Is GB the ISO standard in the quality management system?

GB T 19001-2008 is based on ISO9001:2008 translation.

You see that the standard cover of GB T 19001-2008 is marked in parentheses: ISO9001:2008, IDT

This means that the identical code name is used

There are three levels of application of international standards as set out in International Guideline 21, i.e., equivalent adoption, equivalent adoption, and non-equivalent adoption.

1) Equivalent adoption. National standards are equivalent to international standards, with only or no modifications.

Sexual modifications. According to ISO IEC Guideline 21, it refers to a modification that does not change the content of the standard technology. such as correcting typographical or typographical errors; changes in punctuation; Add instructions, instructions, etc. that do not change the technical content.

It can be seen that the equivalent adoption means that the national standard is the same as the international standard, and no or slight modification is made.

2) Equivalent adoption.

National standards are equivalent to international standards, with only minor differences in technology. It can be seen that equivalent adoption means that there are small differences in technical content and are not exactly the same.

The so-called small technical differences, defined in 1SO IEC Guideline 21, are: small technical differences between national standards and international standards mean that a technical difference has to be used in national standards and can be accepted in international standards, and vice versa. For example, the Austrian standard ONORMS 5022 for noise measurement of inland waterway vessels includes a recommended format for a test report, which is not included in the corresponding international standard ISO 2922.

3) Non-equivalent adoption. National standards are not equivalent to international standards. This is the third degree of equivalence specified in ISO 1EC Guideline 21.

When non-equivalent is adopted, there are significant technical differences between national standards and international standards.

Generally, the IS9000 certificate issued by the certification body will be written on the standard of GB T19001-2008 IDT ISO90001:2008, or written as the quality management system in accordance with GB T19001-2008 IDT ISO90001:2008, as long as the certification body is recognized (such as CNAS, IAF), the certificate is common in most countries and regions in the world.

GB T 19001-2008 is a Chinese standard.

ISO9001:2008 is an international standard.

China is formulated in accordance with international standards, and the two can be considered to be the same standard. There may be some foreign customers who will ask for ISO.

GB T stands for GB recommendation.

iris00zzr is particularly comprehensive, I don't have anything to add, heh.

Legal Analysis: The standard is a systematic standard, involving a wide range of scope and content, and emphasizing the clear division and coordination of the responsibilities and powers of various departments, so that enterprises can effectively carry out various activities2Emphasize the involvement of the management, clearly formulate the quality policy and objectives, and achieve the purpose of understanding the operation of the company's internal system through regular management review, and taking timely measures to ensure that the system is in a good operating state3

Emphasis on corrective and preventive measures to eliminate potential causes of non-conformity or non-conformity, prevent the recurrence of non-conformity, and thus reduce costs4Emphasize continuous audit and supervision, to achieve the purpose of continuous revision and improvement of enterprise management and operation5Emphasize the participation and training of all employees to ensure that the quality of employees meets the requirements of the work, and make each employee have a strong sense of quality6

Emphasis on cultural management to ensure the regularity and continuity of the operation of the management system.

Legal basis: Article 14 of the Product Quality Law of the People's Republic of China The state implements the enterprise quality system certification system according to the international quality management standards. According to the principle of voluntariness, enterprises can apply for enterprise quality system certification to the certification body recognized by the market supervision and administration department or authorized by the market supervision and administration department.

If it is certified and qualified, the certification body will issue the enterprise quality system certification certificate. The state refers to the international advanced product standards and technical requirements, and implements the product quality certification system. If it is certified, the certification body shall issue a product quality certificate, and the enterprise shall be allowed to use the product quality certification mark on the product or its packaging.

Ma Jingqin: An independent consulting expert, a senior trainer employed by international certification bodies (SGS in Switzerland, BVQI in France, TUV SÜD in Germany, etc.), and a reviewer of the National Quality Management Award for Excellence in Performance Management. Since 1999, it has successively been the backbone manufacturing enterprise of domestic vehicles and parts

More than 70 companies, including Great Wall Motor, FAW Car, FAW Automobile Research Center, Jiangling Motors, Shenyang Brilliance BMW Automobile, Harbin Mitsubishi Engine, Xi'an Cummins Engine, etc., provide QS900 TS16949 certification consulting and training. In the past few years, he has been the only expert to give keynote speeches at the ISO TS16949 seminar organized by DNV Det Norske Veritas (Qingdao, China), BVQI (Harbin, China), TUV-SUD, South Germany (Dalian, China), Germany, and internationally renowned certification bodies.

First, about 16949 certification.

16949 is an abbreviation for a quality management certification system for the automotive industry. The full name is ISO TS16949:2009, which is actually a technical specification for the international automotive industry, which is designed based on ISO9001 and added to the technical specifications of the automotive industry.

This specification is completely consistent with ISO9000:2008, but focuses more on defect prevention and reducing quality fluctuations and waste that are easy to occur in the automotive parts chain. The specificity and applicability of the ISO TS16949 standard is very clear, and it only applies to automotive OEMs and their direct spare parts manufacturers, which means that these manufacturers must be directly related to the production of automobiles, can carry out processing and manufacturing activities, and through such activities, can add value to the products.

Second, the scope of application of 16949 certification The technical specification of 16949 combines ISO9001:2000 to describe the quality system requirements for the design, development, production, installation and service of automobile-related products. ISO TS 16949 applies to suppliers and subcontractors who provide production and service parts for the following items:"Scene"：

Parts or materials. Heat treatment parts, painting, plating, or other final processing services. Other customer-specified products.