Renovation is not necessarily required for water and electricity renovation

Renovation does not necessarily require water and electricity renovation, but if it is a rough house, it is recommended to hire a plumber to carry out water and electricity renovation, because some of the sockets, switches and water outlets set up by the developer are often incomplete or do not meet the owner's preferences.

Hydropower renovation is generally a comprehensive renovation according to the suggestions of the hydropower master and the personal preferences of the owner.

Waterway renovation: The first step is to replace the indoor water pipes and replace them with better water pipes that you bought. Of course, if you trust the developer's water pipes, some of them don't need to be replaced.

Then according to the master's suggestions and personal preferences, set up the kitchen, bathroom and balcony water outlets, including the location of the washing basin, the location of the small kitchen treasure, the location of the bathroom sink, the location of the water heater, the location of the shower, the location of the balcony laundry pool, etc., as well as how to go to the hot water, such as the hot water in the bathroom to guide the kitchen, etc., so you need to determine the location of each water outlet. Then look at how the water pipe goes, against the wall, or in the middle, etc.

Circuit transformation: Under normal circumstances, the developer's original wires will be replaced (generally except for the wires of the electric lights do not need to be replaced), and the wires they bought better, of course, or that sentence, if you can trust the quality of the developer's wires, some of them can also not be replaced (in fact, the wires of the general developers are also national standards). Generally, high-power sockets need 4 thick wires (such as electric water heaters, air conditioners, etc.), ordinary sockets and ground wires use flat thick wires, control wires use flat thick wires (in fact, ground wires can also use flat thick wires), and generally use two colors of wires to distinguish the zero wire (such as red for the live wire, blue for the zero wire).

Then, as with the renovation of the waterway, determine the location of various household appliance sockets and switch panels, including TVs, air conditioners, electric water heaters, refrigerators, range hoods, bedside lamps, etc., as well as Buddhist shrines, ground plugs under coffee tables, etc. In addition to the strong current transformation, there are also weak current transformations, including cable TV set-top boxes, broadband, etc., and it is determined in advance that the set-top box, router, and computer should be placed in **. In addition, there is also the transformation of the control circuit, such as how to control the lights of various dual-control switches and three-control switches, and how to place them in the first place for easy use and so on.

Then there is how to go the line, what kind of socket to buy, and so on.

There is a small place that needs special attention, and now many newly developed real estate projects have introduced optical fiber to the multi-** information box next to the entrance door, so the optical fiber cat can be placed in the multi-** information box in the future, so it is necessary to set up a socket in the multi-** information box to facilitate the optical fiber cat to get electricity. At the same time, the fiber optic cat needs at least two network cable ports to connect to the wireless router and the set-top box, so the location of the multi-** information box to the wireless router and the set-top box needs to be set up with two network cables + two RJ45 sockets, and at the same time, the network cables can be routed from the location of the wireless router to each room, and the RJ45 socket is also set to facilitate the desktop to connect to the network cable to access the Internet. If you want to install a fixed **, you also need to arrange the **wire and RJ11 socket.

It is necessary.

In fact, when it comes to hydropower retrofits, most users retain the water circuits that developers are equipped with. On the other hand, the quality of the water and electricity pipelines equipped by the developer is basically up to standard (especially **), and even better than the products purchased by some users.

Changing hydropower is not "changing hydropower", it is just a modification of the original water circuit - the hydropower points provided by the developer are fixed, and users need to change the number and location of these points according to actual needs to make them more practical.

Under normal circumstances, the rough house will be basically laid when it is delivered, but generally everyone will have some special transformations, so it will be necessary to carry out water and electricity transformation.

If you have already bought a house, at this time you must pay attention to the decoration problem, and at this time you must pay attention to the water and electricity renovation of your home, feel that the installation of water and electricity should be before the decoration, so that we can decorate our house more beautifully. So you must pay attention to these problems, and you must find a professional decorator.

I am also more curious about this problem, because I am not a professional renovation worker, so I have also checked some information and materials on the Internet, if you buy a new house. At this time, you must pay attention to the decoration problem, and everyone must pay attention to the layout of water and electricity, if the layout of water and electricity is not in place. At this time, your house is also prone to some problems, which may be prone to water leakage or electricity leakage, so you must find a professional person to decorate.

Therefore, the water and electricity renovation should be carried out before the renovation, so that we can decorate the house more beautifully.

If you have reached the age of marriage, you should buy a house at this time, but after buying a house, you must consider the decoration, but I think that decoration is not a trivial matter, if the house is not decorated well, you may be very sad at this time, so I think that decoration is a big thing, we must discuss it with the people in the family. Therefore, everyone must pay attention to the decoration problem, and be sure to find a professional designer.

Don't save money at this time, because everyone's situation may be different, so these problems are necessary to attract everyone's attention, so that we can decorate the house better. So you must find a professional worker, and you must find a professional designer.

It is possible to decorate directly without changing the water and electricity.

Commercial housing delivery is not a rough house.

Or a hardcover room.

The indoor water and electricity have been done, and there is no problem to meet the basic living needs, but whether it is done carefully or not, and whether the location of the design is reasonable depends on the developer. Some small developers develop properties that only seek short-term benefits.

In all stages of the implementation of the project are compressing costs, and even the design unit is not so professional, lack of consideration in the design process, the location of some switches and sockets is often more arbitrary, the number is seriously insufficient, it is not very convenient to use, and even affects the use of functions.

Is home improvement water and electricity renovation a must? What do you do? It is a must, before the water and electricity decoration, to determine the size of the furniture in each space. Because the size of the furniture determines that the socket and light are placed at the end and will not be blocked. Determine the size and location of the essential appliances in your home.

The renovation of new houses requires partial renovation of water and electricity. Because most of the new houses we bought are rough houses, our decoration is to renovate the rough houses. But this time, we will find that the water circuit in our new house is basically reserved in place.

For example, circuits, each room has basic functions of sockets, lights, switches. As for the waterways, it's different. For example, we may only have one water point in our kitchen, and one water point in our bathroom.

Therefore, for the waterway, it must be reorganized and transformed. As for the circuit, because the reservation point may not meet our requirements and needs to be partially modified. Therefore, the water and electricity for the decoration of new houses need to be partially renovated.

Why do hydropower retrofits? The developer's design in building houses is relatively general, and the construction quality of many water, electricity and heating parts is actually worrying. and personalized, convenient life.

Hydropower renovation should also make corresponding changes. For example, more and more household appliances require sufficient power supply. Some people want to move the location of the water, such as installing a washbasin outside the bathroom, installing a sink on the balcony, etc.

In addition, there are some old houses, and it is necessary to renovate water and electricity, otherwise there will be potential safety hazards in the future.

What should be considered before hydropower retrofitting? Before water and electricity decoration, it is necessary to determine the size of the furniture in each space. Because the size of the furniture determines that the socket and light are placed at the end and will not be blocked.

Determine the size and location of the essential appliances in your home, and look to the future. Even if you don't buy it now, you may buy it someday in the future. As a result, you don't reserve a track spot for them.

What should you do? Analogy refrigerators, sterilizers, microwave ovens, electric ovens, water purifiers, kitchen treasures, range hoods, smart toilets, air conditioners, etc.

For renovation, the renovation of water and electricity is very important. This part was the hardest, most costly, and most problematic in the whole renovation process. If you don't pay attention to renovation in the early stage, it will ruin your house in the future.

Therefore, those experienced old electricians remind everyone that when decorating water and electricity, as long as you pay attention to these details, there will be no problem no matter how long you live.

It is necessary to do, so as to better maintain the basic life, to avoid some dangers, according to their own life, reasonable installation of switches, pay attention to the problem of water supply.

Home improvement and hydropower renovation is a must, we have to replace some aging wires with new ones, and we must also observe the waterproofing situation.

Yes, home improvement and hydropower renovation is a must; It is necessary to determine the location of the water, the location of the unelectrocuted, and the location of the cabinet, the position of the wardrobe and the position of the bed.

The design of water and electricity in home renovation is very important and closely related to our daily life. We should not only pursue decorative effects, but also pay attention to practicality and safety. SoOnly do hydropower renovationWhat should we pay attention to in this way?

The quality of water pipes and wires, everyone knows that hydropower is a hidden project. Pipelines and water pipes are buried underground. It is very troublesome to repair at a later stage. Therefore, it is essential to pay attention to the quality of the water pipes when purchasing. It is recommended to choose a big brand for better quality and after-sales.

Nowadays, people can't live without appliances. There are electrical appliances and sockets are required. If there are fewer sockets in the design, it will definitely bring inconvenience to later life.

Before renovating the house, many ownersOnly do hydropower renovationIt is intended to redesign the route arranged by the developer. Because the wires used before were relatively thin, usually copper, and could not withstand high-power appliances. Therefore, it is advisable to replace thick wires when replacing water and electricity in bathrooms and kitchens where high-power appliances are often used.

If the owner doesn't understand, you can ask a professional electrician to help.

Televisions and computers are standard equipment in every home. Therefore, inOnly do hydropower renovation, the signal lines of the TV and computer cables must be designed at the same time. This avoids the arrangement of bright lines in the later stage, which affects the appearance.

Nowadays, many homeowners will put the washing machine on the ruined balcony. If this happens, it is advisable to add water and electrical pipes to the balcony for easy use later.

It isOnly do hydropower renovation

You can get it for free

1. Kitchen waterway renovation.

The waterway renovation of the kitchen mainly includes the faucet and the water heater, and the general family is that the kitchen and the bathroom share a water heater, so when carrying out the waterway transformation, we must think about the location of the water heater installation, so as to determine the location of the installation of the hot and cold water pipes and carry out the waterway transformation.

When installing, it should be noted that the height of the nozzle on the cold and hot water is consistent, the nozzle should be two centimeters higher than the wall, and the spacing between the hot and cold water pipes is 15 cm, which should be strictly implemented. The cold and hot water pipes are all into the wall, and the depth of the tank needs to be checked when slotting, and the cold and hot water pipes cannot be the same tank. The electric water heater generally needs to be fixed on the load-bearing wall, if the situation is special, it should be fixed on the non-load-bearing wall to make a fixed bracket, and the top layer should have enough space to do the fixed bracket, and it is necessary to communicate with the water heater manufacturer in advance to determine the location of the water heater outlet.

2. The toilet is absolutely defeated and the waterway is renovated.

There are many contents of bathroom waterway transformation, the installation location of washbasins, toilets, bathtubs and washing machines, whether hot water pipes are needed, and the sewer treatment of floor drains must be in place, otherwise it will cause backwater in the future. The installation position of the water meter should be convenient for reading, the distance between the water meter and the valve from the wall should be appropriate, and the dry storage should be convenient for use and maintenance. The water inlet and outlet of the toilet should be placed in a place where the view of the toilet can be blocked by the toilet.

The location of the spout should be determined according to the model, and it should generally be left in the middle of the toilet drain and 200mm to the left.

3. Circuit transformation of the living room.

The wires that need to be installed in the living room include power lines, lighting lines, air conditioning lines, TV lines, ** lines, computer cables, doorbell lines, etc. Generally speaking, on the edge of the sofa to leave the first line mouth, on the inside of the door to leave the doorbell line mouth, water dispenser, humidifier and other equipment to reserve the power port, in general, the living room should leave at least 5 power cord ports. It is best to install a switch socket panel for air conditioners, *** machines and other things that are in standby mode without pulling the plug, so that they can be turned off directly when not in use, and there will be no waste of electricity.

4. Bedroom circuit transformation.

Bedroom circuit renovation generally includes power cords, lighting wires, air conditioning wires, ** wires and computer cables. Reserve the power cord port above the bedside table, and use a 5-hole plug-in board with a switch, which can reduce the trouble of the bedside lamp not switching. The power terminal (hair dryer) should be reserved above the dresser; In addition, consider that there should be a reflector above the vanity mirror, and install a switch next to the wire box; It is best to use dual control switches for bedroom lamps, one installed on the outside of the bedroom door, and the other switch installed on the bedside table or the easier to operate part of the bedside, so that you don't have to get up to close the bedroom door when you sleep at night.