How do I set up high speed printing on the Epson printer LQ 615K ?

I can't print it after setting it up.,Ask God for guidance.。

Hello: Before April 2014, the LQ-630K was adjusted to the ultra-high-speed method

1. Turn off the power of the printer.

2. Press and hold the "Paper Feed and Unwrap Key" and "Pause Key" at the same time, then turn on the power of the printer, press and hold for about 5s, wait for the print head to start moving and then let go, the printer will print out a page of text.

3. Press the line break button 8 times, the power light goes out, and the paper light and pause light flash. (Press it again and again, and the status of the indicator will change every time you press it).

4. Press the paper feed button three times, the power light will go out, the paper shortage light will stay on, and the pause light will stay on. (If you press it three times and the indicator status is incorrect, continue to press).

5. Shut down and complete the setting.

The LQ-630K that left the factory after April 2014 was adjusted to the ultra-high-speed method

1. Turn on the power of the printer and load the printer paper.

Press the "Wrap Page (Under Item)" button and the "Feed Unwinding (On Item)" button at the same time until the printer makes a "beep" sound and the printer starts printing.

2. Press the button "Wrap Line Change Page (under the project)" nine times. After each click, the printer will print a line of text, and after the ninth press will print out the "Chinese character high-speed", you look at what is written behind, if it is not "high-speed" or "ultra-high-speed" to perform the third step, if it is ultra-high-speed, it means that it is already the highest speed, and the fourth step is executed.

3. Press the "Pause (Set)" button. After pressing, "high speed" or "super high speed" will be printed, and then press the pause button, and it will change later, adjust the chain or to the speed you want to perform the fourth step.

4. Press the "Line Wrap Page Change Envy (under the project)" button and the "Feed and Return (on the project)" button at the same time, and the printer will beep to save the settings.

Tools to prepare: Epson LQ-615K dot matrix printer.

1. First of all, Yu Dan is ready, and the printing paper with holes on both sides.

This is shown in the figure below.

2. Turn off the dot matrix printer as shown in the figure below.

3. On the back of the printer, find 2 strips of tape like tank tracks, as shown in the figure below.

4. Set the printing paper with holes on both sides on the track according to the size positioning, as shown in the following figure.

5. On the left side of the front of the printer, find a small megashed switch, as shown in the figure below.

6. This switch has 2 gears, and it can be dialed to the gear of continuous printing, as shown in the figure below.

Tools to prepare: EPSON LQ-615K dot matrix printer.

1. First of all, prepare the printing paper with holes on both sides.

2. Turn off the dot matrix printer.

3. On the back of the printer, find 2 strips of tape like tank tracks.

4. According to the size of the positioning branch, the printing paper with holes on both sides is set on the track.

5. On the left side of the front of the printer, find a small switch.

6. This switch has 2 gears, and you can dial it to the gear of continuous printing.

How the Epson LQ-615K dot matrix printer prints continuously.

Tools to be prepared: EPSON LQ-615K dot matrix printer with hidden answer. 1.

First, prepare the paper with holes on both sides. 2.Turn off the dot matrix printer.

3.On the back of the printer, find 2 strips of tape that look like tank tracks. 4.

According to the size positioning, the printing paper with holes on both sides is set on the crawler 5, on the left side of the front of the printer, find a small switch 6, this switch has 2 gears, dial to the gear of continuous printing and carry it.

You can increase the printing speed by setting Start printing immediately in your computer's print settings.

Let's take Dell laptop as an example to adjust the method of increasing the printing speed of silver Zheng matching:

1. Turn on the computer, find the device and printer in the start menu, and click to enter, as shown in the following figure

2. Find the Epson printer in Devices & Printers, and right-click to select Printer Preferences, as shown in the figure below

3. Find the advanced settings in the printing preferences, and click into the group, as shown in the figure below

4. Finger in the advanced settings to find the use of background printing, so that the program can end the print faster under the Start Print selection, click the selection to speed up the printing speed, as shown in the following figure: