How to do a good job of anti slip treatment on the ground?Anti slip treatment of the ground

The use of anti-slip fluid to make the ground effectively anti-slip, anti-slip fluid is a kind of product coated on ceramic bricks, stone and other ground materials, playing an anti-slip role. It is an anionic surfactant and is a water-soluble product. The principle is that this liquid penetrates into the surface of the ground material, and when it is in contact with the sole of the foot, it forms a suction cup to achieve the purpose of anti-slip, and the friction coefficient is reached, and the best effect is used on wet ground.

According to various floor materials, it is divided into marble anti-slip fluid, ceramic tile anti-slip fluid, wood floor anti-slip fluid, terrazzo anti-slip fluid and other varieties. The latest products are environmentally friendly, VOC-free, and harmless anti-slip fluid products.

Organic resin art landscape, class effective anti-slip. The anti-slip ground of organic resin art landscape is a mold that uses organic resin mortar to make a special mold with a certain artistic style, and prepares a mold with a strong three-dimensional sense and artistic landscape.

This kind of ground has excellent weather resistance, anti-slip abrasion resistance and durability, and is suitable for occasions with a large amount, especially for anti-slip after rain.

Anti-slip treatment for stair treads. The tread surface should be walkable, wear-resistant, non-slip and easy to clean. The practice of the ground floor of the same building is basically the same.

Commonly used are cement mortar surface layer, terrazzo surface layer, stone surface layer, cylinder brick surface layer, anti-slip floor tile surface layer, carpet surface layer, etc., such as in order to avoid pedestrians slipping when walking, the tread surface layer, especially the largest amount of stair tread surface should be provided with anti-slip strips, and at the same time play a role in protecting the tread angle.

The anti-slip strip is usually located close to the tread, 2 3ram higher than the tread, but it should not be too high, otherwise it will cause inconvenience in walking. Commonly used anti-skid strip materials include cement iron filings, corundum, metal strips (cast iron, aluminum strips, copper strips), ceramic mosaic tiles and so on.

Road anti-skid treatment. In order to improve the quality of high-grade road cement and pavement and ensure the safety of driving, it is necessary to study various effective anti-skid treatment technologies. The anti-skid treatment measures of cement pavement can be divided into two categories according to the timing of their implementation:

It is a treatment process such as brushing (groove), embossing (groove), groove, acid etching, hairing, cold bonding and asphalt overlay, which provides anti-slip resistance by mortar layer or fine aggregate bonded to the road surface. It is mainly a construction process such as bare stone and stone inlay that provides anti-slip resistance from the outer coarse aggregate. For the first case, in order to obtain a good anti-slip effect, it is necessary to choose suitable wear-resistant, anti-slip fine aggregates (such as clean natural sand, quartzite, sandstone, granite, etc.).

Summary. Hello dear <>

The ground anti-slip treatment methods include:1Spraying anti-slip paint:

Spraying a layer of non-slip paint on the ground can increase the friction of the ground and prevent slipping. 2.Install the non-slip mat:

Installing an anti-slip mat on the ground can increase the friction of the ground and prevent slipping. 3.Polishing the ground:

Grinding the ground can increase the roughness of the ground, increase friction, and prevent slipping. 4.Install the anti-slip strips:

Installing anti-slip strips on the ground can increase the friction of the ground and prevent slipping. It is necessary to choose the appropriate ground anti-slip treatment method according to the specific situation.

Anti-slip treatment of the ground

Hello dear <>

The ground anti-slip treatment methods include:1Spraying anti-slip paint:

Spraying a layer of anti-slip paint on the ground can increase the friction of the ground and prevent slipping. 2.Install the non-slip mat:

Installing an anti-slip mat on the ground can increase the friction of the ground and prevent slipping. 3.Polishing the ground:

Grinding the ground can increase the roughness of the ground, increase friction, and prevent slipping. 4.Install the anti-slip strips:

Installing anti-slip strips on the ground can increase the friction of the ground and prevent the bucket mold from slipping. It is necessary to choose the appropriate ground anti-slip treatment method according to the specific situation.

The purpose of the ground dust ridge slip treatment is to increase the friction on the ground and prevent people or vehicles from slipping on the ground or wild rubber slipping, so as to ensure the safety of personnel and property. In some places that need to be anti-slip, such as public places, factories, hospitals, schools, shopping malls, etc., ground anti-skid treatment can effectively reduce the occurrence of accidents and improve the safety of personnel and property.

The methods of anti-slip treatment of floor tiles are: painting tile anti-slip fluid, laying carpets, and replacing tiles.

1. Brush the tile anti-slip liquid. Tile anti-slip fluid is a chemical synthesis product, which can penetrate into the inside of the tile, form a pit on the surface of the tile, improve the anti-slip ability of the tile, and can be used on the surface of various tiles such as glazed tiles, vitrified tiles, and bucket polished tiles. When applying anti-slip fluid, we need to clean the ground stains first, and then apply anti-slip liquid on the surface of the floor after it is clean and dry.

Tile anti-slip fluid can play a better role in preventing rock beam slippage on the ground with water.

2. Lay carpets. The floor tiles are too slippery, we can lay carpets on its surface, the carpet has the advantages of high friction, comfortable feet, good decorative effect, etc., the carpet on the floor tiles can avoid us from slipping when walking, but we need to clean and take care of the carpet frequently.

3. Replace the tiles. The floor tiles are relatively smooth and easy to fall, we can also remove the floor tiles and re-lay the floor tiles with good anti-slip effect, for example, we can pave tiles such as full-body tiles and antique tiles. Although the replacement of tiles with good anti-slip effect can effectively solve the problem of slippery floor tiles, its cost is relatively high.

How to prevent wooden floors from slipping:

1. You can clean and wipe it with a soft dry cloth, it will not be so easy for the wooden floor to slip, and the floor will become brighter.

2. Keep the floor from sticking to large particles of impurities, clean the floor first, then wax, and wipe it after a while.

3. For waxing the floor, you can use non-slip wax, or use some soft cotton slippers (cotton bottom), which can increase friction, do not wear rubber and plastic slippers, and soft-soled slippers should also be washed frequently.

4. Wipe with an oil-based thinner (such as rosin), but this method will cause a certain degree of damage to the floor, which will make the floor dull, and professional help is needed when using it.

5. Some people think that the wooden floor is slippery after the floor is waxed, so it is good to clean the floor at this time. If there is wax on the surface of the floor, the wax can be removed with wax water and then cleaned; Then apply an anti-slip agent, which should be applied evenly. If there is a dry surface during the process, it should be moisturized in time.

Wait until you feel the resistance in the test, then wash it with water and then dry it naturally for 1-2 hours.

In order to restore or improve the anti-slip ability of the ground, there are three methods of anti-slip treatment of the ground:

Method 1: Use anti-slip fluid to prevent slip, the anti-slip fluid can penetrate into the inside of the ground material, and when the ground is in contact with the sole of the foot, it forms a suction cup to achieve the purpose of anti-slip, and the best effect is used on wet ground.

Method 2: Use organic resin to artize the landscape ground to be non-slip, and this kind of ground has excellent weather resistance.

Anti-slip, abrasion resistance and durability, suitable for occasions with large amounts, especially for anti-slip after rain.

Method 3: Use wax removal water to prevent slipping, if there is wax on the surface of the ground, the wax should be removed with wax removal water first, and then cleaned.

Anti-slip tricks for slippery floors.

1. Lay carpets.

Carpet is laid on the ground with high frequency of use, which can increase the friction of the ground and absorb some moisture. Or you can sprinkle some flour on the floor after last night's cleaning and sprinkle the flour on the floor with a broom.

Sweep it away, and some of the flour left on the floor at this time will also have a non-slip effect.

2. Cleaning. If the floor in the dining area is slippery, it is most likely due to stains or grease on the floor. Add an appropriate amount of detergent and alcohol to the hot water for mopping, so that the grease stains on the floor can be cleaned quickly.

After cleaning, the floor can be dried, and the dry floor is less slippery.

There are three ways to choose anti-slip floor tiles, carpet laying and carved patterns.

1. Choose non-slip floor tiles, it can be said that this method is also the most direct method;

2. If it is a living room, if you want a good anti-slip effect, then you can consider laying a layer of carpet on it;

3. Use the machine to polish the floor tiles, and you can also carve some patterns on them, which can solve the problem of anti-slip.

Maintenance method of floor tiles

1. Floor tiles can also be waxed regularly, and once every 3 months is the best. The gaps between the bricks should be cleaned with decontamination cream from time to time, and then a layer of waterproofing agent should be brushed on the gaps with a brush to avoid the growth of mold.

2. The daily cleaning of floor tiles can be cleaned with detergent, soap, and a mixture of ammonia and turpentine, which can make the floor tiles more clean and translucent.

3. If there is tea, coffee, beer, ice cream, grease, etc. on the floor tiles, you can scrub them with sodium hydroxide or potassium bicarbonate solution in time.

4. If there are ink, cement and other pollutants on the floor tiles, a diluted solution of hydrochloric acid and nitric acid can be used.

5. If there are contaminants such as paint and coating on the floor tiles, use special cleaners.

6. If there are slight scratches on the surface of the floor tiles, you can apply toothpaste to the scratches and wipe them with a soft dry cloth to repair them.

The treatment of anti-slip on the ground is as follows:

Clean up the premises and wash the floor. (Note: If there is wax on the surface of the ground, the wax should be removed with wax removal water before cleaning.)

Shake the bottle back and forth several times, and then spray the ground anti-slip agent evenly or paint the ground with a sponge, and the brush should be even, if there is dry surface, it should be moisturized in time. After waiting 8-15 minutes, wash once with clean water and gently scrub with a brush or sponge.

After the anti-slip treatment is completed, it will be cooled and dried for 1-2 hours, and if necessary, the water will be moistened, and then it will be used. Once the above procedure is complete, you will notice a significant difference in the anti-slip effect from before. It can be processed at any user's convenience, and generally small and medium-sized areas can be completed in a few hours, and the unit can operate normally, minimizing inconvenience.

Advantages of anti-slip treatment on the ground:

The user only needs to provide the power supply, water source and drain required for treatment. After anti-slip treatment, it will not affect the aesthetics and cleaning and maintenance of the original floor. The effect is obvious after the anti-slip treatment of the ground, and the service life is long.

In order to maintain the long-lasting effect of the anti-slip treatment on the floor, subsequent cleaning and maintenance work is extremely important.

The non-slip treated floor needs to be cleaned frequently, regularly sprinkled evenly with tile cleaner or wetted with a flat mop, and then brushed with a long-handled brush or floor cleaner. Then rinse with clean water, and finally wipe dry with a clean mop or wiper or suction machine.