What should I do if the liquefied gas stove is changed to natural gas?

If the original gas stove is made of liquefied petroleum gas, then the hole diameter of its "gas outlet nozzle" (gas valve outlet) is general, while the use of natural gas should be, so if you have such hands-on ability, you can use the drill bit of the "straight handle twist drill" with specifications to reaming the gas hole (in order to consider the error during reaming, so the drill bit is not used directly). However, if you want to use LPG instead of natural gas, you will have to replace the valve to solve the problem. If you don't have this hands-on ability, no matter what air source you use, don't "act rashly" to ensure safety.

How to change the liquefied gas stove to the natural gas stove is as follows;

Liquefied gas stove to natural gas stove: 1. First find the nozzle installed on the valve, and then disassemble the gas stove panel with a screwdriver.

2. Directly remove the nozzle with a suitable wrench or pliers, and expand the nozzle to a suitable size.

3. Install the nozzle to the original place and tighten it, and test the nozzle with a lighter to test the leakage. Natural gas is a multi-component mixed gaseous fossil fuel, the main component is methane, and a small amount of ethane, propane and butane, no waste residue and wastewater are produced after combustion, compared with coal, liquefied gas and other energy sources have the advantages of safe and clean use.

Liquefied gas generally refers to liquefied petroleum gas. Liquefied petroleum gas (LPG) is a colorless volatile liquid obtained by pressurized cooling and liquefaction of natural gas or oil in an oil refinery. It is very susceptible to spontaneous combustion, and when its content in the air reaches a certain concentration range, it can meet an open flame.

Natural gas refers to all gases that exist naturally in nature, including gases formed by various natural processes in the atmosphere, hydrosphere, and lithosphere (including oilfield gas, gas field gas, mud volcanic gas, coalbed methane, and biogenerated gas, etc.). And people have long used the term "natural gas.""The definition is a narrow definition from the perspective of energy, which refers to a mixture of warp and non-warp gases naturally contained in the formation. In petroleum geology, it usually refers to oilfield gas and gas field gas.

Its composition is mainly warp and contains non-meridian gases.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose.

Villa Master.

The main component of liquefied gas is alkane and alkene, although its calorific value.

will be more gas than the sky.

High, but it needs a lot of oxygen when burning, so you should be very careful in the process of using it, otherwise there will be many safety hazards.

After the pipe enters the kitchen, it also depends on the layout of your kitchen, after all, the pipe is connected to the stove, and it must be punched on the countertop.

Install the purchased natural gas stove nozzle to the position of the raw material nozzle; Empty the gas in the original pipe, connect the pipe again, check whether the connection is tight, and prevent air leakage; Natural gas stoves are changed to liquefied gas stoves, and professionals need to change them, and liquefied gas tanks are used if there is no natural gas for a long time.

It is a professional who comes to the door to change the stove and only change the pipe joint behind the stove.

Due to the different pressures of natural gas and liquefied gas, cooktops cannot be used universally. However, the difference is very small, only the difference in the size of the nozzle, the diameter of the nozzle of the natural gas stove is larger, the diameter of the nozzle of the liquefied gas stove is smaller, and there is no difference in other aspects. To change the type of gas, just change the nozzle of the stove.

Natural gas stoves and liquefied gas stoves can change the outlet nozzle. But the effect is not as good as the power of the gas stove itself. Therefore, when purchasing, it is necessary to understand your own gas source and buy the corresponding natural gas stove or liquefied gas stove.

I used to live in the old community, and I happened to encounter the change from gas to natural gas, and the staff came, used a drill bit, drilled a few times in the gas stove, and said that the transformation was completed, and if it was reversed, the transformation from natural gas to gas could be completed. To change natural gas to liquefied gas, replace the core on the liquefied gas stove, do not need a gas meter, and replace the liquefied gas cylinder. There are three types of gas sources for lighters:

Natural gas, artificial gas and liquefied gas. Any air source should only be equipped with the right stove. Otherwise, it is easy to cause**.

It's dangerous. The difference in air source is not just the difference in the mouth. All the pipes under the stove are also different.

The natural gas stove can be changed to a liquefied gas stove, as long as the natural gas stove nozzle is replaced with a liquefied gas stove.

We just need to replace a lot of things directly, and it should also be better to change the channel of natural gas to liquefied gas.

The natural gas pipeline is blocked, and then buy a liquefied gas and connect your stove to the liquefied gas, and it is very simple to deal with it.

The natural gas pipeline should be completely dismantled, and the natural gas should be blocked, and then the liquefied gas stove should be connected to the liquefied gas pipeline, so that the transformation is complete.

You can just remove the nozzle and then take the gas stove apart and remove the top panel.

I'm going to get rid of the gas first, then I'm going to buy a new gas stove, and I'm going to buy a liquid gas tank underneath it, and I'm going to reconnect it to the new gas line, and I think that's going to be fine.

I think we should ask a professional master to renovate, and we must avoid gas leakage when renovating, and we must pay attention to safety.

I don't know how to transform, I don't usually know much about this aspect, you should ask a professional person and let a professional master guide you.

It can be changed, and the fumarole screw inside can be disassembled and replaced with the liquefier shape number, and the hole warp is smaller. Nothing else remains the same.

Usually, the natural gas stove and the liquefied gas stove are not universal to each other, so the natural gas stove is transformed and heated, and the components of the gas stove need to be transformed, but now, with the development of science and technology, the natural gas stove and the liquefied gas stove can be shared.

IntroductionCan I change to a liquefied gas gas stove? I don't think it can be remodeled, because of the natural gas pipeline, I accidentally remember that the pipeline is different, and the place where the pipe touches is also different.

OK. The main component of natural gas is methane, which requires less oxygen and more air when burning, so its gas outlet is smaller and the air inlet is larger, and the main component of liquefied gas is hydrocarbons and alkenes with more carbon, which is just the opposite of methane when burning, so its gas outlet is larger. The biggest difference between the liquefied gas stove and the natural gas stove is that the aperture of the nozzle of the liquefied gas stove is millimeters, and the aperture of the nozzle of the natural gas stove is millimeters.

Steps of changing liquefied gas stove to natural gas stove: 1. Go to the hardware store to buy millimeter nozzles and corresponding tools for natural gas. 2. Remove the millimeter nozzle on the liquefied gas fiber hood furnace, reaming the hole by hand with a tool, and change the aperture to millimeters.

3. Install the purchased nozzle to the position of the original nozzle. 4. Empty the gas in the original pipe, and then connect the pipe to dust, check whether the connection is tight to prevent air leakage. 5. Use the modified natural gas furnace to see if there is any abnormality.

Summary. Hello, dear, yes. The biggest difference between a liquefied gas stove and a natural gas stove is that the aperture of the nozzle of the liquefied gas stove is millimeters, and the aperture of the nozzle of the natural gas stove is millimeters, so if you need to modify it, you must replace the nozzle, and it is best to replace the burner head together.

Hello, dear, you can judge. The biggest difference between the liquefied gas stove and the natural gas stove is that the aperture of the nozzle of the liquefied gas stove is millimeters, and the aperture of the nozzle of the natural gas stove is millimeters.

Steps of changing natural gas stove to liquefied gas stove: 1. First go to the hardware store to buy 0 for liquefied gas. The 8 mm nozzle and the corresponding tools are slippery.

2. Remove the millimeter nozzle on the natural gas furnace, use a tool to manually sell the wax shrinkage hole, and change the aperture to millimeters. 3. Install the purchased nozzle to the position of the original nozzle. 4. Empty the gas in the original pipe, and then connect the pipe well, check whether the connection is tight to prevent air leakage.

5. Use the modified liquefied gas furnace to see if there is any abnormality. Kaibi generally does not recommend to change the natural gas stove to a liquefied gas stove, it can be used after changing the nozzle, but there are also potential safety hazards, such as the hose may be ruptured due to high pressure and cause gas leakage, and the gas combustion of the brother and grandson is not sufficient to produce carbon monoxide, etc., if you must change, it is best to ask the manufacturer of the stove, and ask a professional to modify it.

The method of converting liquefied gas to natural gas: the specific steps of the transformation are to go to the hardware store to buy millimeter nozzles and balancing tools for natural gas; Remove the millimeter spray leak stop on the liquefied gas furnace, use an electric drill and two drill needles of corresponding size to ream, and change the diameter of the hole to millimeters; Install the nozzle in situ, tighten it and test the leak, vent the gas in the original pipe, and then connect the pipe to check whether the connection is tight to prevent air leakage; Cover the gas stove panel so that the gas stove is changed.

My dear, you can find a professional to help you change it.

OK. The main component of natural gas is methane, which requires less oxygen and more air when combusted, so its gas outlet is smaller, and the air inlet is larger, and the main component of liquefied gas is hydrocarbons and alkenes with more carbon, which is just the opposite of methane when burning, so its gas outlet is larger.

The biggest difference between a liquefied gas stove and a natural gas stove is that the aperture of the nozzle of the liquefied gas stove is millimeters, and the aperture of the nozzle of the natural gas stove is millimeters, so if you need to modify it, you must replace the nozzle, and it is best to replace the burner head together.

1: To know what the nozzle is, the nozzle is generally made of copper, and there is a small hole in the middle, which is the nozzle.

2: Disassemble the gas stove panel, and use a screwdriver to remove all the screws on the panel to remove the panel.

3: Directly remove the nozzle and twist it with a wrench or pliers of the corresponding size. The burner is not in the way, because there is a spring under the damper, and if there is not enough space, the burner can be removed first.

4: Enlarge the nozzle, use an electric drill and two drill needles of the corresponding size to ream, the nozzle of the household gas stove is generally a large fire, a small fire. You can't drill the hole too big and the drill is crooked, it is easy to have yellow flames, and you can go directly to the hardware store to buy a natural gas nozzle and replace it.

5: Install the nozzle in situ, use a lighter to check the air leakage at the nozzle connection after ignition, and cover the gas stove panel.

1. Go to the hardware store to buy millimeter nozzles and corresponding tools for natural gas.

2. Remove the millimeter nozzle on the liquefied gas furnace, reaming the hole by hand with a tool, and change the aperture to millimeters.

It turns out that the liquefied gas stove can be changed to natural gas, and the method is very simple, you can get it for a few dollars, and you can save money.

It can be changed. The pressure and combustion ratio of liquefied gas and natural gas are not the same, and the nozzle of the gas stove needs to be replaced, and it is best to be modified by professionals.