Wireless Router TP Link 541G Is there a way to upgrade the latest firmware to get the Bridge functio

As long as it's the same model, I've upgraded a lot, but there is a principle you need to pay attention to: start upgrading from the official to find the version closest to you, and go higher and higher! If you want it to go wrong! From low to high!

It's better not to try! If you don't listen to me, you can upgrade according to the cross-version on the 4th floor, but you do it at your own risk!

Of course, it's different, so you'll need the two at the bottom of the page!

If you are talking about v4, you can upgrade it if it is the corresponding upgrade version of your route (it can be upgraded across versions).

**Good upgrade file to unzip out, find the firmware in the last system setting of route management (the word may be different for different versions) upgrade, and upgrade it according to the content of the page. After the upgrade, all settings are lost, please make a note of the IP account and other information.

I haven't tried it, but it shouldn't be upgraded.

I haven't tried it, but I still ask the manufacturer to rest assured.

This one is the latest TL-WR740N V5 V6 110909 Standard Edition, your version is July 8th, and this latest one is September 9th.

Upstairs is given for May 23.

Which is new, judge for yourself.

The latest version has hairy use, the latest is amazing, and what people want is to solve the version of Henan Unicom Broadband to engage in wool.

Flashing the firmware is a function that can be perfected before. Some of them may also have some more functions after flashing, for example, there was no speed limit function before, but now it is available after flashing the firmware, but this is just an example. This is the official method of upgrading the firmware.

However, if it is some prawns, it may change a lot. Generally, we generally don't brush him for no reason. Flashing it may be that there is a problem with the firmware you are using now.

Even if our general brushes are based on the firmware given by the official website.

It can improve the performance of the router.

It could also be a bug in the software that the manufacturer has fixed. In general, it does not affect the use. If it's a high-end router. Try to stay up to date. Because information such as routing tables may be updated. Household use is generally left unattended.

Router upgrade, each upgrade firmware has update instructions, improve stability or add features, etc.

To put it simply: you can add some new features, such as new protection features or improve network speeds, etc., in short, it is beneficial.

Non-commercial third-party firmware available for some wireless routers. Powerful, but with a friendly web management configuration interface, it can provide many functions that are not supported by the "original" router, such as adjusting the wireless transmit power.

TL-WR541G+ and above 100126 standard version.

Let's go down this.,If you won't upgrade.,You can hi me.。 Hope it solves your problem. Good luck!

If you upgrade normally, if the version does not support your router, there will usually be a prompt, such as "It may cause the router to not work properly", and ask if you want to continue. If that's the case, you don't want to rise.

The 541G comes with a QoS flow control function, and the flow rate can be set directly in the advanced options.

Before upgrading, it is best to consult TP's after-sales service to refresh the hardware of the router according to the actual situation of the local operator to avoid the phenomenon that the router cannot work normally after flashing.

If the router upgrade fails, find TP after-sales service to solve the problem.

1. WR541G This router itself has the function of "IP bandwidth control" (that is, the function of limiting bandwidth), log in to the router and take a look, no need to upgrade the software.

2、WR541G has its own exclusive firmware that limits bandwidth:This should be nothing exclusive,This function is provided by the router manufacturer,All the information of this router can be queried on the TP official**。

3. How to set "IP bandwidth control" can be found here.

Step 1, Step 2.

Connect the router to the computer with a network cable, one end of the network cable is plugged into the network cable jack of the router (any port), and the other end is connected to the network cable jack of the computer. It should be noted that it is necessary to check whether the socket is fully occluded, if it is not properly connected, it may cause the upgrade to fail.

Step 3: Log in to the management interface of the router. Open a browser and enter the IP address of your router in the address box. For example, if you want to press Enter the IP address of my router, enter the management account and password of the router in the prompt box, and the password and account number are "admin" by default

Step 4After entering the router management interface, find "System Tools" in the function options and click to enter.

In the pop-up secondary menu, find "System Upgrade" and click to enter.

Step 5: Click "Browse" in the pop-up dialog box and select the upgrade file. It should be noted that at this time, please check the file version number to ensure that it is correct.

Note: The dialog box and operation interface of different routers will be slightly different, please operate according to the actual situation.

Step 6Click the "OK" button, the router will enter the upgrade mode, the whole process will take about 15 minutes, please be patient. Once the upgrade is complete, the router restarts.

Note: Do not disconnect the power supply to the router or the network cable connected to the computer at this time.

Step 7After the router has successfully upgraded the system firmware, start from the third step, set the router again and check if it can be used normally!

Precautions. The dialog box and operation interface of different routers will be slightly different, please operate according to the actual situation.

Do not disconnect the power supply to your router or the network cable connected to your computer during the upgrade process.

It is possible to upgrade, but as prompted, you need to maintain an internet connection.

Therefore, it is recommended to upload the Shengheng Xinshan-level tanning file to the local area before upgrading.

1.New functions can be obtained by upgrading the firmware, such as: TP-Link W340G+ After upgrading, you can get the function of IP-MAC binding (there was no before, but the newly purchased ones are directly available), and a variety of special dialing methods have been added.

2.Some bugs from the previous version may have been fixed, but new bugs may also be introduced

If the firmware is not upgraded and the operator's sharing blockade cannot be broken normally, it is easy to drop the line or only one can be connected.

However, in general, don't upgrade the firmware, where to buy the router to find whom, sell this special firmware that specializes in breaking through various operators, and the official website firmware is different.

In layman's terms, it can be understood in this way Why do you want to upgrade when you play a game? Upgrade, so the name is to make it run better and more powerful, my router hasn't been upgraded yet, and my home 2 trillion is also a desktop, a notebook wireless, and there has been no problem you said.