Which one has on hand, the unit construction organization design comprehensive case, preferably resi

The basis for the preparation of the design of the construction organization generally includes the following parts:

1. Bidding documents: indicate what unit (generally the owner) and what project bidding documents (generally numbered).

2. Design drawings: specify what design unit is the design drawing of what project.

3. The relevant norms of the country (if you want to improve, it is best to list all the norms involved, including the number, in general, this part of the content is the most).

4. The relevant regulations of the unit (if the unit has passed the ISO quality management system, the internal standards of the enterprise, and the construction method, if it is applicable to the project, it should also be written, and the construction site can also be used according to the map).

5. The owner's relevant Q&A and the results of the on-site self-inspection of transportation, energy, environment, etc.

Under normal circumstances, the preparation of the construction organization design is based on the content of these aspects, the difference is only the depth, some are written extensively, the investigation is more realistic, the basis is more realistic, and the construction organization design written by the banquet is more operable.

Example: Basis of preparation.

Pingguo Aluminum Company Bidding Documents (Pingguo Aluminum Ergong Zhao Zi [(2000)] No. 3).

Relevant design drawings and descriptions of Guiyang Aluminum and Magnesium Design Institute.

The current technical specifications and technical standards issued by the state.

The current construction acceptance specifications, engineering quality assessment standards and construction operation procedures issued by the state.

1. Engineering Measurement Code (GB50026 93).

2. Code for acceptance of construction quality of building foundation engineering (GB5020 2002).

There is a lot of content in this part, and it is best to use ** form)

Our company's current quality, safety manual and project management manual.

1. ISO9001 quality management system, ISO14001 environmental management system, ISO18001 occupational health and safety management system.

2. The company's management regulations: ......

3. The company's corporate standard and construction method: ......

6. The actual situation grasped by our company on the site inspection.

The construction of the absolute bend of the organization design of the real funny Hongfan example to invite the landlord to the hail.

Template of construction organization design of unit project.

Introduction: Detailed construction organization design of a unit. According to the size of the building, the complexity of the structure, the content of the new technology, the requirements of the construction period, the natural economic conditions of the construction site, the technical strength of the construction unit and its familiarity with this type of project, the content and depth of the construction organization design of the unit project are different.

The more complete unit engineering construction organization design includes the following contents:

Organization design of unit pipeline engineering construction.

Introduction: The starting point of the construction organization design of the pipeline project of this unit is the south side of the sewage treatment plant, the station number is K0+000, the end point is the north bank of the Yanghe River, and the station number is K5+, passing through the farmland of Yaojiafang Town and Xuanhua Shalingzi Town of High-tech Zone. It mainly includes the water withdrawal pipeline and the water withdrawal nullah, of which the maximum capacity of the water withdrawal pipeline is.

K0+000 K4+300 is a 1500 reinforced concrete drainage pipe, with a total length of 4300 meters, a flexible interface of sliding rubber ring, a sand and gravel foundation for the foundation, and 46 inspection wells.

Construction organization design of A3 and A4 floors of a high-rise residential garden phase I in Kunshan 84 construction plan for external wall insulation (steel wire mesh frame) of high-rise residential building project 30 Organization design of plumbing construction of a high-rise residential building in Tianjin 42

Construction organization design of reinforced concrete shear wall structure of high-rise residential main building of a power design institute 51 Organization design of water and electricity installation construction of staff residential building of a hospital in Sichuan Province 75 Construction organization design of a high-rise residential community in Chengdu 318

Chongqing high-rise residential construction organization design (33-storey Three Gorges Cup Award Project) 255 Harbin residential community fire engineering construction organization design 150 a high-rise residential basement raft engineering construction plan 148

Shandong Armed Police Frontier Corps Temporary Electricity Construction Organization Design for High-rise Residential Buildings 42 Zhejiang Province Residential Water and Electricity Construction Organization Design 56

Organization design of temporary electricity construction of a faculty residential building 113 Organization design of construction of a high-rise residential building (shear wall structure) 309 Special construction plan of punching piles for residential community engineering 137 Organization design of hydropower installation and construction of a residential community in Shanghai 162 Organization design of interior fine decoration construction of a high-rise residential building in Beijing 201 Organization design of fire protection engineering construction of a residential building in Beijing 167

Residential water and electricity construction organization design of a community in Chengdu 134

Construction organization design of electrical engineering in a residential community in Beijing 150 Construction plan of formwork for buildings 4 and 5 in the North District of staff housing of the Chinese Academy of Sciences and Tsinghua University 125 Construction plan of a high-rise residential basement raft project in Wuhan 199 Construction organization design of a high-rise residential building in a community 589

Huamei Cangzhou residential building roof steel structure maintenance project construction plan.

1.Construction organization design approval form.

2.Basis for compilation.

3.Project overview and construction conditions and the project manager's discussion of the key and difficult points of the project 4Construction management objectives and management responsibilities.

5.Preparation for construction.

6.The overall deployment of the construction.

7.Construction methods and technical measures of major projects.

8.Technical and organizational measures to ensure the quality of the project.

9.Technical and organizational measures to ensure safe production.

10.Technical and organizational measures to ensure civilized construction.

11.Technical and organizational measures to ensure the duration of the project.

12.The main materials and construction machinery and equipment, machinery and tools invested in the project plan 13Workforce Placement Program.

14.Finished and semi-finished product protection measures.

15.Construction schedule or duration network diagram.

16.General layout plan of the construction.

Construction organization plan, construction schedule drawing, construction plan bar diagram, construction site layout plan.

What is the specific content of the construction organization design of a comprehensive building, the following Zhongda Consulting will answer for you.

Chapter 1 Project Overview.

Section 1 Building Overview.

Building Overview: The ground floor of the project is the façade, 2-4 floors of the AB two-unit fund-raising building, the floor height is 3 meters, the total height of the building is meters, the building is rectangular, long meters, wide meters, the ground floor area is square meters, the standard floor is square meters, and the total construction area is square meters. Repentance.

Walls: exterior walls, stairwells and load-bearing interior walls, made of standard bricks and mortar masonry; The interior partition walls were built with mortar and light hollow bricks. The wall is provided with a 1:2 cement mortar moisture-proof layer.

Guami stone concrete floor floor.

The roof is not a human roof, and the practice is: lime cement slag insulation measures, PWEE-4 membrane waterproof roof, and local terracotta slope roof.

Decoration: The exterior walls are made of mosaics and porcelain panels. General plastering of the interior.

The doors and windows are wooden doors and windows and aluminum alloy doors and windows, and the façade is a roller shutter.

The second section lacks the front orange structural design.

This project is a brick-concrete structure, ordinary bricks, M5 mortar masonry, the foundation is made of artificial digging piles, the digging piles are connected to the ground beams, precast concrete hollow slabs and roof panels, girders, columns and toilets, kitchen and toilet boards are cast-in-place concrete. The door and window lintels are prefabricated. The steel bar is made of I, grade steel, and the protective layer beam and column are 25, concrete and dark column 20, slab 15, C25 concrete.

The third volt group festival professional overview.

Hydropower sanitation, with water supply steel pipes, drainage pipes (including roof rainwater pipes) using rigid PVC plastic pipes, rainwater pipes to drainage well connection pipes using DN200 concrete pipes, ceramic toilets; Wire lighting, the power supply is drawn from the low-voltage distribution of civil electricity in urban areas to the main distribution box, and then led to each distribution box respectively, and is led to the corresponding user meter box by each distribution box.

Section 4 Construction Environment.

The site has been completed with three links and one level, and the seismic level is fortified according to 6 degrees, and the basic wind pressure is appropriate.

The engineering materials are purchased by the construction unit, and the materials required for the project, reinforced concrete components, etc. are purchased by qualified manufacturers.

The characteristics and difficulties of this project are the construction of digging piles, the waterproof treatment of the roof kitchen and toilet and the outdoor decoration.