-
The temperature is too high and is mostly caused by the poor heat dissipation of the fan, generally the dust blocks the heat dissipation holes, generally disassemble and clean the machine, there are three steps to disassemble and clean the fan, one is to clean up the dust, the second is to add lubricating oil to the fan, and the third is to better dissipate the silicone grease. Notebook hardware questions answered.
-
You can use a metal heat sink block, or it is better to clean up the dust yourself, your temperature is estimated to be a lot of dust in the internal heat dissipation channel, or the fan is weak, you can listen to the sound of the fan, or feel the air volume of the air outlet.
-
Buy a fan for heat dissipation.,U-port.,Put it under this book.,It's still a little effective.。 It's not expensive, it's about 10 yuan cheap.
-
Send the original customer service to disassemble the machine for maintenance. There is a thing called "exhaust radiator", I don't know if you have used it? Extremely strong heat dissipation.
It is also possible to use a sponge ball for tennis lessons without a cooling pad and saw it from the middle. By the way, Volkswagen software on July has a special topic on heat dissipation. Hey, the current notebook manufacturers are all on time, just sell the appearance, and don't care about the inside.
Try not to play big games on the computer, and be careful not to burn the capacitors.
-
Clean up the dust at the fan in time. Buy a laptop cooling base. Reducing the number of open programs to reduce memory usage and CPU usage will reduce the temperature of your computer.
-
Disassemble the machine to check whether there is too much dust, and there is no debris blocking the air outlet.
-
If the laptop is out of warranty, you can choose to modify it yourself, disassemble it and replace it with a silicone pad, clean up the dust, or you can DIY and add some copper sheets and the like.
-
Online shopping. According to what you say, the machine is a problem, and the external heat dissipation can't be solved, so go fix it at 100 degrees. Otherwise, you can buy blue eggs and make your own breakfast every day.
-
When the computer is operating normally, the heat escapes to the surface of the machine, so it is recommended to place the laptop on a stable desktop. If you mistakenly place the computer on your lap or on the cushion of the quilt, it will affect the heat dissipation of the machine, resulting in a high temperature of the machine. For specific precautions, please refer to the user manual.
The ambient temperature will also have a certain impact on the temperature of the laptop itself, so the temperature of the laptop will be slightly higher than in other periods of time in summer.
The software may be biased at the time of detection and is not completely accurate and effective. You can observe whether the laptop in use frequently occurs blue screen of death due to overheating, and if there is no failure, you can use it with confidence. And ASUS laptops have hardware protection in terms of temperature control, which will automatically cut off the power when the system temperature is too high.
If the Blue Screen of Death fault caused by overheating occurs frequently, it is recommended to send it to the service center for corresponding testing as soon as possible.
-
If the temperature is high, it means that the heat dissipation is not good, the CPU processing speed is very fast, and the CPU capacity you use is relatively large, so you need to place the computer in a relatively empty place for use. If the fan doesn't work, you need to replace the fan.
If the laptop does get into the water, there must be a first aid before sending it for repair: >>>More
HP computer heat dissipation has always been bad, if it is summer the whole machine has a fever, you can steam eggs. >>>More
The construction of a desktop keyboard is not the same as that of a laptop keyboard. The ultra-thin keyboard used in laptops has small key contacts that are coated with conductive glue that triggers an electrical pulse with each press. If the key contacts seep water, the conductive adhesive dissolves, and the keys will naturally fail. >>>More
Addendum: Sorry, I was wrong. -- Press F8 when you boot up, select "Safe Mode with Command Instruction", and then enter "C:" in the pop-up DOS window >>>More
It is recommended that you use a USB flash drive to repair the system, and then consider reinstalling the system. Let's take a look at the following methods: >>>More