What should I do if the watch glass gets dust? 5

There are two main reasons why watches are dusty. First, you should first check whether your watch mask is tight, whether there are cracks due to aging or the whole is loose with the case (ring). Because the watch is not well sealed, it usually enters the gray scale and enters the water.

The second reason is due to internal wear, as the ash on the dial does not come from the outside.

How long have you been wearing your watch? Usually, dust entering the watch dial gradually seeps in during long wear. If only fine dust is entered, it can be left alone without affecting the time of walking.

If there is a certain amount of dust entering the inner disc of the watch, it is necessary to pay attention, because the dust is extremely tolerant and can cause the movement to jam and run inaccurately. If there is a lot of dust in the watch, it is recommended to do a comprehensive oil wash and maintenance of the watch.

If you want to repair and maintain the watch, replace the watch accessories, or have any problems with the watch, you can click to consult.

After finding that the watch is dusty, you must not open the back cover to clean without professional guidance, you should find professional help or send it to a professional maintenance shop for cleaning in time, and regularly do waterproof testing and accuracy testing to ensure its normal operation. If only fine dust is entered, there is no need to clean it without affecting the appearance and use.

Repair the watch into the water, the watch goes fast. The watch replaces the battery, and the watch washes the oil. Watch movement maintenance, cleaning appearance, scratch treatment, custom straps, authenticity identification, diamond engraving, see the homepage.

Summary. Hello! If you are sure that this is a surface stain, the easiest way is to clean the watch with soap or soap, just like washing your hands, gently brushing with a toothbrush, the effect is better, especially where there are small seams.

If there is a stain on the mirror of the watch, it will not be wiped off, and it will come out again after a while, what is the reason?

Hello! If you are sure that this is a surface stain, the easiest way is to clean the watch with soap or soap, just like washing your hands, gently brushing with a toothbrush, the effect is better, especially where there are small seams.

The fingers rubbed and disappeared, and then they came out again.

According to the normal physical phenomenon, the stain on the surface will not be produced automatically, it should be the fog inside, you can see it clearly!

What to do with fog?

The main thing is that it is gone after a wipe, and it will appear again after a while.

Hello! If it appears automatically, you can put it on the table to observe it to see if it is a fog produced by your hands, if so, you need to check the sealing ring of the watch, many watches generally have this situation for 1-2 years.

Hello, glad to answer for you!

If the dust entering the dial of the watch is usually due to the gradual penetration during long-term wear, if it is a certain length of dust such as hair or acrylic fibers that enters the dial, it is necessary to pay attention, such dust is very likely to cause the operation of the stop mechanism movement. Do not easily open the back cover for cleaning, and bring the watch to a professional after-sales center for cleaning in time.

Daily maintenance of the dial:

1. If the watch is flooded or damp during its length, it is very easy to induce discoloration of the dial, or the paint of the dial cover peels off, which is characterized by more occurrences on the edge of the dial. Therefore, when wearing a non-professional diving watch, try not to know about rain, swimming, etc.

2. If the watch is placed or exposed to sunlight for a long time, all kinds of rays in the sunlight will make everything slowly change color, and the same is true for exquisite things, no one can escape. Expose your watch to the sun as little as possible.

Disassemble the back cover, carefully take out the movement inside, clean it with a small rag, and then put it back on.

It does not affect the use of care, and it is recommended that a professional repair shop repair repair shop repair it is used.

Go to the mobile phone store, it's hard to get it yourself.

Watch anti-dust protection and ash handling methods.

1.If the watch only gets into fine dust, we don't need to clean it up without affecting the beauty and use of the watch. However, if it is hair or acrylic fibers and other dust of a certain length that enters the watch dial, it needs to attract our attention, because such dust is very likely to affect the operation of the watch movement or even damage the movement.

2.When we find that the watch is dusty, do not easily open the back cover of the watch for cleaning, and send it to the maintenance and after-sales center for cleaning in time, and regularly do waterproof tests and timekeeping accuracy tests to ensure its normal operation.

3.At the same time, we should also pay attention to the watch in our daily life not to come into contact with chemicals. The waterproof watch is not cold water or hot water, so don't wear it to take a bath, avoid water vapor to ensure its waterproof effect, and then after adjusting the watch, remember to restore the watch handle and press it tightly to avoid dust entering.