What materials do I use to paint my own house What are the steps?

Go to the paint shop and buy soft-bristled brushes and paint, paint rollers and a plastic bucket, as well as sandpaper for carpentry and prepare a large roll of newspaper. Before brushing, pay attention to the floor covered with newspaper, pour the paint into a plastic bucket and mix some water according to the instructions, and then use a roller combined with a brush to paint the wall; After 24 hours, sand the wall with wood sandpaper again, and apply paint again. Don't go and buy putty, because it's a rented house, so it's dealt with.

If it is a cement wall bottom to buy, gypsum powder, putty powder, milky white rubber, masking paper, latex paint, sandpaper. If there are cracks, suspended ceilings, shed-level places and buy white cloth. If you want to mix colors, you have to buy color paste.

1 Remove the dust on the original wall 2 If there is a place where the skin has fallen off, take a putty knife to clean it 3 Scrape the putty where it needs to be repaired 4 Sandpaper 5 Brand latex paint mix with 10%-15% water and stir well 6 Brush the wall Technical points: 1 If you originally brushed lime or paint, and now you want to paint latex paint, you must first remove the original wall and scrape the putty again 2 If you want to paint a colored room, you can directly buy colored latex paint, if you redeem it yourself, you must redeem it at one time, otherwise there is a color difference, of course, The gradual color difference is also a decorative effect,-- if you like 3 The quality of the roller brush must be good The hair quality is moderate Dense and even, which affects the stucco effect 4 Brush the ceiling first, then the wall 5 Be sure to dry the first time and then brush the next time (hehe, I have a lesson, I will brush it if it is still wet, and bring the wall belt down) 6 Use force evenly 7 Brush the light color 2 times, if you want a strong color, you need to brush it 3 times to be even Note: Don't forget to cover the floor with newspaper and disposable plastic tablecloth, and bring an eye protection.

Hello landlord! Think of a cost-effective way to do this: first you take the uneven parts of the original wall and level them with putty or white, and it is better to scrape them all.

After drying, you can brush latex paint or paint after sandpaper sanding to remove ash, if conditions permit, it is best to brush 2 times, and you can brush 2 times after the first time is dry. As for tools: roller brushes, sticks, brushes, choking knives, sandpaper, ladders, etc., raw materials:

Putty, glue, white powder, cellulose, latex paint, paper tape strips, etc., such operations are estimated to be inexpensive, and you can do it yourself in 5-8 yuan square meters. Thank you and have a great day

From a professional point of view, there are several major steps for oilers to paint the wall.

If it is a rough house, the wall needs to be treated and alkalized to see whether it is a coastal city or an inland city.

1. The wall should be brushed with glue, which is the wall stiffener. The main function is to prevent moisture and increase the binding force with putty. Prevents cracking.

2. There are many kinds of wall decoration. Latex paint, diatom mud, wallpaper, soft packaging, etc.

The wall painting is generally latex paint. There are two ways to use latex paint: painting and spraybrushing. There are pros and cons. The spray brush effect is better, but the amount is slightly higher.

3. Process: putty needs to be beaten twice, and the third time belongs to making up. Latex paint:

Two primers and three topcoats. Some people don't play with the topcoat or just brush it once. The role of the topcoat is to reflect the aesthetics and the nature of the latex paint is reflected, scrubbing properties.

It can increase the life of latex paint.

Among them, the putty should not exceed 1 mm, and it is easy to crack if it is thick. If the wall surface is original and uneven, it will be treated with bricklayers according to the degree of unevenness. The yin and yang corners of the putty should be straight.

Make it yourself? Now it's all the embryo room. I'm afraid I can't shave it myself.

Dabai is required three times, and latex paint is generally three times. If you are not afraid that your wall is uneven, you can scrape it yourself, scrape it slowly, and try to scrape it as smooth as possible. Then use sandpaper to polish it well, and it is estimated that the effect is still passable.

One bottom and two sides are painted with latex.

First shovel off all the wall skin that is turned up, and the one that is not turned up is just sticky and not firmly to shovel, and you can scrape two with putty, because you are rented, there is no need to do it so well, and you don't need to do latex paint, pay attention to scraping a few more places with oil stains. Be sure to wait for the last one to dry before scraping it off.

Steps: 1. Remove the original scraped porcelain;

2. Scrape putty (generally three times) to survive; Sandpaper three times;

3. Brush the inner layer of wall paint twice (on both sides of large sandpaper).

4. Brush the surface paint again.

It is recommended that latex paint and you buy it at ease, to prevent two from buying, and the paint putty is not allowed to peel.

The old wall is first chiseled off, and then it can be plastered, if it is not chiseled, it cannot be erased.

If you will paint the wall, you should find a master.