-
The arc ball was first made by the Japanese, called "strong (rotating) arc circle (arc) topspin ball", Hong Kong and Taiwan.
There are also those called "arc balls". However, with the progress of equipment and technology, the speed has become faster, and the rotation strength has far exceeded the beginning, while the arc has mostly become low and flat, which seems to deviate from the meaning of the original term.
Due to the aerodynamics of the topspin ball.
Characteristics, the arc of the net is good and the hit rate of the ball is higher, and after falling off the table, it is more threatening than not turning the ball low and forward, and the curve ball has become a modern table tennis.
of mainstream technology.
The arc ball is different from the general topspin ball in its rotation intensity, but this is a qualitative concept rather than a quantitative concept, how many revolutions per second is the arc circle, how many revolutions per second is the general topspin, there is only a general understanding and no conclusion, perhaps the national team's "pull attack" is much more than the so-called "arc ball" of the average amateur.
The types of curve balls are divided according to the hitting method: forehand curve ball, backhand curve ball, side curve ball; According to the characteristics of rotation, there are: plus arc circle ball, forward arc circle ball, side rotation arc circle ball and non-rotating arc circle ball (false arc circle).
-
Curve ball, a kind of spinning ball, that is not an ordinary spinning ball, the most powerful speed can exceed 100 revolutions per second!
-
The swing force rushes forward, the thin rubbing ball is in the middle, the thinner the more it turns into an arc circle, and the wiping surface should be wide and the force is heavier.
-
Forehand Circle, Backhand Circle, Sideways Circle; It is distinguished by the characteristics of rotation.
-
It's a way to play the ball.
-
The explanation of the words of curveball is: table tennis technical noun. An offensive technique with very strong topspin.
Action: Rub the racket against the middle or upper middle of the ball, and exert force with the arm upwards or forwards to make the ball have both strong rotation and a certain arc. It is characterized by large impulse, strong rotation and many changes.
The explanation of the words of curveball is: table tennis technical noun. An offensive technique with very strong topspin.
Action: Rub the racket against the middle or upper middle of the ball, and exert force with the arm upwards or forwards to make the ball have both strong rotation and a certain arc. It is characterized by large impulse, strong rotation and many changes.
Pinyin is: húquānqiú. The structure is:
Arc (left and right structure), circle (total enclosed structure), ball (left and right structure). The phonetic pronunciation is: 一 .
What is the specific explanation of the curveball, we will introduce it to you through the following aspects:
1. Citations and explanations [click here to view the details of the plan].
Table tennis technical terms. An offensive technique with very strong topspin. Actions:
Rub the racket firmly against the middle or upper middle part of the ball, and force the arm upwards or forwards so that the ball has both strong rotation and a certain arc. It is characterized by large impulse, strong rotation and many changes.
2. Network Explanation.
The Japanese table tennis team invented the curveball play, which is a strong topspin ball that is characterized by both strong attack and stability. Since it has very strong spin, it is a separate category from the traditional topspin ball, although it is an upspin ball. According to the direction of the shot, the curve ball can be divided into two types:
Forehand arc sedan car, backhand arc ball. In the forehand arc circle, it is divided into plus arc circle, forward arc circle, side spin arc circle, straight plate positive rubber arc circle (commonly known as small top spin) and non-rotating arc circle (commonly known as false arc circle).
Idioms about arc trap filial piety balls.
It is known all over the world as the day of the arc, the mulberry arc, the determination of the circle, the dotted peach arc, the thorny arrow, the trap, the trap, the trap, the nourishment, the mulberry arc, the artemisia arrow.
Words about curveball.
Set the arc of the peach, the arc, the spines and arrows, the thought of the cup, the world's famous trap, set the trap, rub the edge ball, the snowball, the mulberry arc, the artemisia arrow, the trap and play the set.
-
Summary. Hello, we are happy to answer for you The most basic principle of the curved ball is to rub the ball to make the ball spin strongly, which changes the flight path of the ball in the air and the behavior after landing. When pulling the curved ball, the friction point is first selected according to the type of incoming ball.
In the process of rubbing the ball, if the incoming ball is an upspin ball, generally in the descending period of the incoming ball, the paddle surface obliquely rubs the middle and upper part of the ball, the stronger the upspin of the incoming ball, the more oblique the paddle surface, the higher the friction point, and the greater the forward trend of swinging. If the ball is a downspin ball, it should be rubbed against the lower middle part and pulled forward and up.
Hello, we are happy to answer for you The most basic principle of the curved ball is to rub the ball to make the ball produce a strong rotation, which changes the flight path of the ball in the air and the behavior after landing. When pulling the curved ball, the friction point is first selected according to the type of incoming ball. In the process of rubbing the ball, if the ball is topspin, generally in the lower bucket of the ball, the paddle surface obliquely rubs the middle and upper part of the ball, the stronger the upspin of the incoming ball, the more oblique the paddle surface, the higher the friction point, and the greater the forward trend of swinging.
If the ball is a downspin ball, it should be rubbed against the lower middle part and pulled forward and up.
Classification: According to the different ways of rubbing the ball (different friction points and friction directions), the flight path of the ball and the behavior after falling off the platform also have different characteristics. Learning steps for curveball:
1.The first practice of the arc ball should start from the high hanging arc circle, and the practitioner should use the power of kicking the ground and twisting the waist to swing the racket to lift the arc ball forward and upward, at this time, do not add too much strength, just pull the ball to the table. The arc of this ball is high and not very threatening, and the main purpose of the practice is to feel the sensation of the racket rubbing against the ball for a moment.
2.When the forward arc circle has been able to pull out a good quality high-hanging arc ball, you can practice the forward arc circle. It moves slightly differently than a high-hanging hoop ball.
The differences are: 1) the ratio of friction and impact, the forward arc ball pays more attention to rotation, so the angle between the racket surface and the table is smaller when pulling the forward arc ball, so that it can be sharpened to reduce the impact component of the ball and the racket to increase the rotation force of the ball. 2) Swing direction, when pulling forward to punch the arc ball, the swing direction is more forward, and its main purpose is mainly to reduce the impact between the racket and the ball.
3) Add the arc circle ball When the high hanging arc ball and the forward arc circle ball are practiced well, you can experience the instant feeling when the racket rubs against the ball. At this time, when practicing the arc ball, you only need to pay attention to the side and back of the rubbing ball when rubbing the ball. In the process of pulling the ball, pay attention to the role of the wrist.
Precautions when practicing curveball:1Action The basic movements of these three types of curve balls are similar, except that the part of the ball is chosen at the moment of hitting the ball is different.
The front arc circle rubs the upper back of the ball, and the high hanging arc circle rubs the lower back of the ball, and the angle of the racket can be adjusted at this time. 2.Which arc technique to choose In the actual battle, the arc technique should be used comprehensively.
Under normal circumstances, if the incoming ball comes out with a certain downspin, a high hanging arc circle can be used to return the ball; If the rotation of the incoming ball is not strong and the speed of the incoming ball is slow, you can use the forward arc circle ball to destroy the kick fight.
-
In modern table tennis, the curve ball has become a key offensive technique because of its strong offensive power and stability.
One. Kick the ground. Many golfers are very awkward in the process of pulling the ball, and some of them do not lift the heel of their right foot when they kick the ground, and they blindly think that the right foot can kick the ground, but they ignore a very important place, that is, the purpose of kicking.
The purpose of the kick is to move your center of gravity, generally speaking, after the right foot pushes the ground, the center of gravity will shift to the supporting foot and the left foot, and the center of gravity will also move forward and left.
Two. Twist your waist. Probably now that life is rich, many amateur players have a big belly and a round waist, and they can't see their waists, but if you want to pull out a high-quality arc ball, you must borrow the power of your waist, maybe practicing table tennis really has the effect of slimming your waist.
In the link of twisting the waist, you must not simply twist the waist, in case the action is too big to flash to the waist, it is not easy to do, at this time you must borrow the power of the ground to twist the waist.
Three. Swing arm. Here we are referring to the big arm, the swing arm of the amplitude varies according to your lead position, for table tennis enthusiasts who lead the racket relatively backward, the amplitude of the swing arm is larger than the lead of the front.
No matter how big the swing is, the direction of the swing of the big arm is generally to swing at a fixed angle towards the front and up, generally swing parallel to the outside of the body, and be sure not to raise the elbow when swinging, otherwise the action will be deformed and the result of pulling the ball down the net.
Four. Tucked in the forearm.
When the upper arm is swung parallel to the outside of the body, the lower arm is quickly tightened forward, but the lower arm should not be too tight, and the lower arm should be tightened along the inertia of twisting the waist and swinging the upper arm. The stopping position of the forearm is probably located in front of the body, the height is generally level with the eyes, and do not wave your head, because you should quickly resume the action after pulling a curve ball and continue the action of the next curve ball.
Five. The wrist is adducted.
This technology is very demanding for players, the general amateur players can pull out a higher arc ball through the above four steps, but generally pull out the ball arc is relatively long, if you want to make the arc ball shorter, you must add the strength of the wrist, you can refer to the German player Boer's forehand arc ball action.
-
When pulling the arc circle, you must aim at the ball when swinging the racket with all your might, make an accurate impact action, do not hit the ball head-on, and do not touch the ball too thinly, and must learn to pass the power of the whole body through the racket in an instant, forming a force that enables the ball to rotate at high speed.
-
When pulling the arc circle, be sure to aim at the ball and make an accurate hitting action when swinging the racket. Must not hit the ball head-on or touch the ball too thinly. You must learn to pass all your body power through the racket to form a ball in an instant. The force that causes the ball to spin at high speed.
-
Be sure to master the essentials of the action, don't be nervous first, be sure to relax the action, don't be too stiff, the action of attacking the ball must be slightly larger, the back arm must be pulled, and the position of the shoulder should be relaxed and restored.
The essentials of pulling the arc ball: the feet are separated, the knees are slightly bent, the center of gravity is placed on the inside of the front foot, the left foot is in front, the heel is slightly raised, the body is slightly turned to the right, the wrist is abducted, pulled back, and the paddle forms a horizontal position. Lead the shot to the right rear, when the ball jumps to the high point or descends in the early stage, touch the middle or middle of the ball, the waist and hip drive the upper arm and forearm to swing from back to front, and immediately press forward and upward at the moment of hitting the ball, push the ground the inside of the right foot, extend the knee, and the forearm should quickly pronate and contract, coordinate friction, and shift the center of gravity from the right foot to the left foot. >>>More
To practice the curve ball, start with the most basic forehand attack (this is even what the national team does every day) Find a sparring partner....Then practice the pull: straight, midline, diagonal, forehand and backhand crosses (including footwork, shifts, sideways) ......to practice pulling the topspin, downspin (or even sidespin)....You can also practice pulling the ball, pulling the ball, pulling the ball to the net to practice explosiveness...There's a lot to learn about arcs alone, but remember to start with the basics. Step by step....It is important to know clearly that the motto for playing table tennis is: >>>More
Hello this golfer, I also play arc circles, share my experience I hope it will help you....In fact, to make a curved ball, of course, it depends on rubber friction (astringent glue relies on a soft sponge to eat the ball)....The reason for the arc out of bounds is because the racket rubs too much upward, but the swing friction is too low and the ball will not reach the net. In fact, the correct arc posture must first achieve the center of gravity of the body forward (slightly press the lower body)....Hold the racket about 45 degrees and pull forward (don't pick up, this is a posture problem, many people start to deform the gesture after pulling the first three boards, so the correct posture must be proficient, and it will be very helpful to swing the racket every day to practice pulling the ball 50 to 100 times)....When the arc is pulled, the paddle is tilted forward, and the force is exerted when it touches the ball. You can only hear the sound of the rubber rubbing the ball and there is no sound of the bottom plate loading, and the arc ball pulled out in this way is spinning and rushing at the bottom. >>>More
Movements, standardization, to be linked according to the above action essentials, this is the basic skill, although in the game almost all non-standard actions. What you need to master is to convert the forward thrust into rotation, friction between the racket and the ball, and try to increase the contact surface and release time between the racket and the ball to form a rotation. The classification of the arc ball, the high-throw arc ball with the addition of spins, and the forward arc ball, I think you can also experience the difference. >>>More
When you tell someone that you can definitely do something, it's best not to promise it lightly.