Welder working hours and rest

You'll have to ask your boss.

Legal analysis: Although welders are a special type of work, the labor law does not stipulate that the working hours of demolition and disturbance cannot exceed 6 hours a day. Special types of work can be retired early after 8 years of work (55 years old for men and 45 years old for women).

Legal basis: Labor Law of the People's Republic of China Article 36 The State implements a system of working hours in which the daily working hours of workers shall not exceed eight hours during travel and the average weekly working hours shall not exceed 44 hours.

1. Definition of electric welder: a person who operates welding and base fluttering equipment to weld or cut metal workpieces.

Second, the welder type of job positioning:

Welder Shoufeng Coarse is a technical type of work, a type of mechanical manufacturing and machining work, and a very important position.

3. The professional and technical level of welders:

According to their own welding skills, welders can obtain the technical titles of primary, intermediate, senior, technician and senior technician through the welding skills examination and obtain the technical grade certificate issued by the state.

1. Strictly obey the work arrangement of the team leader, implement the production according to the production plan, and complete the production task with quality and quantity; 2. Obey the process guidance of technical personnel, strictly implement product quality standards and process regulations; 3. Strictly follow the requirements of production process documents, safety and equipment operation procedures, do not operate in violation of regulations, and achieve "three no harms" in a timely manner; 4. Reasonable use of auxiliary materials, control the consumption of auxiliary materials, save electricity and water, save energy and reduce consumption, and strictly control the cost in the process of production and processing; 5. Control the processing process, strictly process the self-inspection and self-division of the products, so that the unqualified products do not flow in, and the unqualified products do not decentralize; 6. Solve and report the abnormal situation in the production and processing process in a timely manner, and request for processing; 7. Have the obligation to put forward improvement suggestions for unreasonable and non-standard parts such as technical drawings and process documents, and shall not continue to operate and process knowing the error; 8. Keep the technical drawings, process documents and tooling and measuring tools, and pay attention to technical confidentiality; 9. Carefully inspect the production of filial piety code, maintenance and maintenance every day.

Welder is a type of work that uses appropriate welding methods, reasonable welding processes, appropriate welding equipment, and uses fillers of the same material or different materials with the base metal or even without fillers, and uses heating or pressurization or both heating and pressurization to closely connect metal or non-metallic workpieces.

Welder Duties. 1. Weld the products arranged by the supervisor every day;

2. Maintain and maintain the machine before and after the shift every day, and sort out the site for 5S;

3. Follow the MCG process standard for operation; Carry out quality inspection on the input parts to ensure the quality of the output assembly or sub-assembly; Report product defects to the section leader;

4. Report the failure of the tool for the construction of the section leader; Responsible for the cleaning and lubrication of fixtures and tooling to ensure that the remaining daily holes are stored correctly. Thank you.

To meet the standard of employment, argon arc welding is generally one and a half months to two months, and the two-hand cooperation is half a month longer than the second welding time.

It takes about 45-60 days to start learning from 0. If you want to work as a welder, you must have a welder's certificate, which is as important as a driver's license to drive. The scope of work of welders is relatively limited, and welders are only used in the workplace of the unit.

The welding certificate is mainly divided into two parts: theory and practice. How long does it take to get the welding certificate after the exam? If you pass, you can get it in about 30 days.

The argon arc welding welder training course is generally set up with 15 days - Sun Zhen - 3 months of training spine course, to learn welding technology, must rely on the welder certificate, that is, the operation certificate, the general training school welder course has two parts: theory and practical operation, the selection of welder school to choose it to practice more, after all, this is a cherry blossom regret technical work.

How long does it take to learn to be a welder is as follows:

Welding training is generally seven days, as long as you learn carefully, including theory and practice, you can basically learn, and you can get a welder certificate, although not too fine, the basic work with low requirements can still be competent, if you don't need a certificate, you can learn the basic operation in two or three days, but there is no theory, can not be qualified for the work with high welding requirements.

How do you learn to be a welder?

We need to know what electric welding is first? Electric welding is a welding operation that uses the welding rod to melt the gold finger at high temperature through the arc and melt the place where the land-based parts need to be connected.

If you want to learn electric welding, you should first learn mechanical drawing, be able to understand drawings and welding symbols, understand how to weld, etc., and master the material structure, welding principle, operation process and actual operation methods and testing.

When welding, the welding rod and the iron plate are kept at an angle of 45 degrees, which is conducive to the uniform distribution of molten iron, and the weld is smooth.

When welding, the hand needs to be kept stable and welded, and the arms must be clamped to avoid shaking, so that the welding can be uniform and beautiful. When welding, it is generally used to weld zigzag and dot type, so that the welded seam texture is clearer.

When performing the upward welding operation, because the molten iron is easy to fall, it is necessary to take the form of spot welding, so that the sintering will be more firm. At the end of the circle, when the electrode is moved to the end of the weld, it should move in a circle at the arc pit until the arc pit is filled and then the arc is broken.

When the electrode is replaced or the arc is stopped temporarily, when the electrode is moved to the end of the weld, it stops at the arc pit for a short time, slowly raises the arc, and then leads to the base metal groove at the edge of the weld. At this time, the molten pool will gradually shrink, and there will generally be no defects after solidification.

The above are just the basic theoretical knowledge and skills of electric welding, but these need to be mastered slowly in theoretical and practical teaching, and skillfully complete a process of technical requirements.

In this process, first of all, we must learn with a vain heart, remember the key points and difficulties of the technology, as well as the techniques needed in welding, and the basic knowledge must be learned and practiced with heart to meet the basic requirements of welders.