers, tweezers, brushes, needles and threads, etc.

3.Modeling.

Modeling is at the heart of the entire production process. Modeling is usually calculated and designed according to the scale of the actual ship. It is best to use scale markers to ensure that the individual scales are accurately measured and calculated during the model making process.

After that, the material is cut to the desired size and shape according to the proportions, such as the hull and deck of the boat.

4.Assemble.

Assembly is the process of putting all the parts together. In order to ensure that the model can be assembled perfectly, it is necessary to use fine adhesives and appropriate materials. This typically includes yellow, white, or instant glue that holds parts together, as well as a variety of different types of needle forceps or tweezers.

It is also necessary to use tools such as files and sharpeners to complete the assembly so that the parts can be trimmed or fine-tuned if necessary.

5.Paints and decals.

Once the modeling and assembly process of the ship model has been completed, it is ready to be painted and labelled and decals applied. This involves applying a primer, then applying your choice of colors and stripes, huss patterns, and other paints to guarantee that your boat mold feels realistic and aesthetically pleasing. In addition, appropriate signs and decals such as logos and windows need to be affixed.

Finally, the made ship model should be displayed on an appropriate display case or display stand to protect it from dust and damage.

6.Professional advice.

If you are making a ship model for the first time, we recommend that you choose some models that are simple and easy to make first. As you gain more experience, gradually increase the difficulty. It is advisable to use good tools and materials, which will help you get the best results.

Also, clean and maintain your model regularly to ensure it stays clean and accurate.

7.Conclusion.

Boat model making is a challenging activity that requires a certain amount of skill and experience. By properly designing and assembling your model, you can achieve a unique and artistically valuable result. Hopefully, this article will help you get started on your boat model-making journey.

Tools: a small model hand-buried according to a hand, a wooden file, a number of pieces of wood sandpaper, a hot melt glue gun, a hot melt glue stick, a hot hair dryer.

Material transportation: bending plywood: used to make ribs and keels;

Pine strips: for hull skinning;

White latex: for bonding;

The pin is temporarily fixed after gluing and before glue drying;

Sandpaper: polish after production;

Varnish: for final decoration, moisture-proof, fixed.

You make a hydrofoil, it's very fast, and you can do it if you see I love invention, and I don't need foam board.

My ship model.

On this day, our art teacher, Mr. Liu, assigned an assignment: make a boat.

It's hard for me to be a boat. I thought to myself. Thereupon.

As soon as I got home, I found the ingredients: a jelly box, a piece of foam, a roll of ribbon, a roll of double-sided tape, and a pair of scissors. I found the materials, but I always felt that something was missing.

What's missing? I muttered to myself as I examined the material to find some clues. Suddenly, I jumped up and shouted:

By the way, there is also a lack of jams. ”

Finally found all the materials. So I started making boats.

First of all, I measured the length and width of the bottom of the jelly box, then drew the size of the bottom of the jelly box on the cardboard, and then used the scissors to cut along the line I just drew on the cardboard, and cut out a piece of cardboard that was exactly the same size as the bottom of the jelly box. Then, one side of the cardboard was covered with double-sided tape. After carefully pasting the cardboard to the bottom of the jelly box, the first step is complete.

The second step is relatively simple, just cut a piece of foam that is 15 cm thick, 15 cm long and 3 cm wide on top of the foam. Then apply double-sided tape to the bottom and front of the foam, then cut a rectangular piece of cardboard on the cardboard, stick it in front of the foam, and finally glue the foam to the bottom of the jelly box.

Now to the last step: decorating the ship. I took the streamers first, and cut out 8 streamers according to the length and width of the outside of the jelly box.

Then stick double-sided tape on the side of the ribbon that has no color and pattern, and finally paste the ribbon on. A beautiful ship was born.

A ship model is a model of a ship, which is a scale model made in strict scale according to the shape, structure, color, and even interior parts of a real ship. Because of its true reproduction of the main characteristics of the original ship, the ship model is well-made, and it itself contains the ship culture, which has a high collection value. A set of carefully collected ship models can completely and truly reproduce the history of a shipping company and a ship brand.