What s going on with my computer s drive letter mess.? How was it solved?

It's very simple, right-click on My Computer, then select Manage, select Disk Management in the dialog box that opens, and then right-click on the drive letter you want to change.

Change the drive name and path.

In the dialog box that pops up, click Change.

Hehe. And then.

If you want to change your disk symbol, you can change it to whatever the disk.

First of all, how chaotic it is. If the disk name is confused, you can change its name yourself. If the disk location is confused, you can open "My Computer" > Right-click > "Arrange icons" in the blank space > select "Type" and "Arrange by Group".

Go to the Control Panel, Manage Tools, Computer Management, Disk Management, Change, Change Drive Letter, OK.

You right-click on my computer and click on the management to click the mouse to the disk you want to change, right-click, and then click Change.

Select the one you want to change and confirm it.

Tool Correction Method.

This method uses the drive letter modification function of the partitionmagic tool to adjust the disk drive letter confusion, and it is almost applicable to the drive letter confusion caused by various reasons; Here's how to use the partitionmagic tool to fix drive letters:

First run the partitionmagic program, then select the chaotic target drive letter in its main interface, and right-click it, from the pop-up shortcut menu, execute the "Advanced" "Modify Drive Letter" command, in the subsequent settings window, select a new disk partition symbol, then click the "OK" button, then click "General" "Apply Changes" button, and finally according to the prompts of partitionmagic, Reboot your computer system and you will be able to change the messy drive letter to the specified drive letter. Similarly, you can resize other disk partitions that are messing up with drive letters to the specified drive letter one by one.

Hard drive shutdown method.

This method is to temporarily shut down the disks other than the main hard disk by modifying the CMOS parameters, so that the Windows system will automatically rearrange the partition symbols of all hard disks according to the partition order of the main hard disk and the slave hard disk. However, this method also has a fatal drawback, which is that under DOS, you will not be able to use anything from the hard drive. When using this method to correct the scramble drive letter, you can follow the following steps:

First, connect multiple hard disks to the computer according to the master-slave relationship according to the need, and then turn on the computer power to enter the CMOS parameter setting page. Then select "Standard" in it

cmosfeatures" function option, and adjust the parameter of the slave disk setting item in the options page to "none";

Next, open "Advanced."

biosfeatutes" option page and designate the system's boot hard disk as the primary disk;

After completing the above settings, save the CMOS parameters, and then restart the system once, so that the drive letters of the computer hard disk will be arranged smoothly according to the master disk first and then the slave disk.

The drive letter is the identifier of the DoS and Windows systems for disk storage devices.

with"b："These two disk letters are used to represent floppy drives, and the early floppy disk sizes are 8 inches, 5 inches, inches, etc.

Hard disk devices, on the other hand, start with the letters c:, and work their way up to z:. For UNIX and Linux systems, there is no concept of drive letters, but the concepts of directories and paths are the same.

The drive letter convention for a disk is:

Floppy disks are A disk and B disk, the drive letter of the hard disk and the optical disk is from the C disk to the back, the name of the first logical hard disk is C disk, which is represented by "C:", if the system is equipped with multiple hard disks or a physical hard disk is divided into multiple logical hard disks, the disk letter can be "clear C:", D:

e：”、f：”、g：

Wait. The drive letter of the disc should be placed after the hard disk.

Hard blind disk symbol turning red can cause harm to the computer:

The reason why the system drive letter turns red is that the storage space of the hard disk is about to run out, and the storage capacity of the system disk has almost reached the warning line of the maximum storage of the hard disk.

Hard disk hardware is an independent hardware answer spine, the computer's operating system is installed in the hard disk, the hard disk red disk will have a certain chance to damage the computer operating system, and the hard disk letter turning red also has a certain chance to cause hard disk hardware damage.

This is what we often call "bursting" in our lives, and turning the hard disk letter red can lead to slow system operation and data loss on the hard disk. A reddish drive letter or a damaged hard drive will not cause damage to other hardware on your computer.

Click Start - Control Panel - Performance and Maintenance - Management Tools - Computer Management - Disk Management, right-click on the wrong disk, open Change Drive Name and Path, and then click Change, change it to the drive letter you need, and exit after confirmation.

What is drive symbol confusion??? As long as the drive letter is set in the computer, it will not change, unless it is poisoned, or it is artificially modified The drive letter is recommended that you right-click on my computer, select Management, and then click Disk Management, in which you can set all the drive letters yourself.

Right Jian My Computer Open the Management option Select Disk Management and then see all the drive letters, except for the C drive, the others change it yourself. Hehe.

How to solve the confusion of computer keyboard input.

It is recommended to check and kill the Trojan horse and repair the system.

1. Please use the system's built-in system restore to restore to the time when you do not have this failure (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system).

2. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired ones. Limb resistant.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

Use the system that comes with the system restore method:

The system comes with the system restore: "Kaichang Danshi" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date of the late call date page has a dark date, that is the restore point, after you select, click Next to restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

It should be an occasional error in the system, and the specific reason does not need to be investigated, such as worrying about the error of the hard disk, do the following steps, 1. Use HDTunePro to detect the hard disk"Health"Check whether there is a warning on the hard disk, HDTunePro is more intuitive, and CrystalDiskInfo is also available to see if the hard disk has hidden dangers.

2. Organize with hard disk (measure whether there are many fragments, and organize more 3. It is safer to 1. Backup another copy of important files (U disk, mobile hard disk), 2. Backup another copy of C disk (U disk, mobile hard disk), 4. Use PTDD or DiskGenius to back up a copy of each disk partition table (U disk, mobile hard disk), in case the partition is lost, it can be recovered immediately.

Do the above well, except for the death of the hard disk, there should not be much problem.

Malware can be fixed with 360 Security Guard's computer clinic.

If you don't have antivirus software or the antivirus software version is low, upgrade to the latest version and kill it thoroughly.

Don't be afraid, it's okay, just take the computer as a desertion, it's normal for the computer to have some small problems,

In the control panel, open "Management Tools", open "Computer Management" and select Disk Management, where you can change the drive letter back!